Associated Electrics RC82 Manuale utente
10/11
2
:: Introduction
:: KIT Features :: RC8 Platform Features
:: Other Helpful Items
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
Thank you for purchasing this Team Associated product. This manual contains instructions and tips for building and maintaining your new RC8.2
Factory Team, 1/8 scale racing buggy. Please take a moment to read through it an familiarize yourself with these steps as they will help you to
understand each component’s function and show you some tips for getting the most out of your RC8.2 Factory Team build experience.
• 3mm Lengthened 7075 hard anodized chassis
• New Stronger A-arms with centerline shock mounts and optimized anti-roll
bar position.
• 16mm Big Bore Hard Anodized Threaded Shocks with 4mm Titanium Nitride
coated shafts
• 7075 Aluminum Low-CG Shock Towers with optimized geometry
• 7075 Aluminum suspension mounts front and rear
• 7075 Aluminum Steering Knuckles
• 7075 Aluminum Axles
• 7075 Aluminum Input Cups
• 7075 Aluminum one piece top plate
• Lightweight spur and diff gears
• Lightweight diff outdrives
• Aluminum steering posts
• CVA Boots on Center and Rear joints
• Dual Heat-Sink brake discs
• New Low-CG wing mount
• JConcepts Illuzion Wing
• JConcepts Illuzion Punisher Body
• 4.30:1 ratio gearboxes
• 43T diff ring and 10T pinion for increased punch and
durability over conventional buggy ratio gearboxes
• Brakes
• Heatsink brake discs included
• Brake cam stops ensure brakes aren’t dragging while on
throttle.
• Blue adjustable brake thumb wheels
• 2 piece Center diff housing split vertically for easy diff
removal and maintenance
• Caster blocks adjust 14, 16, or 18 degrees with molded
inserts
• Low profile elliptical 2-stage air filter
• High Torque capacity 3-shoe aluminum clutch
• PTFE clutch shim and easy to build design
• Adjustable with 0.9mm, 1.0 mm, and 1.1 mm springs
(not included)
• Fuel tank
• Easily removeable fuel tank only 2 body clips for easy
cleaning
• 3.5mm light CVA drivetrain
• Front and rear hubs use large 15 mm x 24 mm bearing
on the inside
• 14 other 8mm x 16 mm rubber sealed bearings
• Rear molded CVA boots to keep dirt and mud out of rear
joints
• Blue Aluminum hexes and nylon locking wheel nuts
Your RC8.2 FT kits comes with the latest components used by our factory race team to win races.
However there are some things that are necessary to complete the build.
• .21 class rear exhaust engine • Muffler, joining pack, or manifold spring (#28045 or #28049 recommended)
• 2 channel radio/transmitter set with switch – FM/PCM/2.4GHz recommended • Transmitter batteries (#302, 303 recommended)
• 4.8-7.4v receiver battery pack
• either flat (#613) or hump (#612) style NiMh battery
• either 1600mAh LiPo (#630), 2100mAh LiPo (#631), or 1700 LiFe (#638) battery (recommended)
• Model car fuel (30% nitro recommended) • Fuel bottle (#1748 recommended)
• Glow igniter (#1738 recommended) • Starter box (#1750 recommended)
• 1/8th scale buggy tires • CA (Cyanoacrylic) glue (#1597 recommended)
• Polycarbonate specific spray paint or polycarbonate specific bottled paint and airbrush
• Thread locking compound (#1596 recommended)
• Needle nose pliers • Hobby knife • Reamer/hole punch • Ride Height Gauge (#1449 recommended)
• Silicone Shock Fluid / Differential Fluid (Refer to catalog for complete listings)
• Body Scissors (AE Part # 1737) • Reamer / Hole Punch • FT Turnbuckle Wrench (#89240) • Hobby Knife
• FT Hex Wrenches (AE Part # 1541, 1655) • Needle Nose Pliers • Multi Tool (AE Part #7494) • Wire Cutters
• FT Nut Drivers (AE Part #1561, 1663-1668) • Calipers or a Precision Ruler • Green Slime shock lube (AE Part # 1105) • Soldering Iron
:: Additional Items Needed
3
Bag L
30-33.........Fuel Tank, Air Filter, Engine, and
Pipe Installation
Bag M
34................Wheels, Tires, and Body Install
34.................Building Tips
35................Chassis Tips
35................Front End Tips
36................Rear End Tips
37.................Droop Settings
38-49.........Catalog
49.................Contact Info
50.................Notes
51.................Setup Sheet “Kit Setup”
52................1:1 Hardware “Fold Out
53................Setup Sheet “Blank”
54................Back Cover
:: Table of Contents
:: Notes
This symbols indicates a
special note or instruction
in the manual.
!There is a 1:1 hardware foldout page in the back
of the manual. To check the size of a part, line
up your hardare with the correct drawing until
you find the exact size. Each part in the foldout
has a number assigned to it for ordering
replacement parts.
1....................Cover
2....................Introduction
3....................Table of Contents
BAG A
4....................Chassis Assembly
BAG B
4-5................Steering Assembly
Bag C
6-9................Front, Rear, and Center
Differential Assembly
Bag D
9-11.............Front Bulkhead Assembly
Bag E
11-14..........Front Suspension Assembly
Bag F
15-16..........Rear Bulkhead Assembly
Bag G
16-19..........Rear Suspension Assembly
Bag H
20-21..........Wing Assembly
Bag I
21-22..........Center Bulkhead Assembly
Bag J
23-25.........Shock Assembly
Bag K
26-30.........Radio Tray Assembly
Associated Electrics, Inc.
26021 Commercentre Dr.
Lake Forest, CA 92630
http://www.TeamAssociated.com · http://www.RC10.com · http://twitter.com/Team_Associated · http://bit.ly/AEonFacebook
Customer Service
Tel: 949.544.7500
Fax: 949.544.7501
4
:: Chassis Assembly - Bag A
:: Chassis Assembly (cont.) - Bag A
:: Steering Assembly - Bag B
89485
RC8B
aluminum
steering
posts
89476
FT RC8B
+3mm
chassis
89552
RC8.2
side
guards
25201
3x8mm
fhcs
89214
4x12mm
fhcs
89117
Diff
shim
89014
Steering
rack post
89161
5x8mm
bearing
89016
Servo
saver
spring
89016
Servo
saver
retainer
89016
Servo
saver
bolt
89015
Servo
saver
arm
89015
Servo
saver
bellcrank
x4
x2
x2
x2
x4
x2
x2
gap setting:
7mm
!
#1596
thread lock
#1596
thread lock
#6588
black grease
#1596
thread lock
5
:: Steering Assembly (cont.)- Bag B
:: Steering Assembly (cont.)- Bag B
:: Steering Assembly (cont.)- Bag B
89455
3x22mm
fhcs
31404
6x10mm
bearing
89075
RC8
steering
ballstuds
89077
Flanged
pivot ball
89242
Steering
drag link
25202
3x10mm
fhcs
89074
Steering
eyelet
25215
M3
locknut
89234
Aluminum
top plate
(blue)
89011
Front body
mount
89455
3x22mm
fhcs
89258
Front chassis
brace
(plastic)
29mm
89526
50mm steel
turnbuckle
x2
x2
x2
x4
x2
x2
#1596
thread lock
#1596
thread lock
#1596
thread lock
Smooth edge towards
drivers side!
Build Two
!
note the direction
of the body post
during installation.
!
89214
4x12mm
fhcs
89209
3x18mm
fhcs
x2
25215
M3
locknut
6
:: Front/Rear Differential Assembly - Bag C
:: Front/Rear Differential Assembly (cont.) - Bag C
:: Front/Rear Differential Assembly (cont.) - Bag C
Diff outdrive
differences
!
89120
Diff
washer
89121
Diff
O-Ring
89120
Diff
outdrive
pin
89120
Sun gear
89120
Spider
gear
assembly
25236
8x16mm
bearing 89477
Light
outdrives
(front, long)
89121
Diff
O-Ring
89478
Light
outdrives
(rear, short)
89115
Diff
housing
x2
Align pin with
groove in sun gear
!
