AMP Lighting VariantPro Spotlight Istruzioni operative e di sicurezza

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP®VariantPro Spotlight

AAL-1010-4-B-BZ

AMP®VariantPro Spotlight

AAL-1010-4-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

[email protected] • 813.978.3900

Product Dimensions

–3–

Install Stake

Board

Stake

Ground Soil

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-

age lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Package Contents

A. (1) Fixture

B. (1) Stake

5 1/2”-7 1/2”

3 1/4”

5 1/2”

2 1/4”

3/4”

Determine the desired location for

mounting the luminaire. Hammer the

stake into the ground until ange

of stake is ush to grade. To avoid

damage to the stake, place a board

on top of the stake while hammering.

NOTE: If the ground is hard and the

stake is difcult to install, make a

crosscut in the ground using a at

shovel.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

Wire Connections

Install Luminaire to Stake

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

Install Bulb

Install Lens

AMP®VariantPro Spotlight

AAL-1010-4-B-BZ

Clear away an area in the ground

at the wireway slot on top of the

stake. Lay the luminaire pigtail

into the wireway slot and attach

the luminaire onto the stake.

Tighten until snug.

Wireway Slot

Pigtail

Luminaire

Wire Connectors

Main Low Voltage

Supply Cable

Pigtail

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main

supply cable leads.

AMP®VariantPro Spotlight

AAL-1010-4-B-BZ

Insert the bulb with the correct

wattage and type marked on the

luminaire label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle bulb.

Thread the lens onto the luminaire

and hand tighten until snug.

Bulb

Socket

Lens

Luminaire

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

[email protected] • 813.978.3900

–7–

Install Glare Guard

Install/Replace Bulb

Place the glare guard onto the lens

and secure it with the lock screw.

Adjust the luminaire to the desired

angle by using the set screw.

Loosen the lock screw to remove the glare guard. Then remove the lens to

expose the bulb. Replace it with the correct wattage and type marked on

the xture label. Then reinstall the lens and glare guard.

IMPORTANT: Bulbs must be protected from moisture and dust at all times.

Always reinstall lens when removed.

AMP®VariantPro Spotlight

AAL-1010-4-B-BZ

Glare Guard

Lock Screw

Lens

Set Screw

IS-AAL-1010-4-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali AMP Lighting Illuminazione del paesaggio

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting 3602 Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3012-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AlpinePro Path Light Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting PinnaclePro Mini Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting ASDL-2014-P-WH Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting PolynesianPro AAR-3518-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting Estate PendantPro ASI-9006-4036-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting MR16 HydraPro Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting Wider NovellePro APL-3026-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-1015-40-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting EquaPro Flood Light Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting NovelPro APL-3021-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting ASSI-9008-50-BK Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting EscherPro AAL-1023 Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting SleekPro MR11 Downlight Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3024-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3015-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting MR16 HydraPro Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Istruzioni operative e di sicurezza

Manuali Illuminazione del paesaggio popolari di altre marche

Intex

Intex SL1006 Manuale utente

LED Group

LED Group ROBUS R2IN13W Manuale utente

Patriot Lighting

Patriot Lighting 343-1484 Manuale utente

Hess

Hess SERA G: SERA S Manuale utente

LIGMAN

LIGMAN JET 44 Manuale utente

LIGMAN

LIGMAN MALTA 1 Manuale utente

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manuale utente

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manuale utente

Saxby Lighting

Saxby Lighting Islay 68784 Manuale

LIGMAN

LIGMAN EU-10016-3 Manuale utente

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manuale utente

LIGMAN

LIGMAN KI-60475 Manuale utente

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manuale utente

Malibu Boats

Malibu Boats CL905K Manuale utente

LIGMAN

LIGMAN NYB-30161 Manuale utente

LIGMAN

LIGMAN SI-80021 Manuale utente

Volt

Volt 2-in-1 Tiki-Brass Torch Light Manuale utente

Malibu Boats

Malibu Boats CM110P Manuale utente