Allo RemoteControl SOMMER 4004 Manuale utente
SOMMER 4004
–
4050
Remote-to-remote programming:
1. Open both remote controls by their sides and connect the two fobs
2. When the LEDs light up and then go off, press the button 1 on the new remote
control and hold it down
3. When The LED of your old remote control comes off, press and hold the
second button until the LED switches off.
4. Your new remote control is programmed!
INSTRUCTIONS
Visit our Website. www.alloremotecontrol.com
Receiver-based programming:
1. Disconnect your receiver. It is located next
to your motor.
2. Open the casing of your receiver
3. On the receiver circuit board (2), connect the
remote control as indicated in the diagram
above (1). The LED on the receiver lights up
(4).
4. Press the button you wish to program on
your new remote control (3). Keep it pressed
down. The LED light on the receiver turns
off. Release the button.
5. Wait 10 seconds
6. Your new remote control is programmed
Visit our Website: www.Alloremotecontol.com
Visit our Website: www.Alloremotecontrol.com
Visit our Website: www.Alloremotecontrol.com
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Allo RemoteControl Telecomando
Allo RemoteControl
Allo RemoteControl CAME T434 Manuale utente
Allo RemoteControl
Allo RemoteControl Prastel SLIM2E Manuale utente
Allo RemoteControl
Allo RemoteControl CARDIN S435 Manuale utente
Allo RemoteControl
Allo RemoteControl FAAC SLH Manuale utente
Allo RemoteControl
Allo RemoteControl SEA Head 433 2 Manuale del proprietario
Allo RemoteControl
Allo RemoteControl WHY EVO Manuale utente
Allo RemoteControl
Allo RemoteControl GENIUS JA334 Manuale utente
Allo RemoteControl
Allo RemoteControl ALLDUCKS 6204 Manuale utente
Allo RemoteControl
Allo RemoteControl NICE HSCU2W Manuale utente
Allo RemoteControl
Allo RemoteControl PROGET ETY 433 4N Manuale utente
