AIC1532
6 AIC1532U Rev A
NORMAL OPERATING RANGE
DC CHARACTERISTICS
Parameter Symbol Min Typ Max Units
High voltage supply VPP 30 190 230 V
Logic supply voltage VDD 4.5 5.0 5.5 V
Slew rate of VPP 1
1. During a data latch sequence VPP must be stable.
100 V/ms
High level input voltage VINH 2.0 VDD V
Low level input voltage VINL 0 0.8 V
Input voltage OCI On VOCIE 2.5 VDD V
Input voltage OCI Off VOCIA 0 2.0 V
Operating junction temperature TJ0 125 °C
Operating temperature TAMB 0 70 °C
Parameter Symbol Test Conditions Min Typ Max Units
Quiescent supply current of the push-
pull outputs IPPQ
VIN = 0.1 V at HI, DATA,
CLK, LE; VIN = VDD-0.5 V at
LO, Z
0.15 0.60 mA
Supply current of the push-pull out-
puts by D01 – D32 = Low IPP,ON
VIN = 0.1 V at LO, DATA,
CLK, LE; VIN = VDD-0.5 V at
HI, Z
0.50 1.00 mA
Quiescent supply current
of the logic IDDQ
VIN = 0.1 V at DATA, CLK,
LE; VIN = VDD-0.5 V at HI,
LO, Z
0.15 0.30 mA
Supply current of the logic IDD
fCLK = 2 MHz;
fData = 1 MHz 0.50 5.00 mA
High level input current at HI, LO, Z -IIN,H VIN,H = VDD-0.5 V 30 µA
Low level input current at HI, LO, Z -IIN,L VIN,L = 0.1 V 200 µA
High level input current at DATA,
CLOCK, LE IIN,H VIN,H = VDD-0.5 V 100 µA
Low level input current at DATA,
CLOCK, LE IIN,L VIN,L = 0.1V 10 µA
High level input current at OCI IOCI,H VOCI,H = VDD-0.5 V 30 µA
Low level input current at OCI IOCI,L VOCI,L = 0.1 V 10 µA
Low level output for OUT, OCM VOUT,L IOUT = 100 µA 0.5 V
High level output for OUT, OCM VOUT,H -IOUT = 100 µA VDD-1 V
Low level output for OC, UV VO,L ID = 5mA, VDD = 2.9 V 1 V
Switching level of the over current
detection at VPP IVPPU
Measured to toggle at
High on OCM;
VOCI = 0.1 V
2 5 mA
