Analog Devices Blackfin FPGA EZ-Extender Manuale utente
Blackfin®FPGA EZ-Extender®
Manual
Revision 2.0, April 2006
Part Number
82-000920-01
Analog Devices, Inc.
One Technology Way
Norwood, Mass. 02062-9106 a
Copyright Information
©2006 Analog Devices, Inc., ALL RIGHTS RESERVED. This document
may not be reproduced in any form without prior, express written consent
from Analog Devices, Inc.
Printed in the USA.
Limited Warranty
The Blackfin FPGA EZ-Extender is warranted against defects in materials
and workmanship for a period of one year from the date of purchase from
Analog Devices or from an authorized dealer.
Disclaimer
Analog Devices, Inc. reserves the right to change this product without
prior notice. Information furnished by Analog Devices is believed to be
accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use; nor for any infringement of patents or other rights of
third parties which may result from its use. No license is granted by impli-
cation or otherwise under the patent rights of Analog Devices, Inc.
Trademark and Service Mark Notice
The Analog Devices logo, Blackfin, VisualDSP++, EZ-KIT Lite, and
EZ-Extender are registered trademarks of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Regulatory Compliance
The Blackfin FPGA EZ-Extender has been certified to comply with the
essential requirements of the European EMC directive 89/336/EEC
(inclusive 93/68/EEC) and, therefore, carries the “CE” mark.
The Blackfin FPGA EZ-Extender had been appended to Analog Devices
Development Tools Technical Construction File referenced
“DSPTOOLS1” dated December 21, 1997 and was awarded CE Certifi-
cation by an appointed European Competent Body and is on file.
The EZ-KIT Lite evaluation system contains ESD
(electrostatic discharge) sensitive devices. Electro-
static charges readily accumulate on the human
body and equipment and can discharge without
detection. Permanent damage may occur on devices
subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance
degradation or loss of functionality. Store unused
EZ-KIT Lite boards in the protective shipping
package.
Blackfin FPGA EZ-Extender Manual v
CONTENTS
PREFACE
Product Overview ........................................................................... ix
Purpose of This Manual .................................................................. xi
Intended Audience .......................................................................... xi
Manual Contents ........................................................................... xii
What’s New in This Manual ........................................................... xii
Technical or Customer Support ..................................................... xiii
Supported Products ....................................................................... xiii
Product Information ...................................................................... xiv
Related Documents .................................................................. xiv
Notation Conventions .................................................................... xvi
FPGA EZ-EXTENDER INTERFACES
FPGA EZ-Extender Setup ............................................................. 1-1
FPGA Software and Firmware ....................................................... 1-2
FPGA EZ-Extender Overview ....................................................... 1-3
FPGA EZ-EXTENDER HARDWARE REFERENCE
System Architecture ...................................................................... 2-2
Programming the FPGA ................................................................ 2-3
CONTENTS
vi Blackfin FPGA EZ-Extender Manual
FPGA Programming via JTAG ................................................ 2-4
FPGA Programming via Serial ROM ....................................... 2-5
FPGA Programming via Blackfin Application .......................... 2-6
Programming the Serial ROM ....................................................... 2-7
Serial ROM via JTAG Header ................................................. 2-7
Power ........................................................................................... 2-8
Power In Header (P12) ............................................................ 2-9
3.3V Header (P13) .................................................................. 2-9
2.5V Header (P42) ................................................................ 2-10
1.2V Header (P43) ................................................................ 2-10
Jumpers ...................................................................................... 2-11
Serial ROM Boot Jumper (JP1) ............................................. 2-12
Config Done Jumper (JP2) .................................................... 2-12
Config Program Jumper (JP3) ............................................... 2-13
Boot Jumper (JP4) ................................................................ 2-14
FPGA Input Jumpers (JP5) ................................................... 2-14
Push Buttons and LEDs .............................................................. 2-15
Program Push Button (SW1) ................................................. 2-15
PB1 Push Button (SW3) ....................................................... 2-15
PB2 Push Button (SW4) ....................................................... 2-16
Status LEDs (LED1–8) ......................................................... 2-17
Power LED (LED9) .............................................................. 2-17
Done LED (LED10) ............................................................. 2-17
Connectors ................................................................................. 2-18
Blackfin FPGA EZ-Extender Manual vii
CONTENTS
Expansion Interface (P1–3 and J1–3) ..................................... 2-19
IDC Connectors (P8, P14, P16, and P17) .............................. 2-19
IDC Connectors (P5 and P7) ................................................ 2-20
High-Speed Connector (P4) .................................................. 2-20
FPGA EZ-EXTENDER BILL OF MATERIALS
FPGA EZ-EXTENDER SCHEMATIC
Title Page .................................................................................... B-1
FPGA Configuration .................................................................... B-2
SRAM, FPGA, Banks 7 and 8 ...................................................... B-3
Expansion Interface Connector 1 .................................................. B-4
FPGA Banks 0 and 1 .................................................................... B-5
Expansion Interface Connector 2 .................................................. B-6
FPGA Banks 2 and 3 .................................................................... B-7
Expansion Interface Connector 3 .................................................. B-8
FPGA Banks 4 and 5 .................................................................... B-9
User IO ..................................................................................... B-10
Power ........................................................................................ B-11
Prototyping Area ........................................................................ B-12
INDEX
CONTENTS
viii Blackfin FPGA EZ-Extender Manual
Blackfin FPGA EZ-Extender Manual ix
PREFACE
Thank you for purchasing the Blackfin®Field-Programmable Gate Array
(FPGA) EZ-Extender®, Analog Devices, Inc. (ADI) extension board to
the EZ-KIT Lite®evaluation system for ADSP-BF533, ADSP-BF537,
and ADSP-BF561 Blackfin processors.
The Blackfin processors are embedded processors that support a Media
Instruction Set Computing (MISC) architecture. This architecture is the
natural merging of RISC, media functions, and digital signal processing
characteristics towards delivering signal processing performance in a
microprocessor-like environment.
The EZ-KIT Lite and FPGA EZ-Extender are designed to be used in con-
junction with the VisualDSP++®development environment.
VisualDSP++ offers a powerful programming tool with new flexibility that
significantly decreases the time required to port software code to a proces-
sor, reducing time-to-market.
To learn more about Analog Devices development software, go to
http://www.analog.com/processors/tools/.
Product Overview
The Blackfin FPGA EZ-Extender is a separately sold extension board that
plugs onto the expansion interface of the ADSP-BF533, ADSP-BF537, or
ADSP-BF561 EZ-KIT Lite evaluation system. The extension board aids
the design and prototyping phases of ADSP-BF533, ADSP-BF537, or
ADSP-BF561 processor targeted applications.
Product Overview
x Blackfin FPGA EZ-Extender Manual
The board extends the capabilities of the evaluation system by providing a
Xilinx FPGA with external memory, IDC connectors for off-board con-
nections, and a small bread board area.
The Blackfin FPGA EZ-Extender features:
• Xilinx Spartan III Field-Programmable Gate Array
DXC3S1000
DFG456 package
• Asynchronous static random access memory (SRAM)
DDirectly connected to FPGA
D2 MB (512K x 16 bits x 2 chips)
DTSOP44 package
• 25 MHz oscillator
DDirectly connected to global clock of FPGA
• Socket for auxiliary oscillator
DDirectly connected to global clock of FPGA
• IDC thru-hole connectors
DAllows quick access to Blackfin and FPGA pins for probing
DAllows access to Blackfin and FPGA pins for off-board
connections
• High-speed connector
DAllows access to Blackfin and FPGA pins for high-speed
application
• Expansion interface connectors
DAllows access to ADI’s family of Blackfin EZ-Extenders
Indice
Altri manuali Analog Devices Hardware per computer
Analog Devices
Analog Devices ADP1046A Manuale utente
Analog Devices
Analog Devices EVAL-ADF4152HVEB1Z Manuale utente
Analog Devices
Analog Devices ADDS-218X-ICE-2.5V Manuale utente
Analog Devices
Analog Devices LTC5597 Manuale utente
Analog Devices
Analog Devices Linear LTM 4700 Manuale utente
Analog Devices
Analog Devices AD9866 Manuale utente
Analog Devices
Analog Devices SHARC ADSP-214 Series Guida all'applicazione
Analog Devices
Analog Devices ADSP-21369 EZ-KIT Lite Manuale utente
Analog Devices
Analog Devices LTM4683 Manuale utente
Analog Devices
Analog Devices Blackfin Manuale utente
Analog Devices
Analog Devices ADAV4622 Manuale utente
Analog Devices
Analog Devices EVAL-AD7606SDZ Manuale utente
Analog Devices
Analog Devices Blackfin Audio EZ-Extender Manuale utente
Analog Devices
Analog Devices AD9883A Manuale utente
Analog Devices
Analog Devices Linear Technology LTC6953 Guida rapida alla configurazione
Analog Devices
Analog Devices EZ-KIT LITE ADSP-2191 Manuale utente
Analog Devices
Analog Devices Blackfin ADSP-BF537 Guida all'applicazione
Analog Devices
Analog Devices ADSP-SC573 EZ-KIT Manuale utente
Analog Devices
Analog Devices Linear SCP-LT8362-S-EVALZ Guida rapida alla configurazione
Analog Devices
Analog Devices Linear ADI Power LT1964 Guida rapida alla configurazione
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
