ALTA LABS S8-POE Manuale utente
QUICK START GUIDE
MODEL: S8-POE
1
2
3
4
5678
RESET
PoE+, 54VDC, 0.6A Max
1
Before You Begin
Download the Alta app on your mobile device,
and create your free Alta account.
You may also visit manage.alta.inc to manage
your Alta devices.
manage.alta.inc
2
Package Contents
12 3 4 5 6 7 8
RESET
PoE+, 54VDC, 0.6A Max
S8-POE
Mounting Bracket Mounting Screws
(M3x20mm, Qty. 2)
Anchors
(Qty. 2)
Power Supply
Note: We recommend using the
included mounting hardware for
product installation.
Installation Requirements
•Ethernet cabling (CAT 5 or above)
•Phillips screwdriver (for mounting)
•Pencil (for marking mounting template)
•Drill and drill bit (for mounting)
3
Hardware Overview
Top
The Alta Labs LED on top of the switch flashes
as the unit is powered up. Once fully booted,
the LED will remain lit unless turned off in the
UI. The LED color can also be changed in the
management interface.
Bottom
SN: S8POEAXXWWXXXXXXXXXXXX
Alta Labs - www.alta.inc
192 N Old Highway 91
Hurricane, UT 84737 USA
Model: S8-POE
AC Input: X~XV, X-X Hz, XXA
NCA APPROVED XXXXXXXX
CAN ICES-3(A)/NMB-3(A)
TAXXXX-YYYY
APPROVED
FCC ID: XXXXX-XXXXXX
IC: XXXXX-XXXXXX
Wim Duisenbergplantsoen 31
6221 SE Maastricht, Netherlands
Made in China
SoundVision Technologies, dba Alta Labs
IFETEL: XXXXXXXX
The bottom of the switch has padding for
desktop placement and notches for mounting.
4
Back
Input :
54V 1.3A
Input :
54V 1.3A
Be sure to use the included power cord to
connect power.
Front
12 3 4 5 6 7 8
RESET
PoE+, 54VDC, 0.6A Max
12 3 4 5 6 7 8
RESET
PoE+, 54VDC, 0.6A Max
Reset Button Press down for 10 seconds until
the LED begins flashing to reset the switch to
factory defaults.
5
Ports and LEDs
12 3 4 5 6 7 8
RESET
PoE+, 54VDC, 0.6A Max
12 3 4 5 6 7 8
RESET
PoE+, 54VDC, 0.6A Max
Ports 1-4 support 802.3at PoE+
with up to 30W per port and a
PoE budget of 60 Watts. These
ports are standard Gigabit
Ethernet ports that support
10/100/1000 Mbps connections.
The Link LED on the left indicates
a 10/100 Mbps connection when
amber, blue indicates a 1 Gbps
connection, and if not illuminated,
the connection is down.
The PoE LED on the right will
illuminate amber when a device
connected to the port is being
powered via Ethernet.
Ports 5-8 are standard Gigabit
Ethernet ports that support
10/100/1000 Mbps connections.
The Link LED indicates a
10/100 Mbps connection when
amber, blue indicates a 1 Gbps
connection, and if not illuminated,
the connection is down.
6
Hardware Installation
Mounting On A Wall
1. Locate the template included with the Quick
Start Guide and Safety document.
60 mm
S8-PoE Wall-MountTemplate
Community Forum
forum.
alta.inc
Technical Support
Template
7
2. Position the template in the desired location
and use a pencil to mark the holes.
60 mm
S8-PoEWall-Mount Template
60 mm
S8-PoEWall-Mount Template
Vertical Mount or Horizontal Mount
3. Secure the Mounting Bracket to the wall
using the Mounting Screws and a Phillips
screwdriver. Be sure to use the screws
included with the product.
If mounting on drywall, use the anchors to
ensure secure mounting. Use a 6 mm drill
bit to drill the holes for the anchors and
insert them in the wall.
8
4.Align the switch with the Mounting Bracket.
Note: the Alta Labs A logo should be facing
the same position on the mount and the
switch. Slide the notches over the tabs to
lock the switch into place.
Input :
54V 1.3A
5. Connect the Power Supply to the switch and
the other end to a power outlet.
Input:
54V 1.3A
9
Connecting Devices
Connect devices that need Power over
Ethernet to any of the first four ports. The
ports are autosensing. Devices that do not
require power can be connected to any port.
1
2
3
4
5678
RESET
PoE+, 54VDC, 0.6A Max
Set Up Your Device
Follow the instructions in the Alta app or
management interface to set up your switch.
1.0
bcb923123426
New Switch
Home Base
Set Up
Indice
Altri manuali ALTA LABS Interruttore
