AMP Lighting TieredPro Path Light Istruzioni operative e di sicurezza

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP®TieredPro Path Light

AAR-3511-B-BZ

AMP®TieredPro Path Light

AAR-3511-B-BZ

Important Safety Instructions: Read Before Installation

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

[email protected] • 813.978.3900

Parts Required

–3–

Package Contents

Install Stake

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-

age lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Product Dimensions

A. (1) TieredPro Hat C. (1) Stake

B. (1) 6” Stem

A. (1) Bulb

4.25”

11.5”

4.75”

Board

Stake

Soil

Ground

Determine the desired location for mounting

the luminaire. Hammer the stake into the

ground until ange of stake is ush to grade.

To avoid damage to the stake, place a board on

top of the stake while hammering.

NOTE: If the ground is hard and the stake

is difcult to install, make a crosscut in the

ground using a at shovel.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

Wire Connection

Install Stem to Stake

[email protected] • 813.978.3900

–5–

Install Bulb

AMP®TieredPro Path Light

AAR-3511-B-BZ

Install TieredPro

Install/Replace Bulb

6” Stem

Socket

Stake

Pigtail

Wireway Slot

Clear away an area in the ground at

the wireway slot on top of the stake.

Lay the luminaire pigtail into the

wireway slot and screw the stem onto

the stake. If the xture does not look

straight, adjust by pushing or pulling

on the stake only. Use a bubble level

against the side of stem to make

sure the stem is perpendicular to the

ground.

Pigtail

Main Supply Cable

Wire Connectors

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main low

voltage supply cable leads.

Socket

Bulb

Insert the bulb with the correct wattage

and type marked on the luminaire label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle bulb.

Place the TieredPro hat over the bulb

and thread onto the top end of the

stem. Hand tighten until snug.

TieredPro Hat

Bulb

Stem

Please reverse Step 2 - Step 4 to expose the bulb and replace it with the

correct wattage and type marked on the luminaire label. Reinstall inner

lens and shade.

IMPORTANT: Bi-Pins must be protected from moisture and dust at all times.

Always reinstall shade and lens when moved.

–6–

www.amplighting.com

–6–

[email protected] • 813.978.3900

–7–

INSTALLATION & MAINTENANCE GUIDE

AMP®TieredPro Path Light

AAR-3511-B-BZ

Replace Lens

Remove TieredPro Hat

Loosen the TieredPro hat and remove

it from the top end of the stem by

pulling it up and over the bulb.

Stem

TieredPro Hat

Replace Lens

Loosen the screws from the bottom of

the TieredPro Hat. Remove the bottom

tier to expose the lens and replace

it with the new replacement shade.

Reinstall the bottom tier to hold the

shade and secure it with the screws

removed previously. Tighten until snug.

Reinstall the TieredPro hat onto the

stem.

Bottom Tier

TieredPro Hat

Lens

IS-AAR-3511-B-BZ.ver1

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Indice

Altri manuali AMP Lighting Illuminazione del paesaggio

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting EscherPro AAL-1023 Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting ONE ControlPro AAL-1813IR-40-BBZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting Deck-DesignPro Classic Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting ASDL-2014-P-WH Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3031-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting ASSI-9008-50-BK Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-301X-XX-4-B-BZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3016-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-30XXIR Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3011-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-4011-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting DecoPro ADL-2012-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AlpinePro Path Light Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-40 B-BZ Series Istruzioni operative e di sicurezza

Manuali Illuminazione del paesaggio popolari di altre marche

Intex

Intex SL1006 Manuale utente

LED Group

LED Group ROBUS R2IN13W Manuale utente

Patriot Lighting

Patriot Lighting 343-1484 Manuale utente

Hess

Hess SERA G: SERA S Manuale utente

LIGMAN

LIGMAN JET 44 Manuale utente

LIGMAN

LIGMAN MALTA 1 Manuale utente

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manuale utente

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manuale utente

Saxby Lighting

Saxby Lighting Islay 68784 Manuale

LIGMAN

LIGMAN EU-10016-3 Manuale utente

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manuale utente

LIGMAN

LIGMAN KI-60475 Manuale utente

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manuale utente

Malibu Boats

Malibu Boats CL905K Manuale utente

LIGMAN

LIGMAN NYB-30161 Manuale utente

LIGMAN

LIGMAN SI-80021 Manuale utente

Volt

Volt 2-in-1 Tiki-Brass Torch Light Manuale utente

Malibu Boats

Malibu Boats CM110P Manuale utente