AMP Lighting PinnaclePro Mini Istruzioni operative e di sicurezza

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® PinnaclePro Mini

AAL-1018-4-X-XX

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

[email protected] • 813.978.3900

Product Dimensions

–3–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are suitable

for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.amplighting.com or call 1-813-978-3900.

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Package Contents

A. (1) Fixture

B. (1) Stake

2.75”

4.5”

2.75”

1.75”

Remove Glare Guard and Shield from Fixture

Unlock the set screw and remove the

glare guard from the shield. Loosen the

shield and remove it from the xture.

Glare Guard

Set

Screw

Shield

Fixture

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

Install MR11 Lamp

Insert the lamp with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch lamp with bare

hands. Use soft cloth to handle lamp.

Socket

MR11 Lamp

(sold

separately)

Install Glare Guard and Shield to Fixture

Attach the shield back onto the

xture. Place the glare guard over the

shield and secure with the set screw.

Tighten until snug.

Glare Guard

Set

Screw

Shield

Fixture

Install Stake

Board

Stake

Soil

Ground

Determine the desired location for

mounting the xture. Hammer the stake

into the ground until ange of stake is ush

to grade. To avoid damage to the stake,

place a board on top of the stake while

hammering.

NOTE: If the ground is hard and the stake

is difcult to install, make a crosscut in the

ground using a at shovel.

Install Fixture to Stake

Clear away an area in the ground at

the wireway slot on top of the stake.

Lay the luminaire pigtail into the

wireway slot and screw the xture

onto the stake. Tighten until snug.

Fixture

Pigtail

Wireway Slot

Stake

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

[email protected] • 813.978.3900

–7–

Install/Replace Bulb

AMP®PinnaclePro Spotlight

AAL-1018-4-X-XX

Wire Connections

Strip both leads from the luminaire pigtail. Using two wire connectors (sold

separately), connect the leads from the luminaire to the main supply cable

leads.

Pigtail

Main Supply Cable

Wire Connectors

Remove the glare guard and the shield to expose the lamp and replace

it with the correct wattage and type marked on the xture label. Then

reinstall the shield and the glare guard to the xture.

IMPORTANT: Halogen lamps must be protected from moisture and dust at all

times. Always reinstall the shield when moved.

IS-AAL-1018-4-X-XX-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Altri manuali AMP Lighting Illuminazione del paesaggio

AMP Lighting

AMP Lighting 3601 Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-30XXIR Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3011-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-4014-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting PolynesianPro Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting VariantPro Spotlight Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AAL-1012 Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AlpinePro Path Light Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AMP RGBW Max PinnaclePro LED Spotlight Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AHS-7003-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting EscherPro AAL-1023 Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting EscherPro MR11 Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AFL-4015-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting PinnaclePro APL-3017-4 Series Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3032-26-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting InfusePro AHS- 630X-4-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting APL-3015-B-BZ Istruzioni operative e di sicurezza

AMP Lighting

AMP Lighting ADL-2010 Series Istruzioni operative e di sicurezza

Manuali Illuminazione del paesaggio popolari di altre marche

Intex

Intex SL1006 Manuale utente

LED Group

LED Group ROBUS R2IN13W Manuale utente

Patriot Lighting

Patriot Lighting 343-1484 Manuale utente

Hess

Hess SERA G: SERA S Manuale utente

LIGMAN

LIGMAN JET 44 Manuale utente

LIGMAN

LIGMAN MALTA 1 Manuale utente

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manuale utente

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manuale utente

Saxby Lighting

Saxby Lighting Islay 68784 Manuale

LIGMAN

LIGMAN EU-10016-3 Manuale utente

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manuale utente

LIGMAN

LIGMAN KI-60475 Manuale utente

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manuale utente

Malibu Boats

Malibu Boats CL905K Manuale utente

LIGMAN

LIGMAN NYB-30161 Manuale utente

LIGMAN

LIGMAN SI-80021 Manuale utente

Volt

Volt 2-in-1 Tiki-Brass Torch Light Manuale utente

Malibu Boats

Malibu Boats CM110P Manuale utente