ATD Tools ATD-81047 Istruzioni per l’uso
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
U.S. Patent # D 586,132
Other Patents Pending
!WARNING
To avoid pinch and laceration injuries:
Keep hands away from pinch and laceration
hazards points that are created during use!
Be alert and sober when using this product!
Sit centrally on seat pad ONLY. NEVER sit on
edge!
Heavy Duty
Tool Box Creeper Seat
Model Number
ATD-81047
Operating Instructions & Parts Manual
Capacity
450 lbs
WARNING: This product may contain chemicals, including lead, known to the State of California
to cause cancer, birth defects or other reproductive harm. Wash hands after handling.
2
Figure 1 - Model ATD-81047 Nomenclature
Rated Capacity: One (1) person weighing 450 lbs. or less- * includes person, tools, equipment, personal items
Do not use this device for any purpose other than that for which it is expressly intended.
!
PRODUCT DESCRIPTION
Thisdeviceisdesigned tosupport andtransport,along asmooth andlevel surface,oneperson, tools,and equipment
weighing *450 lbs. or less for the purpose of performing automotive maintenance or service. This device is not
intended, designed or engineered to be used for any other purpose.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted.
Any Tool Box Seat that appears damaged in any way, operates abnormally or is missing parts, shall be removed
from service immediately and the manufacturer QRWL¿HG If you suspect that this product was subjected to a shock
load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a
factory authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). It is
recommended that an annual inspection be done by TXDOL¿HG personnel. Labels and owner’s manuals are available
from manufacturer (see Replacement Parts, page 4).
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and/or operator shall have an understanding of safe use / operating procedures
before attempting to use. The owner and/or operator shall be aware that the use of this product may require special
skills and knowledge. Instructions and safety information shall be conveyed in the operator’s native language before
use of this device is authorized. If any doubt exists as to the safe and proper use of this product as outlined in this
factory authorized manual, remove from service immediately.
SPECIFICATIONS
Model Rated Capacity Overall Toolbox Dimension
Length, Width, Height Tool Drawer Inner Dimension
Length, Width, Height
ATD-81047 450 lbs 18-1/4" x 14-1/8" x 18-7/8" 12-3/4" x 7-5/8" x 2-3/8"
caster
rear tool tray
seat
tool drawer
front tool tray
hex key/philips screwdriver
combo tool
3
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
and Figure 2 illustration. If any part is missing or damaged, do not attempt to assemble, install or operate the
prod-uct.
ASSEMBLY INSTRUCTIONS (ref. Figure 2)
A Hex Key-Philips Screwdriver Combo Tool (J) is provided and should be the only tool needed to complete assem-
bly.
1. Join frame sections by inserting front frame section (F) into channel sections of tool box subassembly (A). Line
XSVFUHZKROHVDQGWKUHDGVFUHZV*¿WWHGZLWKZDVKHUV'LQWRFRUUHVSRQGLQJKROHVLQFKDQQHOVHFWLRQV'R
not tighten screws yet.
2. Assemble a caster (E) and a tool tray (C or H) simultaneously. Position a caster stud into lower frame hole as
seen in Figure 2. Place tool tray into position by aligning the lower frame thru-hole with corresponding hole in
tool tray. Insert caster fastener into the swivel caster stud.
3. Repeat assembly above for remaining casters and tool tray. Once tool trays have been successfully installed,
hand tighten all assemblies with provided Combo Tool.
4. Ensure casters swivel and roll easily. Check Tool Box drawers for ease of movement.
To avoid personal injury and property damage:
Read, understand, and follow all printed materials provided with and on this product before use.
Do not exceed rated capacity of 450 lbs. Rated capacity consists of: 1 person, tools, equipment totaling 450
lbs.
8VHRQVPRRWKOHYHOVHDPOHVVVXUIDFHVRQO\
6LWGRZQJHQWO\ Avoid shock loads caused by jumping or falling onto seat.
'RQRWVWDQGRQWKLVSURGXFW
.HHSRXWRIWKHUHDFKRIFKLOGUHQ This device is not appropriate for children’s use.
Package Contents List
Item 'HVFULSWLRQ Qty
A Tool Box Sub-Assembly 1
B Caster Fasteners 4
C Rear Tool Tray 1
'Flat Washer 2
E Swivel Caster 4
F Front Frame Section 1
G #2 Philips Screw 2
H Front Tool Tray 1
J Hexhead-Philips Screwdriver Tool 1
Figure 2- Assembly
!WARNING
OPERATING INSTRUCTIONS (Refer to Fig. 1, 2)
8QGHUVWDQGDQGIROORZDOOZDUQLQJLQIRUPDWLRQ
1. Load tool drawers carefully. Pull drawer open to remove, push to close.
2. After using a tool, wipe clean and dry before returning it to the tool box.
3. The toolbox seat is NOTVXLWDEOHIRUVWRULQJÀDPPDEOHFRPEXVWLEOHRUFRUURVLYHPDWHULDOV
H
F
E
G
'
C
B
A
J
DO NOT lubricate casters!
!
MAINTENANCE
Little maintenance is required of this device. Wipe clean as needed. Use mild upholstery cleaner (not caustic) to
clean seat as needed.
Keep hands away from pinch and laceration hazards points that are created during use! Be alert
and sober when using this product! Sit centrally on seat pad ONLY. NEVER sit on edge!
!
Replacement Parts List
Item Description Qty
92450-A-ATD Seat Cushion 1
92450-B Caster Fasteners 4
92450-C Rear Tool Tray 1
92450-D Flat Washer 2
92450-E Swivel Caster 4
92450-G #2 Philips Screw 2
92450-H Front Tool Tray 1
H
F
E
G
D
C
B
A
J
REPLACEMENT PARTS
Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of this kit are replace-
ment items, but are illustrated as a convenient reference of location and position in the assembly sequence. When
ordering parts, give Model number, serial number and description below. Call your distributor or point of sale for
current pricing.
Discover other automotive tools on our website.
Indice
Altri manuali ATD Tools Magazzinaggio
