Asus Blitz Formula Manuale utente
Installing Fusion Block System accessory 1
Installing Fusion Block System accessory
Install your watercooling system to the motherboard using the bundled accessories
to obtain the best thermal solution.
Package contents
12
For watercooling system with 3/8” ID tubes
1. Firmlypressatubeclipandtthetubeintotheclip.
2. Press the clip and connect the tube to the waterblock. When done, release
the clip to tighten the two together.
3. Repeat Step 1 and 2 for another tube. Make sure that both tubes are well
connectedtopreventleak,andthenllthecoolantintothereservoir.
3/8” ID tubes x 2 1/2”to3/8”IDttingsx2 10mmto3/8”IDttingsx2
1/2” ID tube clips x 2tube clips x 2 3/8” ID tube clips x 6
2 Installing Fusion Block System accessory
56
5. Press the clip and connect the assembled tube to the waterblock. When
done, release the clip to tighten the two together.
6. Repeat Step 1 to 5 for another tube. Make sure that both tubes are well
connectedtopreventleak,andthenllthecoolantintothereservoir.The
picture shows a watercooling system installed to the motherboard.
3
2
14
For watercooling system with 1/2” or 10mm ID tubes
1. Insertatting(1/2”to3/8”IDor10mmto3/8”ID)intothetube.
Your watercooling system may come with tube clips. Use the clips to fasten the
ttingsandthetubestogether.
2. Connectasupplied3/8”IDtubetothetting.
3. Firmly press a tube clip and hitch it to the bottom end of the 3/8” ID tube.
4. Press another clip and hitch it to the top end of the 3/8” ID tube.
Altri manuali per Blitz Formula
1
Indice
Altri manuali Asus Accessori
Asus
Asus WS101 Manuale utente
Asus
Asus Xtion 2 Manuale utente
Asus
Asus ESC4000 G2 GPU Manuale utente
Asus
Asus MW Series Manuale utente
Asus
Asus Xtion Manuale utente
Asus
Asus Pen 2.0 Manuale utente
Asus
Asus ZenPower PD 10000 Manuale utente
Asus
Asus ABTU012 Manuale utente
Asus
Asus Xtion Manuale utente
Asus
Asus ZenPower PD 10000 Manuale utente
