Assa Abloy Yale 8800-ITS Guida rapida

Handing the Latchbolt

1. Insert flat blade screwdriver into cover slot.

2. Pull back on screwdriver until latchbolt

extends past base front and rotate the head

to the desired position.

Handing the Hubs

1. Locate RED MARK on locking piece.

2. Push toggle button slide away from "square

spindle hole".

3. With blade screw driver push RED MARK on

slide nearest "square spindle hole".

4. RED MARK indicates

locked side!

8800-ITS Mortise Lockset

Wiring Diagram and Installation Instructions

Attention Installer

If installation instructions are not followed this may result in

damage to the lock and void the factory warranty. Removing

cover screws voids lock body warranty.

Any retrofit or other field modification to a fire rated opening can

potentially impact the fire rating of the opening, and Yale Locks &

Hardware makes no representations or warranties concerning

what such impact may be in any specific situation. When

retrofitting any portion of an existing fire rated opening, or

specifying and installing a new fire-rated opening, please consult

with a code specialist or local code official (Authority Having

Jurisdiction) to ensure compliance with all applicable codes and

ratings.

An ASSA ABLOY Group brand

80-9086-0054-010 (07-14)

An ASSA ABLOY Group brand

80-9086-0054-010 (07-14)

Step 3. Remove Inner Shell from Outer

Shell by gently pressing the

Inner Shell upwards from the

bottom. Use caution not to

damage sensor wires.

Step 1. Remove Cylinder Monitor

Assembly from Lockbody by

gently pushing up through the

opposite side of cylinder hole.

Step 2. Remove spring from assembly.

Use caution not to stretch or

otherwise deform the spring.

Step 4. Turn Inner Shell on side. Align

the inner shell with the diagonal

slot in the Outer Shell. Slide the

Inner Shell through the Outer

Shell.

Spring

Reed Switch

Inner Shell

Outer Shell

Inner Shell goes

through here.

An ASSA ABLOY Group brand

80-9086-0054-010 (07-14)

Step 5. Feed Inner Shell (with wire and

sensor) back through the

Cylinder hole in the lockbody to

the other side.

Step 6. Turn the Inner Shell on its side

and slide it down into the Outer

Shell.

Step 7. Assemble Inner Shell into Outer

Shell. Guide the sensor wire out

the top of the lock.

Step 8. Install spring into assembly. Use

caution not to stretch or other-

wise deform the spring.

Step 9. Gently press Cylinder Monitoring

Assembly into cylinder hole on

the new side of the lockbody.

An ASSA ABLOY Group brand

80-9086-0054-010 (07-14)

REX

LBM

LPM

DBM

DB-In

DB-Out

DPS

Door Position Sensor

Cylinder Monitor

REFERENCES

Request to Exit

Latch Bolt Monitor

Latch Performance Monitor

Deadbolt Motintor

ELECTRIFIED OPTIONS

Deadbolt

Deadbolt Retracted

Deadbolt Extended

* Deadbolt not available

with DPS function.

Product Support Tel 800.810.WIRE (9473) • www.yalelocks.com

Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their

respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication.

Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials.

Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.

Molex

8-Pin Function Color Function Color

1,2 Power Black/Red Power Black/Red

LPM Green/Gray

LBM Green/Green

5,6 DB-In Yellow/Yellow CX Brown/Brown

7,8 DPS*

(Less DB) Blue/Blue DPS* Blue/Blue

4-Pin Function Color Function Color

1,2 Open Loop REX White/White Open Loop REX White/White

3,4 Closed Loop REX Gray/Gray Closed Loop REX Gray/Gray

8891-ITS

3,4

8890 Options

-------------OR-------------

Altri manuali Assa Abloy Serratura

Assa Abloy

Assa Abloy Yale nexTouch NTM 610 Istruzioni di montaggio

Assa Abloy

Assa Abloy Sargent Profile v.S1 Manuale utente

Assa Abloy

Assa Abloy effeff EX118R Manuale utente

Assa Abloy

Assa Abloy OneSystem 309N Guida all'installazione

Assa Abloy

Assa Abloy SARGENT FM7300 Series Manuale utente

Assa Abloy

Assa Abloy Yale SIMPLICITY Manuale utente

Assa Abloy

Assa Abloy Securitron M38 Series Manuale utente

Assa Abloy

Assa Abloy Corbin Russwin IN120 Manuale utente

Assa Abloy

Assa Abloy Sargent FM6100 Series Manuale utente

Assa Abloy

Assa Abloy SARGENT 1655 Manuale utente

Assa Abloy

Assa Abloy MGL-01500ALS Series Manuale utente

Assa Abloy

Assa Abloy Abloy EL648 Manuale utente

Assa Abloy

Assa Abloy sFlipLock check 14471 Manuale utente

Assa Abloy

Assa Abloy Arrow AL-500 Series Manuale utente

Assa Abloy

Assa Abloy Lockwood 3P82TSS-A11E Manuale utente

Assa Abloy

Assa Abloy effeff EX118R Manuale utente

Assa Abloy

Assa Abloy Aperio Series Manuale utente

Assa Abloy

Assa Abloy EL580 Manuale utente

Assa Abloy

Assa Abloy Door Lock Manuale utente

Assa Abloy

Assa Abloy Securitron EPT-SC Series Manuale utente

Assa Abloy

Assa Abloy Sargent IN100 Manuale utente

Assa Abloy

Assa Abloy effeff 9338 Guida

Assa Abloy

Assa Abloy Yale YDD424A Manuale utente

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRC216 Specifiche tecniche

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente