AMES 64018 Istruzioni per il montaggio

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5

65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

Owner’s Manual & Safety Instructions

Save This Manual%Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 17k

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

;*,9%$."#%5,$*(",7%+*2&(*%'#"83%$."#%/(&9'4$1%

<,"7'(*%$&%9&%#&%4,8%(*#'7$%"8%#*("&'#%"8='(>1%

?@!6%ABC?%D@EF@G1

Page 2 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 64018

?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS

A,+7*%&2%T&8$*8$#

Safety ..........................................2

Specifications ..............................5

Setup ...........................................6

Operation ..................................... 8

Maintenance ...............................11

Warranty .....................................12

U@;ECEV%?QDWRG?%@EX%X6<CECACRE?

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Page 3<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 64018

?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS

CDSR;A@EA%?@<6AQ%CE<R;D@ACRE

?,2*$>%U,(8"83#%,89%S(*4,'$"&8#

;*,9%,77%#,2*$>%),(8"83#%,89%,77%"8#$('4$"&8#1%%

Failure to follow the warnings and instructions may result

in electric shock, fire and/or serious injury.

?,Y*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1

1. Electrical shock can cause death

or injury! NEVER TOUCH exposed

conductors of electricity.

2. A*#$%4,+7*%Y&7$,3*#%)"$.%4,(*1

3. Inspect the Multimeter before

use. In addition to a general

inspection, look specifically for:

a. Pay special attention to the

insulation protecting the connectors.

b. Check the leads for exposed metal,

damaged insulation, and continuity.

c. Replace damaged test lead

immediately, before use.

4. Do not use the Multimeter if:

a. Either of the test leads are

damaged in any way.

b. Test leads are dirty or

have residue on them.

c. The battery is low.

d. Near any explosive

gasses or fumes.

e. Any abnormal operation is

detected.

(If in doubt about the

condition of the Meter, have

it serviced before use.)

f. The battery cover is open.

5. Power this Meter using only

the battery(ies) referenced in

the Specifications Chart.

6. Use caution when working near

voltages above 30 VAC rms, 42 VAC

peak, or 60 VDC. Voltages this high

present a risk of electric shock.

7. Disconnect the circuit’s power

before connecting the Meter in

series, when measuring current.

8. Connect the common (COM) test

lead first and disconnect it last.

9. Hold the probes with fingers

behind guards.

10. Avoid electrical shock. Use extreme

caution when working near uninsulated

conductors or bus bars. Prevent body

contact with grounded surfaces such

as pipes, radiators, ranges, and cabinet

enclosures when testing voltages.

11. Observe work area conditions. Do

not test voltages in damp or wet

locations. Don’t expose to rain.

Keep work area clean and well lit.

12. Keep children away. Children must

never be allowed in the work area.

13. Stay alert. Watch what you are doing,

use common sense. Do not operate

any meter when you are tired.

14. Do not operate meter if under the

influence of alcohol or drugs. Read

warning labels on prescriptions to

determine if your judgment or reflexes

are impaired while taking drugs. If there

is any doubt, do not operate the meter.

Page 4 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 64018

?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS

15. People with pacemakers should

consult their physician(s) before

use. Electromagnetic fields in close

proximity to heart pacemaker could

cause pacemaker interference

or pacemaker failure.

16. Do not test voltage on circuits

higher than 300 volts.

17. Do not test current on circuits

higher than 400 milliamps.

18. Dress properly. Protective,

electrically nonconductive

clothes and nonskid footwear are

recommended when working.

19. Wear ANSI-approved safety

goggles during use.

20. Only use accessories intended

for use with this meter.

21. Avoid damaging meter. Use only

as specified in this manual.

22. Prior to testing resistance, diodes,

or continuity; disconnect all power

to the circuit and discharge all

high-voltage capacitors.

23. Performance of this meter may vary

depending on battery condition.

24. Use the proper settings, terminals,

techniques, and range for the

tests performed. Start with the

range stated in the instructions.

25. Do not apply voltage to the Test

Leads when the Multimeter is in

the Ohms testing setting. Damage

can occur to the Meter.

26. Do not switch between testing

modes with the multimeter

connected to a circuit.

27. Do not use the meter at a setting

marked as blank on the scale.

28. Have the Multimeter calibrated by

a qualified technician every year

to maintain accurate results.

29. Do not disassemble charger;

take it to a qualified technician

when service or repair is required.

Incorrect reassembly may result

in a risk of electric shock or fire.

30. The warnings, cautions, and

instructions discussed in this

instruction manual cannot cover all

possible conditions and situations

that may occur. It must be understood

by the operator that common sense

and caution are factors which cannot

be built into this product, but must

be supplied by the operator.

%?@!6%AB6?6%CE?A;FTACRE?1

Page 5<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 64018

?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS

?/*4"2"4,$"&8#

DC Voltage Ranges: 400mV / 4V / 40V / 300V

DC Voltage Accuracy (@400mV - 40V) ± 0.5% of rdg + 3D

(@300V) ± 0.8% of rdg + 3D

DC Current Ranges: 40mA / 400mA

DC Current Accuracy ± 2.0% of rdg + 3D

AC Voltage Ranges: 4V / 40V / 300V

Frequency Range:

(@4V - 40V) 50-400Hz;

(@300V) 50-60Hz

AC Voltage Accuracy (@4V - 40V) ± 0.8% of rdg + 4D

(@300V) ± 1.0% of rdg + 4D

AC Current Ranges: 40mA / 400mA

AC Current Accuracy ± 3.0% of rdg + 4D

Resistance Ranges: 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ

Resistance Accuracy (@400Ω - 4MΩ) ± 1.0% of rdg + 3D

(@40MΩ) ± 2.0% of rdg + 4D

Capacitance Ranges: 4nF / 40nF / 400nF / 4μF / 40μF / 100μF

Capacitance Accuracy (@4nF) ±5% of rdg + 10D

(@40nF) ± 4.0% of rdg + 5D

(@400nF - 100μF) ± 3.0% of rdg + 3D

Continuity Meter beeps at < 50Ω

Frequency Range: 10Hz - 100kHz

Frequency Accuracy ± 0.5% of rdg + 3D

Operating Temperature Range: 32°F - 104°F (0°C - 40°C)

Display LCD

Fuse F 400mA (300V)

Battery 2x LR44 (Included)

Page 6 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 64018

?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS

?*$'/%K%W*2&(*%F#*-

% ;*,9%$.*%6EAC;6%CDSR;A@EA%?@<6AQ%CE<R;D@ACRE%#*4$"&8%

,$%$.*%+*3"88"83%&2%$."#%5,8',7%"847'9"83%,77%$*Z$%'89*(%

#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

<'84$"&8#

CAT III 300V 300V 400m A MA X

R<<

HOLD

SELEC T

?*7*4$%W'$$&8

X"#/7,>

B&79%W'$$&8

;&$,(>%?)"$4.

A*#$%G*,9#

Page 7<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 64018

?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS

X"#/7,>

?>5+&7 X*#4("/$"&8

@T Alternating current

XT Direct current

Continuity

Diode test

Battery low

Ω, kΩ, MΩ Ohms, Kiloohms, Megaohms (Resistance)

nF, μF, mF Nanofarad, Microfarad,

Millifarad (Capacitance )

5!I%! Millivolts, Volts (Voltage)

5@ Milliamperes (Current)

Hz, kHz Hertz, Kilohertz (Frequency)

Indicates that display data is being held

Auto-range

Page 8 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 64018

?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS

R/*(,$"83%C8#$('4$"&8#

% ;*,9%$.*%6EAC;6%CDSR;A@EA%?@<6AQ%CE<R;D@ACRE%#*4$"&8%

,$%$.*%+*3"88"83%&2%$."#%5,8',7%"847'9"83%,77%$*Z$%'89*(%

#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

Electrical shock can cause death or injury! NEVER TOUCH

*Z/&#*9%4&89'4$&(#%&2%*7*4$("4"$>1

V*8*(,7%R/*(,$"83%C8#$('4$"&8#

E&$*- This Meter automatically selects the appropriate range for each

measurement, as necessary. Manual range selection is not available.

X,$,%B&79

The data hold function keeps the current reading on the Display. To activate data hold:

1. Press the BRGX button and current

reading will be held on the Display.

The symbol appears.

2. Press BRGX again or turn Rotary

Switch to release the hold.

D*,#'(*5*8$%R/*(,$"&8

E&$*- Test Lead probes have removable covers for overvoltage

protection. With covers in place, Test Leads are rated for CAT III 300V

protection. Exposed probes are rated for CAT II 300V protection.

@T0XT%!&7$,3*%D*,#'(*5*8$

Measure AC conductors carrying

up to 40 VAC, 50-400 Hz and

up to 300 VAC, 50-60 Hz.

Measure DC conductors

carrying up to 300 VDC.

WARNING! Use caution when working

near voltages above 30 VAC rms,

42 VAC peak, or 60 VDC. Voltages this

high present a risk of electric shock.

1. Turn Rotary Switch to the %position.

2. Press ?6G6TA button to choose

between AC and DC voltage.

3. Carefully touch exposed

conductors with tips of probes.

4. Read measured voltage on the Display.

For AC voltage, polarity is shown.

5. When testing is complete, turn Rotary

Switch to R<< and store Meter.

Page 9<&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1Item 64018

?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS

;*#"#$,84*%D*,#'(*5*8$

Measure circuit resistance up to 40M Ohms.

WARNING! To prevent electric shock, turn

off all power and fully discharge capacitors

on the circuit under test before measuring.

1. Turn the Rotary Switch

to the Ω position.

2. Carefully touch exposed

conductors with tips of probes.

3. Read measured resistance

on the Display.

4. When testing is complete, turn Rotary

Switch to R<< and store Meter.

E&$*- Sometimes the resistor value and

measured resistance differ. This is due

to the Meter’s output test current going

through all possible paths between leads.

E&$*- For resistance measurements

above 1MΩ, allow a few seconds

to get a steady reading.

E&$*- When leads are disconnected

or measurement is out of

range, RG is displayed.

T&8$"8'"$>%D*,#'(*5*8$

Test continuity between two

points of a circuit.

WARNING! To prevent electric shock, turn

off all power and fully discharge capacitors

on the circuit under test before measuring.

1. Turn the Rotary Switch to

the % position.

2. Press ?6G6TA until is displayed.

3. Connect the test leads across

the circuit to be measured.

4. Read measured resistance on the

Display. If the measured resistance

is less than 50Ω, Meter will beep.

5. When testing is complete, turn Rotary

Switch to R<< and store Meter.

E&$*- If Test Leads are open or

the resistance of the circuit is out

of range, RG is displayed.

X"&9*%D*,#'(*5*8$

Test voltage drop in diodes.

Open circuit voltage is 1.5V.

WARNING! To prevent electric shock, turn

off all power and fully discharge capacitors

on the circuit under test before measuring.

1. Turn the Rotary Switch to

the % %position.

2. Connect red probe to diode’s anode

and black probe to its cathode.

3. Read measured forward-biased

voltage drop on the Display.

E&$*- If the test leads are reversed

or open, RG is displayed.

4. When testing is complete, turn

Rotary Switch to R<< and store Meter.

Page 10 <&(%$*4.8"4,7%H'*#$"&8#I%/7*,#*%4,77%JKLLLKLMMKNOPO1 Item 64018

?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS

<(*H'*84>%D*,#'(*5*8$

Measure frequency up to 100kHz.

1. Turn the Rotary Switch

to the B[%position.

2. Connect the Test Leads across

the circuit to be measured.

3. Read measured frequency

on the Display.

4. When testing is complete, turn

Rotary Switch to R<<%and store Meter.

T,/,4"$,84*%D*,#'(*5*8$#

Measure capacitance up to 100μF.

WARNING! Turn off all power and fully

discharge capacitors on the circuit

under test before measuring.

1. Turn the Rotary Switch

to the position.

2. Carefully touch capacitor

leads with tips of probes.

3. Read measured capacitance

on the Display.

4. When testing is complete, turn

Rotary Switch to R<< and

store capacitor and Meter.

T'((*8$%D*,#'(*5*8$

Measure AC and DC conductors

carrying up to 400 milliamperes.

E&$*- Amperage is always tested

in series with circuit under test.

1. Turn the Rotary Switch to the

5@ position.

2. Press ?6G6TA button to choose

between AC and DC current.

3. Connect the Test Leads across

the circuit to be measured.

4. Read measured frequency

on the Display.

5. When testing is complete, turn Rotary

Switch to R<< and store Meter.

Indice

Altri manuali AMES Multimetro

AMES

AMES 64021 Istruzioni per il montaggio

Manuali Multimetro popolari di altre marche

Agilent Technologies

Agilent Technologies 34420A Manuale utente

Fluke

Fluke 83 Manuale utente

Hameg

Hameg HM 8012 Manuale utente

Mastech

Mastech MY70 Manuale utente

Steren

Steren MUL-300 Manuale utente

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuale utente

PeakTech

PeakTech 4000 Manuale per l'uso e la cura

YOKOGAWA

YOKOGAWA 90050B Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuale utente

Fluke

Fluke 8846A Manuale operativo e di manutenzione

Tempo Communications

Tempo Communications MM200 Manuale utente

Elenco Electronics

Elenco Electronics CM-1555 Manuale utente

Mastech

Mastech MS8238C Manuale utente

SDAR

SDAR 830A, 830B, 830D, 830C Manuale utente

RS PRO

RS PRO RS-9519BT Manuale utente

BGS technic

BGS technic 8890 Manuale utente

Amprobe

Amprobe Hexagon 60 Manuale utente