AMAZON COMMERCIAL B07W3CGQM4 Manuale utente
Heavy Duty Infrared Thermometer with Circle Laser, Double
Mould, Type K Probe, Adjustable Emmissivity
Termómetro Infrarrojo para Trabajos Pesados con Láser Circular,
Detector de Moho, Sonda Tipo K, Emisividad Ajustable
Thermomètre Infrarouge Très Résistant avec Laser Circulaire,
Double Moulage, Sonde de Température de TypeK, Émissivité
Réglable
B07W3CGQM4
English . . . . . . . . . . . . . . . . . . . . . . . 3
Français . . . . . . . . . . . . . . . . . . . . . 23
Español . . . . . . . . . . . . . . . . . . . . . 43
3
EN
IMPORTANT
SAFEGUARDS
Read these instructions carefully and
retain them for future use. If this product
is passed to a third party, then these
instructions must be included.
When using electrical appliances, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock, and/or injury to
persons including the following:
WARNING The safety features of this
product may not protect the user if not used in
accordance with this user manual.
• This product must be used by trained users
only.
• Do not use if the product appears damaged or
if it is not working properly. If in doubt, replace
the product.
• Do not attempt repairs. There are no user
serviceable parts.
• Do not deactivate safety systems and remove
explanatory and hazard labels.
• Do not use meter around explosive gases,
vapors, or in damp or wet environments.
4
EN
• Never aim a laser beam at any aircraft. The
laser beam can distract or flashblind pilots. The
laser beam continues to travel even if the light
is no longer visible.
• Ensure adequate safeguards, for example
reflective safety vest, at the surveying site (e.g.
when measuring on roads, construction sites,
etc.).
• Store the product out of reach of children.
Laser Warnings
CAUTION Risk of injury! Looking directly
into the beam with optical aids (e.g. binoculars,
telescopes) can be hazardous.
CAUTION Risk of injury! Never look into the
laser beam and never point it at people or animals.
Laser radiation can seriously damage your eyes.
CAUTION If operation settings or procedures
other than those described in these instructions
are used, it could lead to exposure to dangerous
radiation.
• This device produces a visible laser beam
which is emitted from the front of the product.
• Do not stare into the laser beam or direct it
towards other people.
5
EN
• Blinding by laser radiation can indirectly lead
to serious accidents, especially for people who
are driving a vehicle or operating machinery.
• When operating the laser equipment, always
make sure that the laser beam is directed so
that no one is in the projection area and that
unintentionally reflected beams (e.g. from
reflective objects) cannot be directed into areas
where people are present.
Battery Warnings
• Always insert batteries correctly with regards to
polarity (+ and –) marked on the battery and the
product.
• Do not mix old and new batteries or batteries of
different types or brands.
• Exhausted batteries should be immediately
removed from product and properly disposed.
• Keep batteries out of the reach of children.
• Do not dispose of batteries in fire.
• Remove batteries from product if it is not to be
used for an extended period of time.
• If the battery leaks avoid contact with skin and
eyes. Rinse affected areas immediately with
plenty of clean water, then consult a doctor.
6
EN
Explanation of Symbols
CAUTION The signal word that indicates
a hazard with a low level of risk
which, if not avoided, could
result in minor or moderate
injury.
NOTICE Indicates a practical tip, advice
or practice not related to
personal injury.
General warning sign.
Class II laser product.
CAUTION
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS II LASER PRODUCT
7
EN
Product Description
A
B
G
C
DE
F
K
J
H
L
I
8
EN
ALaser
BInfrared sensor
CDisplay
D
Increase value and laser on/off button
EMODE button
F
Decrease value and backlight on/off button
GThermocouple input
HPower on / measure trigger
IBattery compartment cover
JTripod thread
KWrist strap hole
LThermocouple probe (K-Type)
9
EN
Display
1 2 3 4
5
6
7
8
9
10
11
1Scan mode indicator
2Hold mode indicator
3Laser on indicator
4High and low alarm indicator
5°C °F unit indicator
6Low battery indicator
7Emissivity value
8Measured data for MAX/MIN/DIF/AVG
9MAX/MIN/DIF/AVG indicator
10 K-TYPE mode indicator
11 Measured data
10
EN
Intended Use
• The product is designed for take temperature
measurements up to:
w1832 °F (1000 °C) when using infrared
radiation (IR)
w2498 °F (1370 °C) when using thermocouple
• The product measures the surface temperature
only. It does not measure the internal temperate
of an object.
• The temperature is measured by:
wUsing infrared radiation (IR) and scanning the
infrared energy an object emit, or by:
wUsing thermocouple and getting into a direct
contact with an object's surface.
• The product is especially suited for measuring
the temperature of hot, difficult to reach or
moving objects.
• The product cannot measure through
transparent surfaces, for example glass or
water).
CAUTION This product is not a substitute
for professional medical advice, diagnosis or
treatment.
Indice
Altri manuali AMAZON COMMERCIAL Termometro