#6588
black grease
#6588
black grease
Center Diff
Outdrive
Front Diff
Outdrive
(long)
Rear Diff
Outdrive
(short)
7
:: Front/Rear Differential Assembly (cont.) - Bag C
:: Front/Rear Differential Assembly (cont.) - Bag C
:: Front/Rear Differential Assembly (cont.) - Bag C
89120
Diff
outdrive
pin
89116
Diff
gasket
25236
8x16mm
bearing
89494
Light diff
ring gear
89477
Light
outdrives
(front, long)
89121
Diff
O-Ring 89121
Diff
O-Ring
89478
Light
outdrives
(rear, short)
Align pin with
groove in sun gear
!
#6588
black grease
#6588
black grease
#6588
black grease
89120
Sun gear
O-Ring
#6588
black grease
89120
Diff
washer
x2
89208
3x14mm
fhcs
x4
Diff fluid
5,000cst
Tighten screws
evenly and firmly.
Fill with diff fluid to
top of gears.
!
!
Build
front and
rear diffs!
!
8
:: Center Differential Assembly - Bag C
:: Center Differential Assembly (cont.) - Bag C
:: Center Differential Assembly (cont.) - Bag C
Align pin with
groove in sun gear
!
89120
Sun gear
89115
Diff
housing
25236
8x16mm
bearing
89121
Diff
O-Ring
89119
Diff
outdrives
(center)
89120
Diff
washer
x2
89121
Diff
O-Ring
89495
Light spur
gear
(44T)
89119
Diff
outdrives
(center)
25236
8x16mm
bearing
89121
Diff
O-Ring
#6588
black grease
#6588
black grease
#6588
black grease
89120
Diff
outdrive
pin
89120
Spider
gear
assembly
9
:: Center Differential Assembly (cont.) - Bag C
:: Center Differential Assembly (cont.) - Bag C
:: Front Bulkhead Assembly - Bag D
Align pin with
groove in sun gear
!
89120
Sun gear
89116
Diff
gasket
#6588
black grease
#6588
black grease
89120
Diff
outdrive
pin
Diff fluid
5,000cst
89120
Diff
washer
x2
89121
Diff
O-Ring
89103
Center CVA
bone
(front)
89557
Pin
retainer
O-ring
89106
CVA
u-joint
coupler
89106
CVA pin
89286
Gearbox
input cup
(aluminum)
89557
Pin
retainer
boot
89208
3x14mm
fhcs
x4
Tighten screws
evenly and firmly.
Fill with diff fluid to
top of gears.
Input cup has additional holes
for crosspin to extend the life of
the input cup.
!
!
!
!
:: Front Bulkhead Assembly (cont.) - Bag D
:: Front Bulkhead Assembly (cont.) - Bag D
:: Front Bulkhead Assembly (cont.) - Bag D
10
25236
8x16mm
bearing
89474
3x22mm
shcs
89224
3x16mm
shcs
89454
3x12mm
shcs
25215
M3
locknut
89221
5x4mm
setscrew
89481
Low
B-Plate
89538
RC8.2 front
shock tower
(aluminum)
89472
Front
bulkhead
spacer
89017
Inner
gearbox
89114
Diff pinion
gear
89117
Diff
shim
89017
Outer
gearbox
x2
x2
x2
x2
x4
x4
Key setscrew onto
flat side of shaft.
Tighten with no
endplay.
!
#1596
thread lock
!
!
Diff shims
installed to
gear diff, gear
diff installed to
gearbox.
!
Wrap boot over the O-Ring.
!
!
Altri manuali per RC82
1
Indice
Altri manuali Associated Electrics Giocattolo
Associated Electrics
Associated Electrics RC10 Worlds Car Kit Manuale utente
Associated Electrics
Associated Electrics 7058 Manuale utente
Associated Electrics
Associated Electrics RC12L3 4015 Manuale utente
Associated Electrics
Associated Electrics RB10 Manuale utente
Associated Electrics
Associated Electrics RC10TC6.2 Manuale utente
Associated Electrics
Associated Electrics RC18T Manuale utente
Associated Electrics
Associated Electrics RC10 Worlds Car Kit Manuale utente
Associated Electrics
Associated Electrics RC12LC Manuale utente
Associated Electrics
Associated Electrics 80930 Manuale utente
Associated Electrics
Associated Electrics B4.1 Manuale utente
