ARMBRUSTER ENGINEERING ELAM SYSTEM Manuale
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted. 1
Hardware installation
Armbruster Engineering GmbH & Co. KG
www.armbruster.de
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted.
Version history
Date Version Chapter
Changes
Author
28.03.2022 1.0
Document
created according to the specifications
T. Siebert
09.08.2022 1.1
Layout was
revised
T. Siebert
02.02.2023 1.2
Proof
reading and revision for software version 1.2.0-r
R. Thiel
2
Great care has been taken in the compilation of illustrations and text, but there may still be mistakes in the document. Please note that Armbruster Engineering GmbH & Co.KG cannot accept
any liability for this. We are very grateful for any suggestion for improvement!
Table of contents
1. Scope of delivery base 3
1.1 Optional hardware group 1 4
1.2 Optional hardware group 2 5
1.3 Optional hardware group 3 6
2. Installation of the SWA 7
2.1 Assembly of the SWA with the quick device mount 8
2.2 Power supply 9
2.3 Further connections of the SWA 10
2.4 Assignment of inputs and outputs 12
2.4.1 Assignment of the inputs 13
2.4.2 Assignment of the outputs 14
2.5 Key reader internal and external 15
3. System start 16
4. Shortscuts and definitions 17
Contact 18
This quickstep is released for the software version 1.2.0-r
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted. 3
Thank you for purchasing an ELAM START system.
Please first check the completeness of the scope of delivery.
For each item you will find our unique STAMA No. and the Quickstep (QS), which describes the installation,
setup and assembly. Some basic devices are already described in this Quickstep, more complex devices,
such as the scanner, are described separately in their own Quickstep.
3 x SWA Ident Keys
STAMA-Nr.: 3095
QS –Hardware installation
1x SWA Server
STAMA-Nr.: 3287
QS - Hardware installation
1. Scope of delivery base
1x SWA Power supply
STAMA-Nr.: 5520
QS –Hardware installation 1x Touch monitor 23“ with connection cables
STAMA-Nr.: 3158
QS –Hardware installation
1x Hand scanner
STAMA-Nr.: 3450
QS - Scanner
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted. 4
SWA-Electrical cabinet
STAMA-Nr.: 3574 / 3575
QS –Hardware installation
USB-Hub
STAMA-Nr.: 3576
QS –Hardware installation
SWA Keys
STAMA-Nr.: 3095
QS –Hardware installation
Key reader external
STAMA-Nr.: 3410
QS –Hardware installation
Sensor distributor
STAMA-Nr.: 3586
QS –Sensor distributor
Screw driver adapter
STAMA-Nr.: 3890
QS –Kolver-Screw driver
Kolver-Screw driver
STAMA-Nr.: 3860/3861/3865
QS –Kolver-Screw driver
Network switch
STAMA-Nr.: 3635
QS –Hardware installation
Docu-Camera
STAMA-Nr.: 3038
QS –Docu-Camera
WIFI-Accesspoint
STAMA-Nr.: 3578
QS –Hardware installation
Quick change mount
STAMA-Nr.: 3180
QS –Hardware installation
1.1 Optional hardware group 1
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted.
Kolver K-Ducer
STAMA-Nr.: 3867
QS –Kolver K-Ducer
HS-T
NutBee/RivBee/TorqBee
STAMA-Nr.:
3840/3841/3842
QS –Screw HS-T
Handlingarm
STAMA-Nr.: 3864
QS - Sensorbox
Sensorbox
STAMA-Nr.: 3850
QS –Sensorbox
Kolver-Handlingarm
STAMA-Nr.: 3868
QS –Sensorbox
AmbosIO
STAMA-Nr.: 3693
QS –AmbosIO
Labelprinter with ethernet
STAMA-Nr.: 3460
QS –Labelprinter
Ethernet Bitcube
STAMA-Nr.: 3562
QS –Bitcube
Measuring probe
STAMA-Nr.: 3870
QS –Sensorbox
5
Pick to Light-Sets
STAMA-Nr.: 3648/3649
QS –Pick to Light
1.2 Optional hardware group 2
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted. 6
Burster Digiforce
STAMA-Nr.: 3886
QS –Burster Digiforce
Scale
STAMA-Nr.: 3882
QS –Scale
CoBot
STAMA-Nr.: 3524/3525/3526
QS –CoBot
Camera
STAMA-Nr.: 3035
QS –Docu-Camera
Caliper
STAMA-Nr.: 3871 bis 3875
QS –Caliper
1.3 Optional hardware group 3
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted. 7
M4 thread
The SWA is delivered with an adapter plate on the back of the device. With this adapter plate you have the
possibility to attach a mount with VESA standard (75/100, M4 thread) to integrate the SWA in your
workstation.
If you have decided to use our quick-change device (STAMA no.: 3180), please follow the instructions on
the following page.
2. Installation of the SWA
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted. 8
Mount the head section on the
adapter plate of the SWA.
Insert the monitor holder into
the wall bracket and fix it with
the adjusting screw.
Slide the SWA with head section
over the monitor holder until it
clicks into place.
Flip the safety clip forward to fix
the SWA in place.
2.1 Assembly of the SWA with the quick device mount
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted.
This picture shows the polarity of
the plug.
9
+--+
Plug assignment
Connect the power supply unit with the
socket of the SWA. Fix the plug with the help of the two
screws.
2.2 Power supply
ELAM SYSTEM
Quicksteps –Hardware installation
Confidential. All rights reserved. Dissemination or reproduction without the written permission of Armbruster Engineering is not permitted. 10
Connect the scanner to one of
the USB 2.0 ports of the SWA.
More information is available in
the Quickstep:
„0.6-QS_Scanner“
Additional devices can be connected to the SWA using a USB
hub (STAMA no. 3576).
2.3 Further connections of the SWA
Touch-Function:
Connect the USB cable to a
USB-A 3.0 port of the SWA and
the USB-B 3.0 connector of the
monitor.
Indice
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
