AMX Endeleo UDM 1604 Manuale utente

UDM1604

User Guide

UDM1604

User Guide

- This page intentionally left blank -

Table of contents

Document Details ii

Preface v

Important Safety Markings vi

Environmental Conditions vii

1Hub Configuration 1-1

1.1 Connecting to the Multi Format Video Hub 1-1

1.2 Hub Login 1-1

1.3 Configuring the Hub 1-2

1.3.1 Network configuration 1-2

1.3.2 Date and Time configuration 1-2

1.3.3 Checking the Hub Time 1-3

1.4 Restoring Hub configuration and connections 1-3

1.4.1 Restoring configuration and connections 1-3

1.4.2 Restoring connections on power up 1-4

1.5 Hub Reset 1-4

2Input Configuration 2-1

2.1 Configuring Inputs A-D 2-1

2.2 Configuring TVM (AV) Inputs 2-2

2.2.1 Configuring TVM inputs for a UDM Hub 2-2

2.2.2 Configuring audio types for inputs 2-3

2.3 Cascaded Inputs 2-4

2.3.1 Cascaded Audio 2-4

2.4 Renaming Output Ports 2-4

2.5 Compensating Video at the output ports 2-5

2.5.1 Video Compensation Guidelines 2-5

2.5.2 Video Compensation Modes 2-6

2.5.2.1 Basic Mode 2-6

2.5.2.2 Advanced Mode 2-6

2.6 Compensating video using the Endeleo remote control 2-7

3Device configuration 3-1

3.1 Adding Centrally located devices 3-1

3.2 Issuing controls to a centrally located IR device 3-2

3.2.1 Custom Controls 3-3

4Protocols 4-1

4.1 Creating a Serial Protocol 4-1

4.2 Updating the Endeleo RX unit with the Serial protocol 4-2

4.3 Creating and Learning an Infrared protocol 4-3

4.3.1 Infrared Learning with a device’s remote control 4-3

4.4 Updating the Endeleo RX unit with the Infrared protocol 4-5

4.5 Deleting protocols 4-5

4.6 Deleting all protocols 4-6

5Hub Status 5-1

5.1 Selecting Inputs for display 5-1

5.1.1 Selecting multiple Inputs for display 5-2

5.2 Changing an Input 5-3

5.3 User Control 5-3

5.3.1 Issuing commands to a Port 5-3

5.3.2 Issuing commands to multiple Ports 5-5

5.3.3 Issuing commands to Centrally located Devices 5-5

5.3.4 Assigning a command to an Endeleo RX01 Remote Control 5-6

5.4 Passthrough Mode (Inputs A – D) 5-7

5.4.1 Configuring a Device for Passthrough Mode 5-8

5.4.2 Configuring a Port for Passthrough Mode 5-8

5.5 Passthrough Mode (Inputs TVM-AV1 – TVM-AV4) 5-9

5.6 Using Passthrough Mode 5-10

5.7 Dual output 5-10

5.8 Locking a Port(s) 5-11

6Scheduling events for Inputs and Devices 6-1

6.1 Scheduling an Input 6-1

6.2 Scheduling an event(s) for a Device(s) 6-3

6.3 Configuring the Endeleo RX01 Remote Control for scheduling 6-5

6.4 Advanced Scheduling 6-6

7Advanced Administration 7-1

7.1 Upgrading firmware and Web Pages on a UDM Hub 7-1

7.2 Upgrading Port Controllers 7-2

7.3 Copying the Hub Configuration file 7-3

7.4 Copying protocols between Endeleo RX units 7-3

7.5 Upgrading Input Controllers 7-4

7.6 Backend commands 7-5

7.6.1 Changing the login password 7-5

7.6.2 Obtaining the Hub’s IP address via the Command Line 7-5

7.6.3 Checking port details 7-5

7.6.3.1 Multi format inputs 7-5

7.6.3.2 User outputs 7-6

7.6.4 Hub Temperature 7-7

7.7 Endeleo RX commands 7-7

7.7.1 Viewing the Video Compensation settings 7-7

7.7.2 Resetting Video compensation settings 7-8

7.8 Cascading Hubs 7-8

7.8.1 Configuring a Master Hub 7-8

7.8.2 Cascading two Hubs 7-9

7.8.3 Cascading three Hubs 7-10

7.8.4 Software configuration for cascading hubs 7-11

7.8.4.1 A two hub software configuration scenario 7-11

7.8.4.2 A three hub software configuration scenario 7-12

7.9 Technical data 7-13

7.9.1 Pinouts 7-13

7.9.1.1 HD15 inputs 7-13

7.9.1.2 S-Video pinouts 7-14

7.9.1.3 User Ports 7-14

7.10 Serial connections 7-15

7.10.1 Endeleo Hub serial connection 7-15

7.10.2 Configuring Serial Control via the Endeleo Bowser Interface 7-16

7.10.2.1 Examples of serial controls 7-19

7.10.3 Ascii / Hex conversion 7-20

7.11 Appendix A – Endeleo IR codes 7-21

7.12 Contact details 7-23

Document Details

Endeleo reserve the right to revise this document and to make changes in the

content from time to time without notice.

The latest version of this document can always be found via the partner section

on the web site www.endeleo.com.

About this document

Document Title: UDM Browser Interface User Guide

Version 2.0

Revision 0

Status Released

Author E-Bit Solutions

Owner Endeleo

Internal Location

Date of this version 03/05/2006 20:10:00

Revision History

Version Previous

Version

Date of

Revision/

Version

Author Change Summary

2.0 None 30 August 2006 E-Bit Solutions Reformat

Technical approval

Name Position Company Date

Tom Scott Technical Director Endeleo

Supporting documentation

Title Location

UDM Installation Guide vers 2.0

UDM Quick Configuration Guide

reproduced, stored in a retrieval system or transmitted in any form or by any

means (electronic, mechanical, photocopying, recording or otherwise) without the

prior written permission of Endeleo Limited.

Typographic Conventions

Typeface or

Symbol

Meaning Example

AaBbCc123 Used for:

Commands

Files

Directories

On-screen

computer output

Screen titles

Emphasis

Patches are stored locally in the following

directory:

/program files/endeleo/

AaBbCc123 Used for:

Typed input by

the user

Buttons pressed

by the user

cd /program files/endeleo or

click OK

AaBbCc123 Used for:

Parameters

Sequence Diagram for the UlSampleApp

<AaBbCc123> Used for:

Place holders

Then type rm –r <filename>

www.endeleo.com

Used for:

Hyperlink to

website

Endeleo Website www.endeleo.com

Throughout this guide important warnings, notes and tips will be highlighted as in

the following examples:

Warnings are used to highlight the importance of an action and its consequences:

Warning!

Do not reboot the system at this point!

Notes contain additional information that may be of use or interest to the user:

Note;

The password is case sensitive.

Tips contain information that may be used to reduce effort:

Tip;

Endeleo recommend that the video compensation is

first adjusted to eliminate any skew, using vertical

red / green / blue lines.

Preface

About this manual The following document is designed to provide

basic installation and administration instructions

associated with the Endeleo Multi Format

(UDM1604) Video Switch’s Browser Interface.

It is assumed the installer has a good

understanding of basic networking and video /

audio installation procedures. The guide therefore

only relates to the controls accessible via the

browser interface.

Pre-requisites To configure the system you will require:

•a computer with network connection on the

same subnet as the host and

•a Microsoft Explorer browser application.

Software and firmware

environment

The features and functionality described in this

manual are based on the following firmware;

Controller Receiver FUDM Port

1.35 1.10 1.35 1.11

For the latest details on new firmware and software

releases, please visit the Endeleo web site

www.endeleo.com.

Important Safety Markings

Markings used in this

manual

The following symbols are used on the Endeleo

UDM switch hardware and throughout this Service

Guide to advise you of important instructions. All

maintenance must be carried out by an Endeleo

trained and qualified engineer.

This symbol warns the presence of a voltage of

sufficient magnitude to cause a severe or fatal

electric shock. Follow the appropriate instructions

carefully to avoid the risk of injury.

This symbol indicates an important instruction for

the correct and safe installation, operation or

maintenance of your Endeleo Managed Television

system.

Failure to comply with such instruction may result

in injury to person or damage to the Endeleo

Managed Television hardware.

TESTED TO COMPLY

WITH FCC STANDARDS

FOR HOME OR OFFICE

USE

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

This device may not cause harmful interference.

This device must accept any interference received

including interference that may cause undesirable

operation.

Altri manuali per endeleo UDM 1604

Indice

Altri manuali AMX Interruttore

AMX

AMX Enova DVX-2150HD-SP Manuale utente

AMX

AMX Solecis AVS-SL-0601-848 Manuale utente

AMX

AMX Enova DVX-2100HD Manuale elenco delle parti

AMX

AMX Enova DGX 8 Manuale utente

AMX

AMX AV2SM Manuale utente

AMX

AMX DVX-2250HD-SP Manuale utente

AMX

AMX DCP-MTX Manuale utente

AMX

AMX PLB-AS8 Manuale utente

AMX

AMX endeleo UDM 1604 Manuale utente

AMX

AMX Enova DVX-315 HD Series Manuale utente

AMX

AMX Endeleo UDM-0102 Manuale elenco delle parti

AMX

AMX PT10-PRV 2 X 1 Manuale utente

AMX

AMX Endeleo UDM-0102 Manuale utente

AMX

AMX VPX-1701 Manuale utente

AMX

AMX Solecis SDX-414-DX Manuale utente

AMX

AMX AVS-OP-1515-840 Istruzioni e ricette

AMX

AMX UDM-0808-SIG Manuale utente

AMX

AMX SDX-810-DX Solecis Manuale utente

AMX

AMX DVX-2210HD-SP Manuale utente

AMX

AMX UDM-0808-SIG Manuale elenco delle parti

AMX

AMX NCITE-813 Manuale utente

AMX

AMX RDM-3SWM Guida rapida

AMX

AMX NMX-PRS-N7142 Manuale utente

AMX

AMX Solecis AVS-SL-PR-0401-0601 Manuale elenco delle parti

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente