Anker Nebula Capsule Max Manuale utente

User Manual

Nebula Capsule Max

Table of Contents

Safety Instructions 01

What’s Included 04

Overview 04

Getting Started 09

Nebula App 11

Settings 12

Using the Nebula Capsule Max 15

Specications 20

Troubleshooting 21

Notice 22

Trademarks 25

Warranty 25

Safety Instructions

Read all instructions before you use this device. Do not make any

changes or create settings that are not described in this manual. If

physical injury, loss of data, or damage is caused by failure to follow

instructions, the warranty does not apply.

Setup

• To reduce the risk of re and / or electric shock, do not expose the

device to rain or moisture. Objects lled with liquids, such as vases,

should not be placed on this device.

• Do not place this device on soft surfaces such as tablecloths or

carpets, otherwise the device could be a re hazard.

• Do not place this device in areas susceptible to excessive dust and

dirt or near any appliance generating a strong magnetic eld.

• To prevent overheating, do not block or clog the ventilation

openings.

• Never place this device in a conned space. Always leave enough

space around this device for ventilation.

• Avoid overexposing this device to direct sunlight, heat, large

temperature fluctuations, and moisture. Avoid extreme

temperatures. The suitable operation and storage temperature for

this device and its accessories is 41°F to 95°F / 5°C to 35°C .

• When this device is running for a long period of time, the surface

may become hot. If this occurs, shut it down immediately and

unplug the charger. Resume operation after the device has cooled

down.

• Always handle this device with care. Avoid touching the lens.

• Do not allow children to handle the device without supervision.

• No not place heavy or sharp objects on this device.

• To avoid electric shock, do not disassemble the device.

• Only use attachments or accessories specied by the manufacturer.

• Avoid extreme vibrations as they may damage the internal

components.

Power Supply

• Use only the provided power adapter.

• Power off the device before removing the power supply from the

socket.

• Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point where

they exit from this device.

• Unplug this device if there are lightning storms or when unused for

a long period of time.

• Where the power plug or an appliance coupler is used as the

disconnect device, the disconnect device shall remain readily

operable.

• Before you make or change any connections, ensure that all devices

are disconnected from the power outlet.

• Never touch the power cable or the power connector with wet

hands.

Hearing Safety

• To prevent hearing damage, do not listen for extended periods at

high volume. Set the volume to a safe level.

Charging

• The charger type is Q183 with output voltage / current of DC 9V/2A.

The charger should be installed near this product and should be

easily accessible.

• This charger is for indoor use only.

• When charging, place this device in an environment that has a

normal room temperature (ranges from 41°F to 77°F / 5°C to 25°C)

and good ventilation.

• Due to the enclosure material, this device must only be connected

to a USB 2.0 or higher.

Battery

• Do not replace the built-in battery yourself. Contact an authorized

service center to replace it.

• The remote control contains batteries which can be swallowed.

Keep the remote control out of the reach of children.

• Risk of explosion! Keep batteries away from heat, direct sunlight, or

re. Never dispose of batteries by burning.

• Remove the batteries when the remote control has not been used

for a long period of time.

• Replace the remote control batteries only with the same or an

equivalent type.

• Batteries contain chemical substances and they should be

disposed of properly.

• Charge this device regularly. Do not store this device with a

completely discharged battery.

Cleaning

• Use a soft, lint-free cloth. Never use liquid, gaseous, or easily

flammable cleansers to clean.

• Do not use any liquid cleaning agents to clean the lens to avoid

damaging the coating lm on the lens.

• Wipe the surfaces gently. Be careful that you do not scratch the

surface.

• Use lens cleaning paper to clean the lens.

Repairs

• Do not make any repairs to this device yourself. Only have your

device repaired by an authorized service center.

• Improper maintenance can result in injuries to persons or damage

to this device.

• Refer all servicing to qualied service personnel.

Caution

• Possibly hazardous optical radiation emitted from this device.

• Do not stare directly at the operating beam. The bright light may

damage your eyes.

What’s Included

Overview

1. Front View

Lens

Air ventilation (inlet)

2. Rear View

Air ventilation (outlet)

Infrared receiver

Power button

• Press and hold for 2 seconds to power on / off

• Press to wake up the projector / enter the standby mode in

projector mode

Speaker

DC-IN

• Connect to power supply (with supplied adapter)

USB port

• Connect to a USB flash drive

HDMI port

• Connect to a playback device via HDMI output

AUX-out socket

• Press to switch between Bluetooth speaker mode and

projector mode

• Bluetooth speaker power on / off

3. Top View

Volume up / down button

Conrmation button

Return button

Navigation buttons

4. Bottom View

Tripod socket

5. Remote Control

• Press to select an option:

shutdown, standby, reboot, or

enter Bluetooth speaker mode

• Press to enter / exit mouse key

mode

• Press to conrm a selection or

entry

• Pause / resume play

• Open the home menu

• Access more options during

play (available options depend

upon the source)

• Press and hold for 3 seconds to

engage autofocus

Navigation buttons

• Navigate menus or adjust the

selected content

• Return to the previous menu

• Volume up / down

6. LED Indication

Button LED Status Description

Solid blue Power on / Operating in projector

mode

Solid yellow Standby in projector mode

Solid red Charging

Solid green Fully charged

Flashing red Low battery

Flashing blue

Ready to pair / Bluetooth is pairing /

Bluetooth disconnected (Bluetooth

speaker mode)

Solid blue Bluetooth connected (Bluetooth

speaker mode)

Altri manuali per Nebula Capsule Max

Indice

Altri manuali Anker Proiettore

Anker

Anker Nebula Capsule 3 Laser Manuale utente

Anker

Anker NEBULA Vega Manuale utente

Anker

Anker Nebula Capsule Max Manuale utente

Anker

Anker Nebula Astro Manuale utente

Anker

Anker Nebula Cosmos Max Manuale utente

Anker

Anker NEBULA Vega Manuale utente

Anker

Anker Nebula Cosmos Max Manuale utente

Anker

Anker Nebula Cosmos Max Manuale utente

Anker

Anker Nebula Solar Manuale utente

Anker

Anker D2421 Manuale utente

Anker

Anker Nebula Mars 3 Manuale utente

Anker

Anker Nebula Apollo Manuale utente

Anker

Anker Nebula Prizm II Pro Manuale utente

Anker

Anker Nebula Capsule Max Manuale utente

Anker

Anker Nebula Mars II Pro Manuale utente

Anker

Anker NEBULA Capsule Pro Manuale utente

Anker

Anker D2121G11 Manuale utente

Anker

Anker Nebula Astro Manuale utente

Anker

Anker Nebula Mars II Pro Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente