Altinex TP115-111 Manuale utente
TP115-111/Computer/Component AV Twisted Pair Receiver User’s Guide
400-0435-008
1
Welcome!
We greatly appreciate your purchase of the TP115-111 Computer/Component
Video + Audio Twisted Pair Receiver. We are sure you will find it reliable
and simple to use. Superior performance for the right price, backed by solid
technical and customer support is what ALTINEX has to offer.
We are committed to providing our customers with
Signal Management Solutions®to the most demanding audiovisual
installations at competitive pricing and we welcome you to join the ranks of
our many satisfied customers throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your TP115-111. Keep this
manual handy for future reference. These safety instructions are to ensure
the long life of your TP115-111 and to prevent fire and shock hazards. Please
read them carefully and heed all warnings.
1.1 General
Qualified ALTINEX service personnel or their authorized
representatives must perform all service.
1.2 Installation Precautions
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the TP115-111 in direct sunlight, near heaters or heat-
radiating appliances, or near any liquid. Exposure to direct sunlight,
smoke, or steam can harm internal components.
Handle the TP115-111 carefully. Dropping or jarring can cause damage.
Do not pull any cables that are attached to the TP115-111.
1.3 Cleaning
Clean only with a dry cloth. Never use strong detergents or solvents
such as alcohol or thinner. Do not use a wet cloth or water to clean the
unit. Do not open the unit to clean.
1.4 FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions found herein, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Any changes or modifications to the unit not expressly approved by
ALTINEX, Inc. could void the user’s authority to operate the
equipment.
2. Installation Procedures
Step 1. Determine the best location for the TP115-110 and TP115-111. Locate the TP115-110 as close to the video source as possible and the TP115-111 as
close to the receiving component as feasible.
Step 2. Apply power to the TP115-110 using the power adaptor provided. The Power LED should be on and red.
Step 3. Connect the video source to the input of the TP115-110 using a high quality video cable.
Step 4. The Power LED should change from red to green indicating a signal is present.
Step 5. Connect the audio input source to the audio jack on the TP115-110.
Step 6. Run a CAT-5 cable from the 4TP OUTPUT of the TP115-110 to the 4TP INPUT on the TP115 111.
NOTE: Ensure good signal transmission by routing the cable avoiding any sharp angles, creases, or bends.
Step 7. Connect the TP115-111 video and audio outputs to their receiving devices.
NOTE: The L+, L- and GND outputs on the TP115-111 terminal block output contain the mono audio output signal.
The R+ and R- pins are not used.
Step 8. Apply power to the TP115-111 using the power adaptor provided. The Power LED should be on and red; green if a signal is present.
Step 9. The units are now operational.
3. Limited Warranty/Return Policies
Please see the ALTINEX website at www.altinex.com for details on warranty and return policies.
TP115-111 User’s Guide
400-0435-008
2
4. Technical Specifications
Specifications are subject to change. See www.altinex.com for up-to-date information.
Features/Description
TP115-111
General
Inputs
Video + Audio
RJ-45 F (1)
Output
Video
15-pin HD F (1)
Audio
5-pin terminal block (1)
Compatibility
Signal Types
ALTINEX Standard for
Twisted Pair (TP Series)
Video Signal
Resolutions
VGA through UXGA,
480p through 1080i
Recommended Max.
Cable Lengths
Note: Measurements
made using ALTINEX
low-skew cable,
CB3150PV.
VGA: 640x480@60Hz
900 ft (274 m)
XGA: 1024x768@60Hz
700 ft (213 m)
SXGA: 1280x1024@60Hz
650 ft (198 m)
UXGA: 1600x1200@60Hz
600 ft (183 m)
Accessories Included
Power Adapter
+9 VDC, 1.1 A
Table 1. TP115-111 General
Mechanical
TP115-111
Enclosure
0.090 in Al
Color
Black Semi Gloss
Weight
1.0 lb (0.45 kg)
Length
4.58 in (116 mm)
Width
3.50 in (89 mm)
Height
0.96 in (24 mm)
T° Operating
10°C-50°C
T° Maximum
75°C
Humidity
90% non-condensing
MTBF (calc.)
38,000 hrs
Table 2. TP115-111 Mechanical
Electrical
TP115-111
Input
Video + Mono Audio
Video/Sync/Audio Signals
ALTINEX Standard
Output
Video Analog Signal
1.0 Vp-p max.
Video Sync Level
TTL
Audio Signal Level
0 dBu
Power Consumption
External Adapter: 9 VDC
400 mA (3.6 W max.)
Table 3. TP115-111 Electrical
TP115-111 User’s Guide
400-0435-008
3
5. About Your TP115-111
Output - Component/ Computer Video
Input - Twisted Pair encoded AV signal
Audio - Mono
Audio bandwidth 20 Hz to 20 kHz
Horizontal Frequency range 15 kHz to 95 kHz
Vertical Frequency range 50 Hz to 180 Hz
Compact and cost-effective
Uses external power supply
The TP115-111 receives computer video and audio signals over Twisted Pair type (CAT-5) cable when used together with an ALTINEX Twisted Pair transmitter,
such as the TP115-110.
As with the TP115-110, the TP115-111 is streamlined and lightweight for applications that have small space requirements.
This unit offers video equalization to allow for very long cable runs, and a signal detect feature that shows when a signal is present.
The latest generation of Twisted Pair devices uses an innovative, patented technology* developed by ALTINEX. The new signal processing technology allows
transmitting and receiving fully equalized computer video signals, stereo, and audio signals over long distances.
AUDIO
OUTPUT
VIDEO
EQUALIZATION
POWER
4 TP
INPUT
VIDEO
OUTPUT
COMPONENT
COMPUTER/
* US Patent 7,065,190
TP115-111 User’s Guide
400-0435-008
4
6. Application Diagrams
Diagram 1: Typical Setup
TP115-110
TP115-111
TP115-111 User’s Guide
400-0435-008
5
Diagram 2: Internal View
PAIR 1
PAIR 3
PAIR 2
H/W
EQ
SEPARATOR
PAIR 4
DETECT
SIGNAL
R/Pr
G/Y
B/Pb
H
V
POWER
TP115-111
PS
COMPONENT
VIDEO
POWER
2.5mm
9V, 1A
PAIR
RJ-45 SYNC
5-PIN
TERMINAL BLOCK
15-PIN HD
CONNECTOR
COMPUTER/
L+
L- MONO AUDIO
TWISTED
TP115-111 User’s Guide
400-0435-008
6
7. Operation
The TP115-111 requires only one adjustment to be made for optimal
performance. The adjustment is video equalization for long cable lengths.
7.1 Video Equalization
Video equalization is provided to fine-tune the displayed image on the
remote display. Typically, the equalization will be set to near
minimum for short cable runs and near maximum equalization for the
longest runs.
The equalization adjustment on the TP115-111 works together with
the TP115-110 to provide equalization for maximum cable lengths.
For best results, start adjustments with both units and minimum.
Make the adjustments slowly as some monitor take a few seconds to
respond to changes in the equalization setting.
8. Troubleshooting Guide
We have carefully tested and have found no problems in the supplied
TP115-111. However, we would like to offer suggestions for the following:
8.1 No Display
Cause 1: The source has a problem.
Solution:
Check the source and make sure there is a signal present and
all source connections are correct. If the source is working and
there is still no display, see Cause 2.
Cause 2: The path has a problem.
Solution:
Connect the transmitter directly to the receiver using a short
patch cable. If the image is good, there is a problem with the
cable. Otherwise, see Cause 3.
Cause 3: Cable connections are incorrect.
Solution:
Make sure that cables are properly connected. Also, make sure
that the continuity and wiring are good. If there is still no
display present, see Cause 4.
Cause 4: Video equalization required.
Solution:
Adjust the Video Equalization on the TP115-111. Long cable
runs may require adjustment on both the TP115-111 and
TP115-110.
Cause 5: The display has a problem.
Solution:
Make sure the display is powered and is turned on. If there is
still no display, please call ALTINEX at (714) 990-2300.
8.2 No Sound
Cause 1: The source has a problem.
Solution:
Check the source and make sure that there is a signal present
and all source connections are correct. If the source is working
and there is still no sound, see Cause 2.
Cause 2: The volume is too low.
Solution:
Increase the gain at the source toward maximum. If there is
still no sound present, see Cause 3.
Cause 3: Cable connections are incorrect.
Solution:
Make sure that cables are properly connected. Also, make sure
that the continuity and wiring are good. If there is still no
sound, see Cause 4.
Cause 4: The receiving device has a problem.
Solution:
Make sure the receiving device is powered and is turned on. If
there is still no sound, please call ALTINEX at (714) 990 2300.
Altri manuali per TP115-111
1
Indice
Altri manuali Altinex Ricevitore
Altinex
Altinex DA1931CT Manuale utente
Altinex
Altinex TP115-111 Manuale utente
Altinex
Altinex MUSE MU600-001 Manuale utente
Altinex
Altinex INTERA DS801-111 Manuale utente
Altinex
Altinex CAT-5 Receiver Card PE1004CF Manuale utente
Altinex
Altinex Dual Twisted Pair Receiver to Computer / Component Video + Audio... Manuale utente
Altinex
Altinex DA1931CT Manuale utente
Altinex
Altinex TP315-102 Manuale utente
Altinex
Altinex VGA Line Receiver DA103-217 Manuale utente
Altinex
Altinex MULTI-TASKER MT103-123 Manuale utente
