–LED Array 1: Power Indicator (All Red)
a) ‘Tx’ light on: power supply indication and transmission power output 25mw
b) ‘200’ light on:: transmission power output 200mw
c) ‘600’ light on:: transmission power output 600mw
–LED Array 2: Band Indicator(All Blue)
a) ‘A/B/C/D/E’ light on: respectively indicate current band is set on BandA/B/C/D/E
–LED Array 3: Channel Indicator(All Green)
a) ‘1~8’ light on: respectively indicate current channel is set on Channel 1~8
.
–Button 4: Transmission Power Control
a) When turn on power, auto load last time channel/power settings but no
transmission, meanwhile ‘Tx’ light is on but stays low, user can change channel.
Short press button 4 twice to start transmitting.
b) Each time long press Button 4 (3s long) to change transmission power, ‘Tx’ light
solid on indicating output at 25mW, ‘200’ light solid on indicating output at 200mW,
‘600’ light solid on indicating output at 600mW.
c) Short press Button 4 twice to stop transmitting; ‘Tx’ light stays low.
–Button 5: Band/Channel Selection
a) Each time long press Button 5(3s long), band switch betweenA/B/C/D/E.
b) Each time short press Button 5, channel switch between CH1~8.
c) there is a blue LED nearby the microphone, Long press Button 5(5s long), light
on indicating the microphone turns on and light off indicating the microphone turns
off.
–Output Power Memory Function
a) First time turns on, default no transmission and ‘Tx’ light stays low.
b) Auto record transmission status when power off, next time power on, remain the
same transmission settings (on or off) as last time.
