Aopos T220III Manuale utente
AOPOS T220III
User’s Manual
THERMAL RECEIPT PRINTER
AOPOS SYSTEMS, S.A.
www.aopos.com
WARNING:
All rights reserved. No part of this publication may be reproduced,
stored in a retrieval, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without
the prior written permission of AOPOS SYSTEMS, S.A. The company
reverses the rights of modifications of manufacture technology,
assembly, software and hardware without notice. Contact your
franchiser if you need further information about the product.
AOPOS SYSTEMS, S.A.
www.aopos.com
Contents
1.1) Main Features .......................................................................2
1.2) Function List ..............................................3AOPOS T220III
2. Quick Start
2.1) Unpacking & Parts Identification ..........................................4
2.2) Loading the Paper Roll ........................................................5
3. Printer Interface and Connection
3.1) Connecting the Interface Cable.................................................8
3.2) Connecting to a Cash Drawer ..................................................8
3.3) Connecting the AC Adapter ......................................................9
4. Configuration
4.1) Panel LED Indicators ...............................................................10
4.2) DIP Switch Settings ..................................................................11
4.3) Printer Self Test ........................................................................12
4.4) Driver Installation ......................................................................13
5. Safety and Maintenance
5.1) Safety Information ................................................................14
5.2) Periodical Cleaning ..............................................................14
5.3) Preventing Paper Jams ........................................................14
5.4) Fixing Paper Jam ..................................................................15
6. Appendix
- Products Specifications ..............................................................16
- Configuration ..............................................................................19
7. General Printer Commands
...................................................24
1. General Information
-1-
1. General Information
1.1) Main Features
1. High speed printing:
220mm/s maximum print speed.
Low-noise thermal printing.
High reliability due to a stable mechanism.
2.Application Software:
Command protocol is based on ESC/POS standard.
Various Layouts are possible by using page mode.
Characters can be scaled up to 64 times as large as the standard size.
Smoothing is also possible.
Repeated operation and copy printing are possible by using macro
definitions.
Character font size (12x24 font or 9x17 font) can be selected using a
command.
-2-
3. Printer Handling:
Easy paper-roll installation.
Equipped with an auto cutter.
The printer allows easy maintenance for tasks such as head cleaning.
Two different print densities can be selected by DIP switches.
The built-in interface provides control capability for one cash drawer.
1.2) Function ListAOPOS T220III
1. Maximum printing speed 220mm/sec (576 dots)
2. Fully-compatible with EPSON ESC/POS command ( see AOPOS T220III
command sets for programming reference)
3. Characters can be scaled up to 8 times larger than standard size(*)
4. Support print data in page mode
6. Support Font A (12*24) and Font B (9*17) characters(*)
7. Support NV Image download
8. Three indicator LEDs (POWER,ERROR, and Paper roll out) and One panel
button (FEED)
9. Support warning beep sound
10. Support DIP switch to select Chinese/ASCII mode
11. Support printer server printing
12. Support 9600,19200,38400,115200bps baud rate
13. Support print with 90 rotation(*)
Note:
(*) items are functions that will affect printing speed
-3-
S789008
S 8 9 0 0 80
High-speed Printing Printer Identification
Multiple Connection Printing OPOS Driver Various Character Sets
OP O S
Barcode
2. Quick Start
2.1) Unpacking & Parts Identification
a. Unpacking:
b. Parts Identification:
AOPOS T220III
-4-
2.2) Loading the Paper Roll
a. Make sure that the paper roll matches the printer specification. Do not use paper
rolls that have the paper glued to the core because the printer cannot detect the
paper end correctly.
Important: The printing quality and lifespan of the thermal head cannot be guaranteed if
any paper other than that recommended is used. Thus, the warranty will be
void automatically if any fault occurs due to the use of wrong paper rolls.
Recommended Paper Rolls
b. Open the paper roll cover pressing the cover-open button
Important: Donot pull the cover open lever and open the printer cover during printing
is in process.
-5-
c. While oberserving the direction of the roll, set the paper roll into the hollow, and pull
on the leading edge of the paper toward you as shown:
d. Close the cover. When closing the cover, press the center of the printer cover
firmly to prevent paper miss-loading
-6-
e. Tear off the paper outside the cover as shown
-7-
3. Printer Interface and Connection
3.1) Connecting the Interface Cable
a. Before connecting/disconnecting the interface cable, make sure that power to the
printer and all the devices connected to the printer is turned on
b. Connect the interface cable to the connector on the rear panel of the printer
c. In the case of a serial interface, tighten the connector screws. In the case of a parallel
interface, fasten the connector clasps
3.2) Connecting to a Cash Drawer
Important:
Make sure that the printer is turned off and unplugged from the AC outlet and
that the computer is turned off before making connections.
Do not connect a telephone line into the peripheral drive connectors. Failure to
observe this may result in damage to the printer.
-8-
3.3) Connecting the AC Adapter
a. Connect the AC power cord to the inlet of AC adapter, and then connect the power
cord plug to a suitable electrical outlet
b. Connect the adapter cable to power connector of printer, make sure the printer
power switch is OFF before making any connections
c. Set the power switch as shown. The POWER lamp on the control panle will light
up.
-9-
4. Configuration
Printer Control Panel & Status Indicator
4.1) Panel LED Indicators
1. Power ( POWER) LED: Green
On: Power is stable
Off: Power is not stable
2. Error( ERROR) LED: Red
On: Off line (except during paper
feeding using the FEED button and
test printing, and the error state.)
Off: Normal condition
3. Paper roll end (PAPER OUT) LED: Red
On: The paper roll near end is detected.
Off: Paper is loaded (Normal condition).
-10-
4.2) DIP Switch Settings
The DIP switch panel is locating at bottom of the printer as shown:
DIP Switch Functions:
Note: Before configure the DIP switch settings, please first turn the printer
power off and remove the paper roll.
(*) Baud Rate is only available for serial interface models.
POW E R
OU T
ER ROR
FEED
PAPER
4.3) Printer Self Test
This is to test whether the printer is working properly or not and also checks the printing
quality, firmware version, and DIP switch settings.
1. Hold the FEED button first and then turn on the power at the same time, release the
button after around 1 second.
2. If the printer is working properly, it should then automatically print the self-testing
result that indicating the firmware version number, printer connection type, English
alphanumeric characters, and so on.
3. The test print will be ended with following message:
Note: Above procedure does not test parallel or serial ports. Please use communication
utility to test the printer connection.
-13-
4.4) Driver Installation
-14- -15-
-16- -17-
Indice
Altri manuali Aopos Stampante
