Angekis Saber Light Manuale utente
PLEASE REFER THIS DOCUMENT BEFORE USING.
FHD PTZ Camera
Saber Light
User Manual V(1.0) I EN
CONTENT
SAFETY GUIDES.................................................................................................
ACCESSORIES....................................................................................................
QUICK START.....................................................................................................
PRODUCT HIGHLIGHTS.....................................................................................
PRODUCT SPEC.................................................................................................
CAMERA INTERFACE.........................................................................................
CAMERA DIMENSION........................................................................................
IR REMOTE CONTROLLER..................................................................................
VISCA IN ( RS232 PORT ).................................................................................
VISCA PROTOCOL............................................................................................
PELCO-D PROTOCOL .....................................................................................
PELCO-P PROTOCOL ......................................................................................
OSD MENU......................................................................................................
IR TRANSFER (IR PASS)&UVC CONTROL.........................................................
1
SAFETY GUIDES
1.Before operaon, please fully read and follow all instrucons in the manual. For your safety, always keep this
manual with the camera.
2.The camera power input range is 100-240VAC(50-60Hz),ensure the power supply input within this rate before
powering on.
3.The camera power voltage is 12VDC, rated currency is 2A. We suggest you use it with the original power supply
adapter supplied by the factory.
4.Please keep the power cable, video cable and control cable in a safe place. Protect all cables especially the
connectors.
5.Operaonal environment: 0 -50 , humidity less than 90%.To avoid any danger, do not put anything inside the
camera, and keep away from the corrosive liquid.
6.Avoid stress, vibraon and damp during transportaon, storage and installaon.
7.Do not detect the camera housing and cover. For any service, please contact authorized technicians.
8.Video cable and control cable should be individually shielded, and cannot be substuted with other cables. Do not
direct the camera lens towards strong light, such as the sun or the intensive light.
9.Use a dry and so cloth to clean the camera housing. Applied with neutral cleaning agent when there is need to
clean. To avoid damage on the camera lens, never use strong or abrasive cleaning agents on the camera housing.
10.Do not move the camera by holding the camera head. To avoid mechanical trouble, do not rotate the camera head
by hand. NEVER MOVE THE CAMERA MANUALLY WHEN IT IS WORKING.
11. Put the camera on fixed and smooth desk or plaorm, avoid leaned installaon.
12. Power Supply Polarity (Drawing)
℃℃
2
DO NOT use hands for catching; or moving the camera barrel,
otherwise it may damage the camera mechanical structure
DO NOT use hands to quick rotate the camera barrel, otherwise it
maydamage the camera mechanical structure, even break the motor driving.
3
ACCESSORIES
Check all bellow items when open the package:
Camera······················································································
1 PCS
Power Adapter·············································································
1 PCS
Power Cable················································································1 PCS
RS232 Control Cable······································································ 1 PCS
USB3.0 Cable···············································································1 PCS
Remote Controller·········································································
1 PCS
User Manual··············································································· 1 PCS
Double-sided Adhesive···································································1 PCS
QUICK START
1. Check all cable connecons before power on.
4
PRODUCT HIGHLIGHTS
3 cables in 1 design: video, control & power and be transited via signal USB3.0 cable.
(Noce: to achieve stable power supply via USB3.0 cable, we suggest only use the 3m USB3.0 cable supplied by the factory, and
the PC’s USB 3.0 port can supply more than 5V 1000mA power;
We suggest you connect to the power adapter(supplied by the factory) if the camera is connecng to a USB2.0 port or USB 3.0
extender cable)
Smart and fashion design, ideal for cloud-based conferencing
Adopts advanced DSP, 1/2.8 inch 5MP image sensor, and high quality 5X 90 degree FOV opcal lens,provides
fluent and crystal image quality
Fast switching between different video formats: less than 1 second
5X Opcal Zoom + 2X Digital Zoom
Fast and accurate focus performance
Easy firmware upgrade-(field-upgradable)
USB 3.0 supper speed output, USB 2.0 compable
Effecve RS232/485 serial control
Up to 128 presets
Compable with the majority of video conferencing soware (UVC protocol standard)
With powerful funconal remote controller
IR transfer/IR pass funcon：except receiving the camera remote controller signal, the camera can also receive
other codes’ IR remote control signal, and pass these IR control signal to the codec’s IR receiver (via VISCA
port)
Mu-language OSD menu: English, Chinese
Dial Switch（ARM）
SW-1 SW-2 Instrucon
1 OFF OFF Updang mode
2 ON OFF Debugging mode
3 ON ON Working mode
Dial Switch（USB）
SW-5 SW-6 Instrucon
1 OFF OFF Updang mode
2 ON OFF Debugging mode
3 OFF ON Undefined
4 ON ON Undefined
2.DIP Switch Seng(at the boom of the camera):
·
·
·
·
·
·
·
·
·
·
·
·
·
·
5
SPEC
Video Format
USB3.0
1080P60/50/30/25, 720P60/50/30/25,
1024x576@30,960x540@30,640x360@30,352x288@30
USB2.0 1024x576@30,960x540@30,640x360@30,352x288@30
Video Port USB3.0, USB2.0
Sensor 1/2.8 inch high quality 5MP CMOS sensor
Lens F3.1～15.5mm(5X), F1.8 – 2.8, Field of view:90°(wide)-20°(tele)
Pan/lt Rotaon Pan: 170° ; Tilt: -30° ~ +90°, support up-side down installaon
Pan/lt Speed Pan: 0.1°~120°/s ; Tilt: 0°~80°/s
Preset: 10 via remote seng:; 128 via VISCA control; Preset ccuracy: 0.2°
Control Port RS232, RS485 (Serial VISCA, Pelco-P/D), USB3.0(UVC1.5), USB2.0(UVC1.1)
Minimum Lux 0.01lux
White Balance Auto/ Manual/Auto Tracking/OnePush/ Indoor/Outdoor/Sodium Lamp /Flurescent Lamp
Focus Auto / Manual
Iris Auto / Manual
Shuer Auto / Manual
WDR Supported
BLC Supported
2D Noise Reducon Supported
3D Noise Reducon Supported
Gamma Seng Supported
Mirror Image Supported
An Flicker OFF/ 50Hz/60Hz
Input Voltage 5V 1000Ma(USB3.0) / 12V DC 1A (Power adapter)
±
Dimension 220mm×190mm×173mm
Net Weight 1.25KG（2.8LBS）
PRODUCT
6
CAMERA INTERFACE
CAMERA DIMENSION
1.Camera Lens
2.Camera Base
3.IR Receiver Panel
4.Indicator Light
5.Dial Switch
6. Tripod Screw Hole
7. Installaon Hole
8. Power Indicator light(red)
9. 12V DC Power Input
10. RS232 (VISCA IN) Port
11.USB 3.0 Port
7
8
Indice
Altri manuali Angekis Telecamera di sicurezza
Angekis
Angekis Saber AT Manuale utente
Angekis
Angekis Blade Manuale utente
Angekis
Angekis Saber 20x Manuale utente
Angekis
Angekis Saber 4K NDI Manuale utente
Angekis
Angekis Saber IP20X Manuale utente
Angekis
Angekis Saber IP20X NDI Manuale utente
Angekis
Angekis Blade VS+ Manuale utente
Angekis
Angekis BLADE 4K Manuale utente
