AMX Precis Istruzioni operative originali
ESD Warning
To avoid ESD (Electrostatic Discharge) damage to sensitive components,
make sure you are properly grounded before touching any internal
materials.
When working with any equipment manufactured with electronic
devices, proper ESD grounding procedures must be followed to ensure
people, products, and tools are as free of static charges as possible.
Grounding straps, conductive smocks, and conductive work mats are
specifically designed for this purpose.
Anyone performing field maintenance on AutoPatch equipment should
use an appropriate ESD field service kit complete with at least a
dissipative work mat with a ground cord and a UL listed adjustable wrist
strap with another ground cord. These items should not be manufactured
locally, since they are generally composed of highly resistive conductive
materials to safely drain static charges, without increasing an
electrocution risk in the event of an accident. ESD protective equipment
can be obtained from 3M™, Desco®, Richmond Technology®, Plastic
Systems®, and other such vendors.
Precis Remote X/Y Control Panel I
Important Safety Information
and Instructions
When using and installing your AutoPatch product, adhere to the following basic safety
precautions. For more information about operating, installing, or servicing your
AutoPatch product see your product documentation.
äRead and understand all instructions before using and installing AutoPatch products.
äUse the correct voltage range for your AutoPatch product.
äThere are no user serviceable parts inside an AutoPatch product; service should only
be done by qualified personnel.
äIf you see smoke or smell a strange odor coming from your AutoPatch product, turn
it off immediately and call AutoAssist.
äTurn off and unplug an enclosure before adding or removing boards, unless
otherwise specified in that product’s documentation.
äTo avoid shock or potential ESD (Electrostatic Discharge) damage to equipment,
make sure you are properly grounded before touching components inside an
AutoPatch product.
äFor products with multiple power supplies in each unit, make sure all power supplies
are turned on simultaneously.
äUse surge protectors and/or AC line conditioners when powering AutoPatch
products.
äOnly use a fuse(s) with the correct fuse rating in your enclosure.
äMake sure the power outlet is close to the product and easily accessible.
äMake sure the product is on or attached to a stable surface.
äTurn off equipment before linking pieces together, unless otherwise specified in that
product’s documentation.
äFor safety and signal integrity, use a grounded external power source and a grounded
power connector.
Precis Remote X/Y Control Panel ii
Safety
Information et directives
de sécurité importantes
Veuillez vous conformer aux directives de sécurité ci-dessous lorsque vous installez et
utilisez votre appareil AutoPatch. Pour de plus amples renseignements au sujet de
l’installation, du fonctionnement ou de la réparation de votre appareil AutoPatch,
veuillez consulter la documentation accompagnant l’appareil.
äLisez attentivement toutes les directives avant d’installer et d’utiliser les appareils
AutoPatch.
äLe voltage doit être approprié à l’appareil AutoPatch.
äLes appareils AutoPatch ne contiennent aucune pièce réparable par l’usager; la
réparation ne doit être effectuée que par du personnel qualifié.
äSi de la fumée ou une odeur étrange se dégagent d’un appareil AutoPatch, fermez-le
immédiatement et appelez le Service de soutien technique (AutoAssist).
äFermez et débranchez le boîtier avant d’ajouter ou d’enlever des plaquettes, à moins
d’indication contraire fournie dans la documentation du appareil.
äPour éviter les chocs ou les dommages éventuels causés à l’équipement par une
décharge électrostatique, veillez à ce le dispositif oit bien relié à la terre avant de
toucher les composantes se trouvant à l’intérieur d’un appareil AutoPatch.
äVeillez à ce que tous les blocs d’alimentation des appareils dotés de blocs
d’alimentation multiples dans chaque unité soient allumés simultanément.
äServez-vous de protecteurs de surtension ou de conditionneurs de lignes à courant
alternatif lorsque vous mettez les appareils AutoPatch sous tension.
äPlacez uniquement des fusibles de calibre exact dans les boîtiers.
äVeillez à ce que la prise de courant soit proche de l’appareil et facile d’accès.
äVeillez à ce que votre appareil AutoPatch soit installé sur une surface stable ou qu’il
y soit fermement maintenu.
äFermez toutes les composantes de l’équipement avant de relier des pièces, à moins
d’indication contraire fournie dans la documentation de l’appareil.
äPar mesure de sécurité et pour la qualité des signaux, servez-vous d’une source
d’alimentation externe mise à la terre et d’un connect d’alimentation mis à la terre.
iii Precis Remote X/Y Control Panel
Safety
Notices
AutoPatch©2004, all rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written permission
of AutoPatch. Copyright protection claimed extends to AutoPatch hardware and
software and includes all forms and matters copyrightable material and information now
allowed by statutory or judicial law or here in after granted, including without limitation,
material generated from the software programs which are displayed on the screen such as
icons, screen display looks, etc. Reproduction or disassembly of embodied computer
programs or algorithms is expressly prohibited.
No patent liability is assumed with respect to the use of information contained herein.
While every precaution has been taken in the preparation of this publication, AutoPatch
assumes no responsibility for error or omissions. No liability is assumed for damages
resulting from the use of the information contained herein.
Further, this publication and features described herein are subject to change without
notice. The United States Federal Communications Commission (in 47CFR 15.838) has
specified that the following notice be brought to the attention of the users of this product.
Federal Communication Commission Radio Frequency Interference Statement:
“This equipment generates and uses radio frequency energy and if not installed and used
properly, that is, in strict accordance with the manufacturers instructions, may cause
interference to radio and television reception. It has been type-tested and found to
comply with the limits for a Class B computing device in accordance with the
specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in a residential installation. However
there is no guarantee that interference will not occur in a particular installation. If this
equipment causes interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
äReorient the receiving antenna
äRelocate the matrix with respect to the receiver
äMove the matrix away from the receiver
äPlug the matrix into a different outlet so that computer and receiver are on different
branch circuits
Precis Remote X/Y Control Panel iv
Notices
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find the booklet, How to Identify
and Resolve Radio-TV Interference Problems, prepared by the Federal Communications
Commission to be helpful.”
This booklet is available from the U.S. Government Printing Office, Washington, D.C.
20402, Stock N. 004-000-00345-4.
Use shielded cables. To comply with FCC Class B requirement, all external data
interface cables and adapters must be shielded.
AutoPatch®, AutoAssist®, Precis®,X
NNet™, and XNConnect®are registered trademarks
or trademarks of XNTechnologies, Inc.
MS-DOS®, Windows®, and Window NT®are registered trademarks of Microsoft
Corporation.
3M®, Desco®, Richmond Technology®, and Plastic Systems®are all registered
trademarks.
HyperTerminalÓis a copyright product of Hilgraeve Inc.
Ethernet®is a registered trademark of the Xerox Corporation.
Other products mentioned herein may be the trademarks of their respective owners.
v Precis Remote X/Y Control Panel
Notices
Contents
ESD Warning ...................................................... I
Important Safety Information and Instructions ........................ ii
Notices ...........................................................iv
Chapter 1 – Introducing the Precis Remote Panel
Front of Panel................................................1-2
Rear of Panel ................................................1-4
Technical Support ............................................1-4
Chapter 2 – Installing the Precis Remote Panel
Connecting to an AutoPatch Switcher ..........................2-2
Applying Power ..............................................2-3
Rack Installation .............................................2-4
Linking Multiple Panels........................................2-4
Chapter 3 – Operating the Precis Remote Panel
Executing and Disconnecting Switches .........................3-2
Verifying Signal Routing Status ................................3-3
Executing Local Presets (Macros)..............................3-4
Macro–to–Key Correspondence ..........................3-4
Executing a Local Preset (Macro) ..........................3-5
Chapter 4 – Locking the Precis Remote Panel
Chapter 5 – Adjusting Volume
Chapter 6 – Managing Configuration Files
X Connect ..................................................6-2
Opening and Downloading a Configuration File...................6-3
Modifying a Configuration File..................................6-4
Setting the Password.....................................6-4
Creating Local Presets to Execute as Macros...............6-5
Precis Remote X/Y Control Panel
N
Appendix A – AutoPatch Statement of Warranty
Terms and Conditions ....................................A-1
Appendix B – AutoPatch Service and Returns Policy
Service......................................................B-1
Return Authorizations ....................................B-1
Claims for Shipping Damages .............................B-1
Replacement Policies and Procedures .........................B-2
Special Notice ...............................................B-3
AutoPatch Glossary
Index
Precis Remote X/Y Control Panel
Contents
Introducing
the Precis Remote Panel
Welcome to the Precis Remote X/Y Control Panel Installation &
Operation Guide. This guide contains quick easy-to-follow instructions
for using the Precis Remote Panel to operate Precis Matrix Switchers and
other XNNet compliant switchers.
Like the Precis Front Control Panel, the Precis Remote Panel is available
in two configurations: 8x4 or 12x8, each with or without digital volume
control.
The Precis Remote works the same as the Precis Series Front Control
Panel. Operations are performed in three basic modes: Switch (default),
Status, and Macro. See Chapter 3 for details on using these modes.
See Chapter 4 for details on locking the Precis Remote Panel. If your
system was ordered with optional Volume Control, see Chapter 5 for
details on using the Volume Adjust mode.
This document does not include any detailed information about serial
control or SBCs (Single Bus Controllers). For more information about
these controller types, contact your authorized AutoPatch dealer or
AutoAssist (see Technical Support on page 1-4).
Precis Remote X/Y Control Panel 1-1
Introduction
1.1 Front of Panel
A Precis Remote Panel operates in three standard modes: Switch
(default), Status, and Macro. Use Switch mode to execute switches,
Status mode to verify signal status, and Macro mode to execute macros
(local presets). An additional mode, Lock mode, enables the panel to be
locked. An optional fifth mode, Volume Adjust, is also available on
some panels.
Switch mode is the default mode. It can be accessed at any time by
pressing the Cancel key.
Cancel Key
Returns the Remote Panel to Switch mode from any other mode.
Pressing the Cancel key also cancels an incomplete operation before
returning the system to Switch mode.
Macro Key
Places the Remote Panel in Macro mode, ready to execute macros (see
page 3-5).
Lock Key
Places the Remote Panel in Lock mode, ready to lock (or unlock). This
limits access to the system to prevent accidental switching. A password
number is required to lock and unlock the panel (see page 4-1).
Status Key
Places the Remote Panel in Status mode, ready to verify switching status
(see page 3-3).
1-2 Precis Remote X/Y Control Panel
Introducing the Precis Remote Panel
Introduction
Destination keys Source keys
Level keys
Cancel key
Macro key
(Up Arrow key)
Lock key
(Down Arrow key)
Status key
(Volume Adjust key)
Figure 1: Front view of a 12x8 Precis Remote (37-282) with Volume Control
Altri manuali per Precis
3
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali AMX Pannello di controllo
AMX
AMX Novara CP2000 Series Manuale utente
AMX
AMX Precis Manuale utente
AMX
AMX AutoPatch CP-10 Manuale utente
AMX
AMX Modero X MXT-700 Manuale elenco delle parti
AMX
AMX Modero MXT-2000XL-PAN Manuale utente
AMX
AMX AutoPatch CP-15 Manuale utente
AMX
AMX CP-3017-TR-US Manuale utente
AMX
AMX AutoPatch CP-20A Manuale utente
AMX
AMX AXU-SPPlus Guida
AMX
AMX AutoPatch CP-15 Manuale utente
