Argox G Series Manuale utente

Argox website: http://www.argox.com

G Series Industrial Barcode Printer

User’s Manual

Table of Contents

1. Checking Your Box 5

Unpacking 5

Connecting the Power Cord 7

Parts and Features 9

Loading Ribbon 12

Loading Media 16

Standard Mode 16

Peel Off Mode 20

Cutter Mode 24

Adjust Position of Label Sensor 27

2. Printer Operation 28

Front Panel 28

LED Indicators 29

Buttons 30

LCD Display 32

Changing Settings from the Panel 33

Setting Display Language 37

Rear Panel 38

DIP switch 39

Media Calibration 40

Printing a Configuration Report 41

Resetting to Factory Default Settings 42

3. Computer Connections 43

Connecting the Printer 43

Communicating with the Printer 44

Installing a Printer Driver 45

4. Troubleshooting 52

LED and LCD Diagnosis 52

III

Media Problems 52

Ribbon Problems 53

Other Problems 53

Printer Status 55

Transmission Problems 56

Recovery 56

Printer Maintenance 57

Cleaning the Print Head 58

Cleaning Interval 58

Cleaning Material 58

Cleaning Direction 59

Cleaning the Roller 59

Cleaning the Media Compartment 59

5. Technical Reference 60

General Specifications 60

Fonts, Bar Codes and Graphics Specification 63

Printer Programming Language A, PPLA 63

Interface Specifications 64

Serial Interface 64

Connection with Host 65

Parallel (Centronics) 67

Auto Polling 67

ASCII TABLE 68

6. Accessory 69

Cutter Installation 69

Dispenser & Rewinder Installation 74

Proprietary Statement

This manual contains proprietary information of Argox Information

Co., Ltd. It is intended solely for the information and use of parties

operating and maintaining the equipment described herein. Such

proprietary information may not be used, reproduced, or disclosed

to any other parties for any other purpose without the expressed

written permission of Argox Information Co., Ltd.

CAUTION:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to

operate the equipment.

1. Checking Your Box

Unpacking

After receiving your printer, please check for possible shipping

damage:

1. Inspect the outside of both the box and the printer for

possible damage.

2. Open the top cover of the printer to see if the media

compartments are in order.

Note: If damage has occurred, contact your shipping company

immediately to file a claim.

3. Check whether you have received the following

accessories together with the printer. If there are any

items missing, please contact your local dealer.

Package Contents

Printer

Power Cord

Quick Guide

CD Rom (including software and

user’s manuals)

Core for Ribbon

USB to Centronics

Cable

Connecting the Power Cord

Before setting up and connecting the printer you should consider

the following.

WARNING! Do not operate the printer in an area where it might

get wet.

Find a solid flat surface with adequate room for the printer

and enough space above for media and ribbon access.

Place the printer within cable distance of the host and

printer (serial or parallel cable.)

Isolate the power cord from other electrical cables.

Connect the power cord as below.

1. Leave the power switch at the ”O” position.

2. Connect AC Power Connector to printer’s power jack and

the other end to AC Electrical Outlet.

Power Switch

AC Power

Connector

Power Jack

AC Electrical Outlet

Parts and Features

Top Access Door

LCD Display

Front Access Door

Ribbon Pick-up Spindle

Ribbon Supply Spindle

Media Supply Spindle

Feed Slot

Thermal Print Head

Bracket

Head Latch

Paper Sensor Guide

Platen Roller

Thermal Print Head

Indice

Altri manuali Argox Lettore di codici a barre

Argox

Argox AS-8000 Series Manuale utente

Argox

Argox OS Series Manuale utente

Argox

Argox AS-9600 Manuale utente

Argox

Argox P4 Series Manuale utente

Argox

Argox Xellent X-3200ZE Manuale utente

Argox

Argox ArgoxScan 9500 Manuale utente

Argox

Argox AS-8000 Series Manuale utente

Argox

Argox AR-3201 Manuale utente

Argox

Argox AS-9300 Manuale utente

Argox

Argox D2 Series Manuale utente

Argox

Argox OS-214 plus Manuale utente

Argox

Argox AI-6821 Manuale utente

Argox

Argox OS-314plus Manuale utente

Argox

Argox Smart CP-2140 Manuale utente

Argox

Argox P4 Series Manuale utente

Argox

Argox AS-8510 Manuale utente

Argox

Argox AS-8020 Manuale utente

Argox

Argox AS-8000 Series Manuale utente

Argox

Argox amigo series Manuale utente

Argox

Argox AS-8110 Manuale utente

Argox

Argox Smart CP-2140 Manuale utente

Argox

Argox AP-9800 Manuale utente

Argox

Argox Xellent X-1000VL Manuale utente

Argox

Argox AS-9500 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente