AMD Geode NX 1250 Manuale utente
32603ARevision:
November 2004Issue Date:
AMD Geode™ NX Processor
and Heatsink
Installation Guide
© 2004 Advanced Micro Devices, Inc. All rights reserved.
The contents of this document are provided in connection with Advanced Micro Devices, Inc.
(“AMD”) products. AMD makes no representations or warranties with respect to the accuracy
or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether
express, implied, arising by estoppel or otherwise, to any intellectual property rights is
granted by this publication. Except as set forth in AMD’s Standard Terms and Conditions of
Sale, AMD assumes no liability whatsoever, and disclaims any express or implied warranty,
relating to its products including, but not limited to, the implied warranty of merchantability, fit-
ness for a particular purpose, or infringement of any intellectual property right.
AMD’s products are not designed, intended, authorized or warranted for use as components
in systems intended for surgical implant into the body, or in other applications intended to
support or sustain life, or in any other application in which the failure of AMD’s product could
create a situation where personal injury, death, or severe property or environmental damage
may occur. AMD reserves the right to discontinue or make changes to its products at any
time without notice.
Contacts
www.amd.com
Trademarks
AMD, the AMD Arrow logo, and combinations thereof, and Geode are trademarks of Advanced Micro Devices, Inc.
Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies.
Installation Guide 3
AMD Geode™ NX Processor and Heatsink32603A November 2004
1.0 Introduction
The AMD Geode™ NX 1250@6W processor*and the AMD Geode™ NX 1500@6W processor**
require only a heatsink and can be used in fanless applications. The AMD Geode™ NX 1750@14W
processor*** requires a heatsink and a fan for proper cooling. AMD provides an AVC 212BJ0 heatsink
for the Geode NX 1250@6W processor and Geode NX 1500@6W processor, and a Therma-Flo
E1305 heatsink and fan for the Geode NX 1750@14W processor. See 5.0 Heatsink Information for
heatsink part number information.
Figure 1. AVC Heatsink and Therma-Flo Heatsink with SUNON Fan
The purpose of this document is to provide installation instructions for the AMD Geode NX
processors, their heatsink and, when required, fan.
2.0 Processor Installation
1. Unlock the socket by lifting the lever on the side of the socket up to a 90oangle.
2. Position the processor directly above the socket such that its marked corner is towards the back
of the socket next to the base of the socket lever, as shown in Figure 2.
3. Carefully insert the processor into the socket until it fits in place. The processor only fits in the
correct orientation.
Note: DO NOT force the processor into the socket. Using force could bend the
processor pins.
4. When the processor is in place, hold it firmly in the socket while you push down the socket lever
to secure the processor. The lever clicks on the side tab to indicate that it is locked.
* This processor operates at 667 MHz. Model numbers reflect performance as described here: http://
www.amd.com/connectivitysolutions/geodexpbenchmark.
** This processor operates at 1 GHz. Model numbers reflect performance as described here: http://www.amd.com/
connectivitysolutions/geodexpbenchmark.
***This processor operates at 1.4 GHz. Model numbers reflect performance as described here: http://
www.amd.com/connectivitysolutions/geodexpbenchmark.
AVC Heatsink Therma-Flo Heatsink with Fan
4Installation Guide
32603A November 2004AMD Geode™ NX Processor and Heatsink
Figure 2. Installing the Processor
3.0 AVC Heatsink Installation
1. Before installing the Heatsink, make sure the Heatsink clip pivot is placed in the twelfth gap,
between heatsink fins twelve and thirteen, as shown in Figure 3. The clip fits down in the large
slot that runs across the heatsink. Use caution to not disturb the white thermal paste on the bot-
tom of the heat sink.
2. Carefully mount the heatsink over the processor in the orientation shown in Figure 3.
Figure 3. Mounting the Heatsink over the Processor
3. Connect the metal heatsink clip at the front-side of the processor socket as shown in Figure 4.
Figure 4. Connecting the Heatsink Clip at the Front of the Processor Socket
Processor Locked in PlaceMarked Corner of ProcessorEmpty Socket with Lever Raised
Socket Back
Socket Front
Short Segment Long Segment
Twelfth Gap Notch in Heatsink
Socket Lever in
Locked Position
Notch in Heatsin
k
Socket Front
Installation Guide 5
AMD Geode™ NX Processor and Heatsink32603A November 2004
4. Connect the other end of the metal heatsink clip at the back-side of the processor socket using a
flat head screw driver, as shown in Figure 5.
Figure 5. Connecting the Heatsink Clip at the Back of the Processor Socket
4.0 Therma-Flo Heatsink Installation
1. Before installing the Heatsink, remove the thin plastic cover attached to the thermal paste. Be
careful NOT to remove the thermal paste.
Figure 6. Removing the Thermal Paste Covering
2. Carefully mount the heatsink over the CPU in the orientation shown in Figure 7. Center the
heatsink over the processor with the metal thumb clip towards the back-side of the processor
socket.
Figure 7. Placing the Heatsink Over the Processor
To p V i ew
Side View
Socket Front
Socket Front
6Installation Guide
32603A November 2004AMD Geode™ NX Processor and Heatsink
3. Connect the metal heatsink clip at the front-side of the processor socket as shown in Figure 8.
Figure 8. Heatsink Clip Connected to Front of Processor Socket
4. Connect the other end of the metal heatsink clip at the back-side of the processor socket, as
shown in Figure 9.
Figure 9. Heatsink Clip Connected to Back of Processor Socket
5.0 Heatsink Information
5.1 AVC Heatsink Assembly Part Numbers
• Heatsink Assembly Reference Number – S7YBJ00001
• Heatsink Part Number – 212BJ0
• Heatsink Clip Part Number – 50209064
• Thermal Grease Part Number – CL10012 (size: 16X16mm, DC340)
• Vacuum Cover Part Number – A717000006
5.2 Therma Flo Heatsink Assembly Part Numbers
• Heatsink Part Number – E1305
• Heatsink Clip Part Number – 3125FCPU69MM
5.3 SUNON Part Number
• Fan Part Number – KD1204PFS
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali AMD Hardware per computer
AMD
AMD CrossFire 480X Manuale di istruzioni
AMD
AMD Athlon Manuale utente
AMD
AMD ATHLON K Istruzioni per l’uso
AMD
AMD NVMe/SATA RAID Manuale utente
AMD
AMD Phenom II Manuale operativo
AMD
AMD SP5100 Guida del prodotto
AMD
AMD Athlon 6 Manuale utente
AMD
AMD Athlon Processor x86 Manuale utente
AMD
AMD RX881 Guida del prodotto
AMD
AMD NOVELL 64 Manuale utente
AMD
AMD MulTView ALL-IN-WONDER 9700 PRO Manuale utente
AMD
AMD Athlon XP 10 Manuale utente
AMD
AMD AMD Athlon 64 Manuale di istruzioni
AMD
AMD ADA3800DAA5BV Manuale operativo
AMD
AMD Turion 64 Manuale operativo
AMD
AMD Geode SC2200 Guida del prodotto
AMD
AMD Opteron 4200 Series Manuale utente
AMD
AMD 3200 - Athlon 64 2.0 GHz Processor Manuale utente
AMD
AMD XILINX T2 Telco Manuale utente
AMD
AMD 3800 - Processor - 1 x Athlon 64 Foglio di istruzioni
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
