Arbor Technology Acorn Manuale
01945 410950 support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Generic build instructions –Workbench Acorn/Super heavy-duty/Rotem
Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarize yourself with the assembly process and to also check that
you have the correct components. If for any reason you need assistance, you can find our
contact details on the top of page of these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible
and that you use another person to assist you if necessary.
You can check our YouTube channel for assembly video.
Please click here
Package contents
1x Tabletop
1x Base shelf (for double shelve version 2x)
1x Back panel (for versions with back panel)
2x Sets of legs
2x Back braces
2x Side braces
Tools required
Electric screwdriver (No.2 Pozi bit) or
Screwdriver
01945 410950 support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 1
Step 2
Step 3
Step 4
Lay the top upside down.
Place the legs in position as shown ensure
that the legs are pushed into the corner.
After making sure that the legs are pushed
in the corners secure it with the provided
screws just as shown in the picture.
Ensure the brace is pushed flush with
tabletop and leg frame and secure into
place.
01945 410950 support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 5
Step 6
Step 7
Step 8
Rotate the workbench and prepare to slide in the
shelfs.
Fit the bottom shelf in position. Centralize and
secure using the screws supplied.
Step 1
Step 2
Repeat this step if you have ordered double shelf
option.
Add side braces, ensure the brace is pushed into the
top corner and is lined up with the front of the leg
and secure into place.
01945 410950 support@arborgardensolutions.co.uk
http://www.arborgardensolutions.co.uk
Trading address: Unit 11, Cattle Dyke, Wisbech, England, PE1 34NR
Step 9
Step 10
If you order version with back panel. Lift the back
section into place. Ideally this will need to be held in
place by a second person. Secure the back using the
screws supplied.
Secure the back panel via pre-drilled pilot holes
with the 85mm screws just as shown in the picture.
Your workbench is now completed!
We hope that you found your product quick and easy to assemble but if not and you require further
assistance or have any questions you can contact us via details above.
Also, you can check our YouTube channel for assemble videos, click on the link below:
https://youtu.be/y3RjtQm9LE8
Or
Type in YouTube search box Arbor Garden Solutions.
Questo manuale è adatto per i seguenti modelli
21
Indice
Altri manuali Arbor Technology Deposito attrezzi
Arbor Technology
Arbor Technology Nanofex Craftsman/Jewellers Workbench Manuale utente
Arbor Technology
Arbor Technology Hollies Manuale
Arbor Technology
Arbor Technology 01945 410950 Manuale utente
Arbor Technology
Arbor Technology TREATED-3FT-WBP-WW-DS Manuale
Arbor Technology
Arbor Technology Artifex Craftsman/Jewellers Workbench Manuale utente
