Artusi CAGH6000B Manuale utente
MODELS: CAGH6000B
CAGH7000B
CAGH9000B
Built-in Stainless Steel Gas Hob
Installation and User manual
Contents
Safety ---------------------------------------------------- 1
Product description---------------------------------- 4
Installation------------------------------------------------6
Start using your appliance--------------------------11
Maintenance and troubleshooting----------------13
Warranty------------------------------------------------ 14
1
This manual explains the proper installation and use of your appliance, please read it
carefully before using even if you are familiar with the product. The manual should be kept
in a safe place for future reference. In case of failure, only the Authorized Technical
Service may repair this hob. Otherwise the guarantee will be null and void.
Warning
General Safety
The appliance may only be installed and connected by licensed gasfitters / authorized
persons.
Built-in appliances may only be used after they have been built in to suitable cabinets and
work surfaces that meet local authority standards.
Repairs to the appliance must only be carried out by trained registered authorized service
persons / engineers.
Consult the reference data label before making the electrical connections. It is located on
the underside of the appliance.
The electrical connections must be made by specialist installers to the local legal and
regulatory requirements.
If the cable is damaged in any way it must be replaced by the manufacturer or after sale
service or by authorized technical staff.
NEVER USE OR STORE FLAMMABLE MATERIALS IN THE APPLIANCE STORAGE
DRAWER OR NEAR THIS APPLIANCE.
NEVER SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN
OPERATION.
ALTERATION OR MODIFICATION OF THIS APPLIANCE IS FORBIDDEN.
USE OF THIS APPLIANCE AS A SPACE HEATER IS VERY DANGEROUS AND MAY
RESULT IN INJURY OR DEATH.
Correct Use
People including children, who, because of their physical, sensory or mental capabilities
or their inexperience or ignorance are not able to use the device safely, should not use
this device without supervision or instruction by a responsible person.
Only use this appliance for normal domestic cooking and frying of food. It is not for
commercial use.
The appliance must not be used as a work surface or as a storage surface.
Additions or modifications to the appliance are not permitted.
Do not place or store flammable liquids, highly inflammable materials or fusible objects
2
(e.g. plastic film, plastic, aluminum) on or near the appliance.
Never heat empty pans on the appliance.
Children’s Safety
The cooking zones will become hot when you cook. Always keep small children away
from the appliance.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young children must supervised to ensure that they do not play with the appliance.
Safety During Use
There is the risk of burns from the appliance if used carelessly.
Keep all cables away from the appliance and hot cookware
Warning! Fire Hazard! Overheated fats and oils can ignite very quickly. Never leave oil
heating unattended.
Risk of burns! Do not place objects made of metal, such as knives, forks, spoons and
saucepan lids on the surface, as they can get hot.
Unsuitable for use in a marine environment
The appliance can be used in freezing conditions.
Safety Instructions
Safety When Installed
This hotplate must be installed in accordance with:
AS 5601 - Gas Installations (for Australia) – current edition
NZS 5261 – Code of Practice for the Installation of Gas Burning Appliances and
Equipment (for New Zealand) This standard may not be current.
Local gas fitting regulations
AS/NZS 3000 – Electrical Installations (Wiring Rules)
Building codes
Any other relevant statutory regulations.
Check the gas type label on the underside of the hotplate, adjacent to the gas connection
3
to ensure it corresponds to the installation gas supply. If in doubt contact the supply
authority.
The power supply cord (supplied) must not touch any hot surfaces and must be placed so
that its temperature does not exceed 75 degrees at any point along its length.
Check for leaks using soapy solution, never a naked flame, after connecting to gas.
Where a flexible hose assembly is used, ensure it is approved to AS/NZS 1869, Class B
10mm diameter and no more than 1.0metre in length. Any hose assembly used must be
restrained from accidental contact with the flue outlet of an under bench oven.
How To Avoid Damage To The Appliance
Do not use the cooking zones with empty cookware or without cookware.
The ventilation gap of 5mm between the worktop and front of the unit underneath must not
be covered.
ALTERATION or MODIFCATION OF THIS APPLIANCE VOIDS THE WARRANTY.
Safety When Cleaning
Switch off the cooled appliance before cleaning.
For safety reasons, the cleaning of the appliance with steam jet or high pressure cleaning
equipment is not permitted.
Disposing Of The Device
Take it to an electrical and electronic waste recycling and reuse centre. A label
has been put on the device, its instructions manual, or the package. The device
has been manufactured of recyclable material.
Ask your local environmental care authority for information on location of such
facilities.
4
Product Description
No Model Burner* FFD Pan
supports
Knob
position
Total gas
consumption
Over view
1
CAGH6000B
1W+2SR+1A With Cast Iron Front LPG:
29.6MJ/h
NG:
29.0MJ/h
2
CAGH7000B
1W+1R +2SR+1A With Cast Iron Front LPG:
39.6MJ/h
NG:
39.0MJ/h
3
CAGH9000B
1W+1R +2SR+1A With Cast Iron Front LPG:
39.6MJ/h
NG:
39.0MJ/h
*Note:
For burner: W=Triple Ring Wok burner, R=Rapid burner, SR=Semi-Rapid burner, A=Auxiliary
burner
Pan support
Panel
knobs
Burner
5
Accessory
Name
Picture
( for reference only, physical unit maybe different)
Quantity
User Manual 1
Sealing tape 1 roll
Additional
labels
You have an additional rating label in accessory bag, attach
it to a surface where it can be easily read e.g. inside surface
of adjacent cupboard
1 set
Installation
clip
4 sets
Screws
ST4.2x24
4 pcs
LPG Injectors
4 pcs
Elbow &
Washers
1 Elbow, 3 washers
Natural gas
regulator
1
Technical Specifications
Model
Product
Dimensions
(h x w x d) mm
Cut-out
Size
( w x d)mm
Electrical
Connection
Rated
Input
Power
CAGH6000B 584x510x100 552 x 470 220-240V/50Hz 0.5W
CAGH7000B 684x510x100 552 x 470 220-240V/50Hz 0.5W
CAGH9000B 874x510x100 552 x 470 220-240V/50Hz 0.5W
827 x 475
6
Installation
Before Installation:
Before cutting into any bench tops, ensure the minimum clearances to walls, adjacent surfaces and
overhead surfaces required by the relevant gas appliance installation code (see above) will comply.
Dimensions are specified in millimeters (mm)
Overhead cupboards and range hood = 650 mm.
Side and rear clearance = 200 mm to any burner edge.
Overhead exhaust/ceiling fan = 750 mm
Horizontal surfaces adjacent the hob = less than or equal to the hob height.
Ensure there is sufficient clearance to fit the regulator and/or flexible hose connection with the hotplate in
the installed position.
Before the appliance is installed into the cabinet, please make sure any transit protection materials are
removed.
NOTE: This appliance is a built in appliance, the immediate surrounds of the appliance material must be
non-combustible materials or combustible material with heat resistance value higher than 90℃.
When you have installed the hob, make sure that
The GPO (general purpose outlet) must always be in an accessible position.
The supply connection point, test point and natural gas regulator adjustment screw (for Natural gas
installation) are accessible for testing and/or adjustment with the hotplate in the installed position.
TO BE INSTALLED ONLY BY AN AUTHORIZED PERSON.
7
1. Cupboard Cutting
Bench top thickness, 30– 40 mm (3 – 4 cm).
mm
mm
CAGH6000B CAGH7000B
mm
CAGH9000B
2. Place Burner Box
Apply the adhesive sealing tape to the underside lip of the burner box. Shown at G opposite.
Place burner box into cutout hole and fit clamping brackets to clamp the hotplate to the bench.
3. Fit Burners And Trivet.
Replace burners and ensure they are correctly repositioned over the ignitor (S) and thermocouple (T). The ignitor
(S) must be clean for trouble free sparking. Test burner ignition and burner flame for correct operation, If burner
is placed correctly it will not rotate on its supports..
8
The Triple Ring (Wok) burner (diagrams below) does not fit over the igniter or thermocouple but must be placed
on its supports. Make sure trivet is fitted onto its locator on burners and can’t rotate after assembled.
3. Electrical Connection
Install a 10 amp general purpose outlet (GPO) in accordance with relevant electrical standards and/or codes of
practice applicable.
The power supply cord (supplied) must not touch against any hot surfaces and must be placed so that its
temperature does not exceed 75℃ at any point along its length.
After having installed the hotplate, the GPO must always be in an accessible position.
Wiring diagram
CAGH6000B CAGH7000B, CAGH9000B
4. Gas Connection
Install in accordance with relevant gas standards and/or codes of practice applicable.
Connect the elbow fitting to the appliance gas manifold connection, and check that seals between the elbow and
manifold connection are in place and in good condition.
For Natural gas: connect the natural gas appliance regulator (pictured opposite) with integral test point using
approved gas thread tape or compound to the elbow fitting.
For Universal LPG: see “SETTING THE GAS PRESSURE”
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Artusi Piano cottura
Artusi
Artusi AGH41B Manuale utente
Artusi
Artusi AFE547W Manuale utente
Artusi
Artusi ECT600C4 Manuale utente
Artusi
Artusi CAID604K Manuale utente
Artusi
Artusi CACC90 Manuale utente
Artusi
Artusi CAGH75X Manuale utente
Artusi
Artusi CAGH1 Guida
Artusi
Artusi CACC60 Scheda tecnica
Artusi
Artusi AFDE5470W Manuale utente
Artusi
Artusi CBO560SS Manuale utente
