Amer.com WAP200N Manuale utente
WAP200N Wireless-N AP
WAP200N Wireless-N AP
Copyright Statement
is the registered trademark of Amer.com
Corp. All the products and product names mentioned
herein are the trademarks or registered trademarks of
their respective holders. Copyright of the whole
product as integration, including its accessories and
software, belongs to Amer.com Corp. Without the
permission of Amer.com Corp, any individual or party
is not allowed to copy, plagiarize, or translate it into
other languages.
All the photos and product specifications mentioned in
this manual are for references only. Due to firmware
updates, some of the screen shots may be different.
Amer Networks is not responsible for informing you in
advance, about these changes. If you want to know
more about our product information, please visit our
website at www.amer.com
WAP200N Wireless-N AP
Content
Chapter 1 Product Overview .........................1
1.1 Features ..........................................2
1.2 Package Contents..............................3
1.3 LED Indicator and Panel Description.....4
Chapter 2 Hardware Installation....................8
Chapter 3 Web Configuration ......................10
3.1 Web Login......................................10
3.2 Wizard...........................................12
3.3 Running Status...............................13
3.4 LAN Settings ..................................14
Chapter 4 Wireless Settings........................16
4.1 Working Mode.................................16
4.1.1 Access Point (AP) Mode ..............17
4.1.2 P2P (Point to Point) Bridge Mode..33
4.1.3 P2MP Bridge Mode.....................38
4.1.4 Wireless Repeater Mode .............43
4.1.5 Wireless Client Mode..................50
4.2 Advanced Settings ..........................54
WAP200N Wireless-N AP
4.3 WPS Settings..................................56
4.4 Access Control................................58
4.5 Connection Status...........................60
4.6 PING.............................................61
Chapter 5 SNMP Setting.............................62
5.1 SNMP Introduction ..........................62
5.2 SNMP Setting .................................63
Chapter 6 System Tools .............................65
6.1 Password Change............................65
6.2 Restore to Factory.............................66
6.3 Backup/Restore ..............................67
6.4 Time Settings.................................68
6.5 Reboot System ...............................69
6.6 Firmware Upgrade...........................69
6.7 Syslog...........................................71
Appendix I: Glossary .................................72
Appendix II: TCP/IP Address Setting (Take Winxp
as example) .............................................75
WAP200N Wireless-N AP
Chapter 1 Product Overview
WAP200N is an IEEE802.11n (Draft 2.0)-compliant
wireless access point with one Gigabit LAN switch port,
which utilizes the latest MIMO technology and provides
up to 300Mbps stable transmission rate from wireless
radio to wired network. With backward compatible
with IEEE802.11b/g device, it is suitable for SOHOs
and small-sized enterprises to share the wireless
network.
WAP200N supports five working modes: wireless AP
mode for other wireless access; Repeater mode for
relaying wireless network coverage; P2P, P2MP mode
for bridging two or more wireless network and wireless
client mode. It supports multiple encryption methods
like 64/128bit WEP, WPA, WPA2 and WPA&WPA2 to
protect you network against malicious attack, and
WPS can free you from remembering long passwords.
Power over Ethernet support can utilize data
transmission and power supply via one Ethernet cable.
Moreover, SNMP and Web-based management
interface can help users easily configure the device.
1
WAP200N Wireless-N AP
1.1 Features
¾Complies with IEEE802.11n (Draft 2.0),
IEEE802.11b and IEEE802.11g standards
¾Supports five working modes: wireless AP,
Repeater, P2P, P2MP and wireless client
¾Provides 300Mbps receiving rate and 300Mbps
sending rate
¾MIMO technology utilizes reflection signal to
increase 8 times transmission distance of original
802.11g standard and reduces the "dead spots" in
the wirelesscoveragearea
¾Provides one Gigabit Auto-negotiation RJ45 port
for LAN connection
¾Supports two power options: Power over Ethernet
and external power adapter
¾Supports SNMP and Web-based management
interface
¾Supports 64/128bit WEP encryption
¾Supports multiple encryption methods as WPA,
WPA2 and WPA&WPA2 and security mechanism
¾Supports WPS (PBC and PIN) encryption method
to free you from remembering long passwords
¾Supports five connection modes: AP, WDS P2P
2
WAP200N Wireless-N AP
Bridge, WDS P2MP Bridge, WDS AP Bridge and
Client
¾Supports Auto MDI/MDIX
¾Supports Firefox1.0, IE5.5 or above
¾Supports authorization access for over thirty-two
MAC addresses
¾Supports auto wireless channel selection
¾Provides three detachable antennas
A Wireless local network is used in a planned
environment where each access point is located
permanently and with a stable radio coverage area.
The AP (Access Point) will provide wireless
communication service for all users located around the
access point.
1.2 Package Contents
Please unpack the package and find the following
items:
¾One WAP200N Wireless AP
¾One Power Adapter
¾One Quick Installation Guide
¾One CD-ROM
3
WAP200N Wireless-N AP
If any of listed items are missing or damaged, please
contact the Amer.com reseller from whom you
purchased for replacement immediately.
1.3 LED Indicator and Panel Description
zLED indicator description on front panel
(from L to R)
WPS
When blinking, it indicates the device is
negotiating with a client in WPS mode.
4
WAP200N Wireless-N AP
POWER
When it turns green, indicates the unit has power.
SYS
When it turns green, a blinking light indicates the
system is running correctly.
WLAN
Wireless signal LED indicator. When it turns green,
it indicates the wireless function is enabled;
blinking indicates the device is transmitting
and/or receiving data.
LAN
Wired local network LED indicator. It indicates the
device is connected with an Ethernet device;
green indicates the link speed is 1000Mbps;
orange indicates the link speed is 10/100Mbps;
blinking indicates the device is transmitting
and/or receiving data.
5
WAP200N Wireless-N AP
zRear Panel From L to R：（ ）
POWER
The jack is used to connect the included 12V DC
power adapter.
LAN
The Gigabit Ethernet port is for a computer’s
NIC or a switch connection. It can also be used
as a PoE interface. When PoE or the external
power adapter are available, the include power
adapter is preferred.
RESET/WPS
Recessed button is for system reset and WPS.
When you press this button for 7 seconds, the
device will restore the configured settings to
factory default settings. When you press it for 1
6
Indice
