Anztec QC-6601P Manuale utente

QC-6601P

Instruction Manual

Anztec Limited, 7C Birmingham Drive, Christchurch, New Zealand Phone +64 3 338 3139,

www.anztec.com email:sales@anztec.com

Software Ver.

Serial #

Key #

QC-6601P Rev 1.0 Page 2

While every effort has been made to ensure that the information contained in this literature is accurate, Anztec

reserves the right to amend the size and specifications of this machine in line with its policy of continuing

improvement and development

QC-6601P Rev 1.0 Page 3

Contents

Contents ................................................................................................................................... 3

Security..................................................................................................................................... 4

Warning .................................................................................................................................... 5

Configuration ........................................................................................................................... 5

Installation................................................................................................................................ 6

Initial Start Up ......................................................................................................................................6

Attendant Menu Management ................................................................................................ 7

Overview ..............................................................................................................................................7

Entering The Attendant Menu ..............................................................................................................7

Refills ...................................................................................................................................................8

Print Accountancy ................................................................................................................................9

Clear Short Term Meters ....................................................................................................................10

Event Log ...........................................................................................................................................10

Hopper Count .....................................................................................................................................11

Status ..................................................................................................................................................12

Web Interface ......................................................................................................................... 13

Accessing the Web Interface ..............................................................................................................13

Login screen .......................................................................................................................................14

Configuration......................................................................................................................................15

Configure Network.........................................................................................................................16

Configure Card Values ...................................................................................................................18

Configure Clock .............................................................................................................................19

Configure System ...........................................................................................................................20

Configure Site.................................................................................................................................21

Configure Pushover ........................................................................................................................22

Configure Reports ..........................................................................................................................22

Configure Receipt...........................................................................................................................23

Configure Ecommerce....................................................................................................................25

Configure Hardware .......................................................................................................................26

Meters.................................................................................................................................................27

Short Term Meters..........................................................................................................................27

Long Term Meters..........................................................................................................................27

Historical Turnover Meters ............................................................................................................27

Ecommerce Status ..............................................................................................................................29

Alerts ..................................................................................................................................................30

User ....................................................................................................................................................31

Password.............................................................................................................................................31

Installing Printer Paper ......................................................................................................... 32

Loading paper – Auto Load................................................................................................................32

Mounting Guide ..................................................................................................................... 33

Recommended Wall Cutout................................................................................................................34

QC-6601P Rev 1.0 Page 4

Security

As with any piece of payment equipment security is paramount to ensure the theft of tokens or credit

card details etc does not occur.

Once a machine or component is delivered to a distributor or end user it is their responsibility to ensure

that the machine or component is kept secure at all times.

Opening the secure cabinet to perform refills and routine maintenance may expose the machine to

security compromises. The distributor or end user must manage security issues using their own

documented security procedures.

Anztec accepts no responsibility for security compromises caused by lapses or deficiencies in

distributor or end user security procedures or controls.

While by no means a comprehensive list, the following are some suggested guidelines to help keep the

machine secure:

Track and Log

 Location of the machine.

 Who opened a machine, for what reason, and when.

 Components removed from machine for repair or replacement.

Inspection

 Check exterior of the machine regularly for tampering.

 Check for installations that are unsecured or substandard. This includes associated equipment

such as cables and network routers/modems.

 Look regularly for non standard items fitted to the exterior such as card skimming devices.

 Look regularly for non standard items fitted to the interior.

Monitor

 Have the machine within view of the attendant.

 Make sure the machine is in a well illuminated area.

 Use video surveillance to monitor the machine in unattended areas.

Personnel

 Ensure your employees are familiar with the operation of the machine.

 Check your employees are suitably qualified and authorized for any cash handling and

maintenance work that is required.

 Limit and monitor access to cabinet keys to reduce the chance of theft or tampering.

 Monitor third parties who access the machine for any reason.

The fitting of machine components not directly supplied by Anztec may result in security being

compromised. Anztec accepts no responsibility if this situation occurs.

QC-6601P Rev 1.0 Page 5

Warning

Configuration

The QC-6601P is configured to customer or distributor specifications prior to leaving Anztec’s

production facility.

Configuration includes items such as the designation of hoppers as coin or token, the value of those

coins or tokens, and additional bonus payout features. The Accountancy meters that are available are

also dependant on configuration.

If you require further information on the configuration of the equipment you have received please

contact your supplier.

Warning

Never remove, unplug, or replace any components inside this machine

without first turning off the mains power. Failure to comply may result in

damage to your machine and void your warranty.

QC-6601P Rev 1.0 Page 6

Installation

Initial Start Up

To prepare your QC-6601P for use, you need to:

1. Unpack the equipment supplied. Open the cabinet door and remove the 2 square head screws

that hold the machine to the pallet, these are located in the front right hand corner and rear left

hand corner of the base of the machine looking in from the rear. Use a magnetic screwdriver

to avoid dropping the screw and washer into the bottom of the machine.

2. After feeding the power cord through the cable entry in the base of the machine plug the cord

into the internal three pin socket on the power supply. Plug the other end into a standard mains

supply outlet. Use the P-clip supplied to strain relief the power cord.

3. Plug your network cable into the RJ45 network socket after feeding through the cable entry in

the base of the machine as above.

4. Switch the unit on using the Mains Switch on the Power Supply Front Panel

5. Fit printer paper if not pre-loaded. (See section later in this manual)

6. Reset the Long and Short term meters through the Configure System option in the

Configuration Menu accessed via the web interface. (See section later in this manual)

7. At the machine load tokens via the Refills option in the machine Attendant display menu. (See

section later in this manual)

QC-6601P Rev 1.0 Page 7

ATTENDANT MENU

A=Up B=Down

 1 : Refills

2 : Print Accy

ATTENDANT MENU

Press # to enter

attendant mode

Attendant Menu Management

Overview

Once you have installed the QC-6601P, you can enter the Attendant Menu to perform the following

functions when required:

 Access Event Log

 Print Accountancy

 Manage Refills

 Clear Short Term Meters

Entering The Attendant Menu

To enter the Attendant Menu on the QC-6601P, unlock and open the main door, and then press the #

key.

Once this is done the Attendant Menu will appear on the attendant LCD inside the machine.

Use the A and B buttons on the keypad scroll up and down through the Attendant Menu.

Press the number button on the keypad that corresponds to the Attendant Menu sub-menu you wish to

enter.

A list of the sub menus is as follows:

1. Refills

2. Print Accountancy

3. Clear Short Term Meters

4. Event Log

5. Hopper Count

0. Status

To exit the Attendant Menu close the main door.

QC-6601P Rev 1.0 Page 8

Hopper 1 - $X.XX

Enter value to add

$X.XX coins

#=ok *Cancel

Refill hopper

Hopper 1: $X.XX

Add xxx coins (X)

#=ok *Cancel

REFILLS-HOPPERS

1 : $X.XX

2 : $X.XX

Refills

To refill a Token hopper:

1. Insert your tokens or coins into the appropriate hopper while it is in situ, taking care to

ensure you know the number of inserted tokens.

2. Enter the Attendant Menu and using the A and B buttons scroll up and down through the

Attendant Menu until you see the Refills option, and then press button 1.

3. The Refills Hopper menu will appear.

4. Press Button 1.

5. Enter the number of tokens for the selected hopper and press #.

6. Press # to confirm or * to cancel.

7. Repeat steps 5 to 7 to refill the other hopper denominations.

8. To exit this menu and return to the Attendant Menu, press the * button.

QC-6601P Rev 1.0 Page 9

ACCOUNTANCY

1: Short Term Meters

2: Long Term Meters

3: User Defined

Print Accountancy

The QC-6601P has the ability to print meter information while in the Attendant Menu.

The following information will be printed:

 Current Hopper Levels

 Hopper Refills

 Purchases

 Hopper Payouts

 Totals

1. Press button 2 to enter Print Accountancy Menu.

2. Press button 1 to print Short Term Meters, 2 to print Long Term Meters or 3 to print User

Defined meters.

3. To exit this menu and return to the Attendant Menu, press the * button

QC-6601P Rev 1.0 Page 10

RAM CLEAR

Enter PIN

#= Clear *Cancel

Event Log

Event X

Event Y

Event Z

Clear Short Term Meters

The QC-6601P has Short Term Meters which you can clear while in the Attendant Menu.

1 Press button 7 to enter Clear Short Meters Menu.

2 Enter the PIN and press the # button clear the Short Term Meters.

3 To exit this menu and return to the Attendant Menu, press the * button.

Event Log

The QC-6601P has the ability to display recent events while in the Attendant Menu.

1. Press Button 4 while in the Attendant Menu to enter the Event Log.

2. Using the A and B buttons scroll up and down through the events to view.

3. To exit this menu and return to the Attendant Menu, press the * button

Indice

Altri manuali Anztec Terminale touch

Anztec

Anztec QC-6601Q Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente