AMX I!-FTPSENDER Manuale utente

instruction manual

integration!Solutions

i!-FTPSender

Software Limited Agreement

LIMITED WARRANTY

LIMITED WARRANTY. AMX Corporation warrants that the SOFTWARE will perform substantially in accordance with

the accompanying written materials for a period of ninety (90) days from the date of receipt. Any implied warranties on

the SOFTWARE and hardware are limited to ninety (90) days and one (1) year, respectively. Some states/countries do

not allow limitations on duration of an implied warranty, so the above limitation may not apply to you.

CUSTOMER REMEDIES. AMX Corporation’s entire liability and your exclusive remedy shall be, at AMX Corporation's

option, either (a) return of the price paid, or (b) repair or replacement of the SOFTWARE that does not meet AMX Cor-

poration's Limited Warranty and which is returned to AMX Corporation. This Limited Warranty is void if failure of the

SOFTWARE or hardware has resulted from accident, abuse, or misapplication. Any replacement SOFTWARE will be

warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer.

NO OTHER WARRANTIES. AMX Corporation disclaims all other warranties, either expressed or implied, including, but

not limited to implied warranties of merchantability and fitness for a particular purpose, with regard to the SOFTWARE,

the accompanying written materials, and any accompanying hardware. This limited warranty gives you specific legal

rights. You may have others which vary from state/country to state/country.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES. In no event shall AMX Corporation be liable for any damages

whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss of business

information, or any other pecuniary loss) arising out of the use of or inability to use this AMX Corporation product, even

if AMX Corporation has been advised of the possibility of such damages. Because some states/countries do not allow

the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.

U.S. GOVERNMENT RESTRICTED RIGHTS

The SOFTWARE and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the

Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of The Rights in Technical Data and Com-

puter Software clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Computer Soft-

ware--Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer is AMX Corporation, 3000 Research Drive,

Richardson, TX 75082.

If you acquired this product in the United States, this Agreement is governed by the laws of the State of Texas.

Should you have any questions concerning this Agreement, or if you desire to contact AMX for any reason, please

write: AMX Corporation, 3000 Research Drive, Richardson, TX 75082.

Table of Contents

i!-FTPSender

Table of Contents

Introduction ...............................................................................................................1

Supported Operating Systems .......................................................................................... 1

Minimum PC Requirements .............................................................................................. 1

Installing i!-FTPSender...................................................................................................... 1

Running i!-FTPSender ..............................................................................................3

Programming..................................................................................................................... 3

Channels .................................................................................................................................. 3

Strings ...................................................................................................................................... 3

Send_Commands .................................................................................................................... 3

Example Code.......................................................................................................................... 4

Troubleshooting i!-FTPSender .......................................................................................... 6

Learning More ................................................................................................................... 6

ii i!-FTPSender

Table of Contents

Introduction

i!-FTPSender

Introduction

The i!-FTPSender™allows you to copy a file from one FTP server to another from NetLinx™code.

This is useful to copy files to the NetLinx Master from another FTP server or to copy files from the

NetLinx Master's disc on chip to another FTP server. This module will work between any two FTP

servers; it is not limited to copying files to and from a NetLinx Master.

Supported Operating Systems

 Windows 95®/98®(with at least 48 MB of installed memory)

 Windows NT 4.0®Workstation or Server (service pack 6 B or greater, with at least

64 MB of installed memory)

 Windows 2000®Professional or Server (running on a Pentium 233 MHz processor

(minimum requirement); 300 MHz or faster recommended, with 96 MB of installed

memory.)

 Windows ME®(running on a Pentium 233 MHz processor (minimum requirement);

300 MHz or faster recommended, with 96 MB of installed memory.)

Minimum PC Requirements

 Windows-compatible mouse (or other pointing device)

 At least 5 MB of free disk space (150 MB recommended)

 VGA monitor, with a minimum screen resolution of 800 x 600

 A Network adapter

Installing i!-FTPSender

1. In Explorer, double-click i!-FTPSenderSetup.exe from the directory window where you

downloaded the i!-Email install program.

2. After reading the License Agreement, select I Agree and Next to proceed.

3. The Welcome To i!-FTPSender Setup dialog appears, reminding you to close all Windows

programs before going any further. Click Next to proceed.

4. In the Select i!-FTPSender Install Location dialog, use the Browse button to navigate to a

directory other than the default install directory, if desired. Click Next.

5. In the i!-FTPSender Shortcut Creation dialog, select Install Shortcut Icons for the installed

components on your desktop, if desired.

6. Click Next in the Start i!-FTPSender Installation dialog to install the selected components.

7. The program prompts you to restart your system to complete the installation.

Introduction

2i!-FTPSender

Running i!-FTPSender

i!-FTPSender

Running i!-FTPSender

Programming

i!-FTPSender is a NetLinx module you can add to any program. You interact with the module

through a virtual device supporting:

 Channels

 Strings

 Send_Commands

Channels

The following table lists the channels supported by i!-FTPSender.

Strings

The following table lists the strings supported by i!-FTPSender.

Send_Commands

The following table lists the Send-Commands supported by i!-FTPSender.

i!-FTPSender Channels

Channel Description

250 Channel turns on when the module is communicating with the source server.

251 Channel turns on when the module is communicating with the destination server.

255 When channel is on, debugging messages from the module are printed to terminal.

i!-FTPSender Strings

S:<code> <message> Source server message. Code is the FTP return code and message is a mes-

sage associated with code.

D:<code> <message> Destination server message. Code is the FTP return code and message is a

message associated with code.

i!-FTPSender Commands

COPY-SourceFile[;DestFile]

Copies SourceFile from source

server to destination server.

Syntax:

’COPY-SourceFile[;DestFile]’

Destination file can be specified as DestFile or will default to SourceFile.

Both file names can include a directory path from the root of the FTP server.

Example:

SEND_COMMAND <DEV>,"’COPY-;cSFileName’"

Copies cSFileName from source server to destination server.

VERSION

Prints the module version to the

terminal or telnet window.

Syntax:

’VERSION’

Example:

SEND_COMMAND <DEV>,’VERSION’

Prints the module version to the terminal or Telnet window.

Running i!-FTPSender

4i!-FTPSender

Example Code

(***********************************************************)

(* DEVICE NUMBER DEFINITIONS GO BELOW *)

(***********************************************************)

DEFINE_DEVICE

dvFTPSServer = 0:8:0 // master port for source ftp socket

dvFTPDServer = 0:9:0 // master port for destination ftp socket

TP = 128:1:0

vdvFTPDiag = 33001:1:0 // virtual device for receipt of ftp messages

(***********************************************************)

(* CONSTANT DEFINITIONS GO BELOW *)

(***********************************************************)

DEFINE_CONSTANT

FTPSServerBusy = 250 // flag if source socket is open

FTPDServerBusy = 251 // flag if destination socket is open

(***********************************************************)

(* DATA TYPE DEFINITIONS GO BELOW *)

(***********************************************************)

DEFINE_TYPE

(***********************************************************)

(* VARIABLE DEFINITIONS GO BELOW *)

(***********************************************************)

DEFINE_VARIABLE

CHAR cSourceIP[200]

CHAR cSourceUser[140]

CHAR cSourcePass[140]

CHAR cDestIP[200]

CHAR cDestUser[140]

CHAR cDestPass[140]

CHAR cSFileName[100]

CHAR cDFileName[100]

CHAR cButtonPressed

DEVCHAN dcFTPCopy[] = { {TP,1}, {TP,2}, {TP,3}, {TP,4} }

(***********************************************************)

(* MODULES GO BELOW *)

(***********************************************************)

DEFINE_MODULE 'i!-FTPSenderMod' mdlFTP(vdvFTPDiag,

dvFTPSServer,

dvFTPDServer,

cSourceIP,

cSourceUser,

cSourcePass,

cDestIP,

cDestUser,

cDestPass)

(***********************************************************)

(* THE EVENTS GO BELOW *)

(***********************************************************)

DEFINE_EVENT

(* FTP Copy Button *)

BUTTON_EVENT [dcFTPCopy]

{

PUSH:

Continued

Running i!-FTPSender

i!-FTPSender

{

(* Source Server *)

cSourceIP = '192.168.13.33' // define source IP

cSourceUser = 'NetLinx' // username for above

cSourcePass = 'password' // password for above

(* Destination Server *)

cDestIP = '192.168.13.151' // define destination IP

cDestUser = 'NetLinx' // username for above

cDestPass = 'password' // password for above

SWITCH (GET_LAST(dcFTPCopy))

{

CASE 1:

{

(* File *)

cSFileName = 'ftptest.txt' // filename to copy

(* This will cause the file to be copied! *)

SEND_COMMAND vdvFTPDiag,"'COPY-',cSFileName"

cButtonPressed = 1

}

CASE 2:

{

(* File *)

cSFileName = 'ftptest.txt' // filename to copy

cDFileName = 'dir1\ftptest.txt' // filename to copy

(* This will cause the file to be copied! *)

SEND_COMMAND vdvFTPDiag,"'COPY-',cSFileName,';',cDFileName"

cButtonPressed = 2

}

CASE 3:

{

(* File *)

cSFileName = 'dir1\ftptest1.txt' // filename to copy

cDFileName = 'ftptest1.txt' // filename to copy

(* This will cause the file to be copied! *)

SEND_COMMAND vdvFTPDiag,"'COPY-',cSFileName,';',cDFileName"

cButtonPressed = 3

}

CASE 4:

{

(* File *)

cSFileName = 'dir1\ftptest1.txt' // filename to copy

cDFileName = 'dir2\ftptest.txt' // filename to copy

(* This will cause the file to be copied! *)

SEND_COMMAND vdvFTPDiag,"'COPY-',cSFileName,';',cDFileName"

cButtonPressed = 4

}

(* FTP Activity *)

DATA_EVENT[vdvFTPDiag]

{

STRING:

SEND_STRING 0,"'From FTPModule: ',DATA.TEXT"

}

(***********************************************************)

(* THE ACTUAL PROGRAM GOES BELOW *) Continued

Running i!-FTPSender

6i!-FTPSender

(***********************************************************)

DEFINE_PROGRAM

(* Feedback *)

[dcFTPCopy[1]]=(([vdvFTPDiag,FTPSServerBusy] || [vdvFTPDiag,FTPDServerBusy])

&& (cButtonPressed = 1))

[dcFTPCopy[2]]=(([vdvFTPDiag,FTPSServerBusy] || [vdvFTPDiag,FTPDServerBusy])

&& (cButtonPressed = 2))

[dcFTPCopy[3]]=(([vdvFTPDiag,FTPSServerBusy] || [vdvFTPDiag,FTPDServerBusy])

&& (cButtonPressed = 3))

[dcFTPCopy[4]]=(([vdvFTPDiag,FTPSServerBusy] || [vdvFTPDiag,FTPDServerBusy])

&& (cButtonPressed = 4))

(***********************************************************)

(* END OF PROGRAM *)

(* DO NOT PUT ANY CODE BELOW THIS COMMENT *)

(***********************************************************)

Troubleshooting i!-FTPSender

All interaction with the FTP servers is provided as a string from the virtual device. Most problems

can be resolved by reading the server interaction provided by the strings.

Common problems might be:

 The IP address or host name supplied for the FTP server does not have an FTP server

running.

 The username and/or password may be incorrect.

 The source file does not exist.

 The destination directory does not exist.

 The destination user does not have write access to save the new file.

All of these problems can be solved by watching the strings provided from the i!-FTPSender

module and acting on that information.

This code may not work to FTP files between all FTP servers. Some servers, by default, disable

server to server transfers (also called passive mode) which is used by i!-FTPSender for transferring

files. For instance, Microsoft's IIS disables server to server transfers by default. For more

information, see the Microsoft Support Article at:

http://support.microsoft.com/support/kb/articles/Q247/1/32.ASP.

Learning More

To learn more about FTP file transfers, go to www.protocols.com for general information about

FTP or www.faqs.org/rfcs/rfc959.html (RFC959) for more detailed FTP specifications. For

reference, i!-FTPSender operates under the server-server model described in section 2.3 and the

command sequence outlined in Figure 3 of section 5.2 of Postel & Reynolds' RFC 959.

Indice

Altri manuali AMX Software

AMX

AMX WINMAX MAX SERVER CONTROL SOFTWARE Manuale utente

AMX

AMX NSS-VOTE Manuale utente

AMX

AMX AXT-CA10 Manuale utente

AMX

AMX RMS Manuale di servizio

AMX

AMX I!-PCLINK WEB Manuale utente

AMX

AMX VISUALARCHITECT 1.1 Manuale utente

AMX

AMX RMS Manuale utente

AMX

AMX IREDIT V1.2 Manuale utente

AMX

AMX CAFE DUET STANDARD NETLINX API (SNAPI)... Manuale utente

AMX

AMX G3 Manuale utente

AMX

AMX RMS CODECRAFTER Manuale elenco delle parti

AMX

AMX Camrobotics Manuale utente

AMX

AMX G3 Manuale utente

AMX

AMX AXT-CA10 Manuale utente

AMX

AMX CAFE DUET V1.8 Manuale utente

AMX

AMX KPDESIGN KEYPAD DESIGN PROGRAM Manuale utente

AMX

AMX NetLinx Studio Manuale utente

AMX

AMX G4 PANELBUILDER V1.1 Manuale utente

AMX

AMX AXT-CA10 Manuale utente

AMX

AMX AXCENTWire Manuale utente

AMX

AMX i!-PCLink/PowerPoint Manuale utente

AMX

AMX DESIGN XPRESS HOME THEATER V1.3 - ON SITE INSTALLER... Manuale utente

AMX

AMX I!-DATABASEPLUS AND DBWIZARD Manuale utente

AMX

AMX i!-ConnectLinx Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Canon

Canon Vixia HF21 Manuale utente

Canon

Canon ZR950 Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente