ATEN CE790 Manuale utente

Altri manuali per CE790

2

Indice

Manuali Estensione popolari di altre marche

SY

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

CE790 Digital KVM Extender

Graphical User Interface (GUI)

User Manual

www.aten.com

CE790 GUI User Manual

2

FCC Information

This is an FCC Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

CE790 GUI User Manual

3

CE790 GUI Operation

Overview

A CE790 installation can be managed via a Graphical User Interface (GUI) on

systems that are running Windows. In order to use this management utility, two

separate items of software must be installed on all of the PCs in your

installation – WinPcap and the CE790 AP. This procedure is detailed in the

following sections.

Before You Begin

WinPcap

The CE790 GUI is a WinPcap-based application. WinPcap is the industry-

standard tool for link-layer network access in Windows environments. For

further information, go to www.winpcap.org.

To install WinPcap on your PC, do the following:

1. Download the WinPcap executable file from the website, and run it.

2. Follow the instructions on the screen. The installation applet will

automatically detect the operating system and install the correct drivers

3. WinPcap-based applications are now ready to work. Download the CE790

AP as below.

CE790 AP

To download the WinPcap-based CE790 AP in order to use the Browser GUI

to manage your CE790 installation, do the following:

1. Download the CE790 AP from the ATEN website (www.aten.com).

2. Save the file to a convenient location.

3. Click on the file to open the CE790 GUI.

CE790 GUI User Manual

4

GUI Main Page

The CE790 Management Utility is a convenient and intuitive method to

manage your complete CE790 installation from one screen. To invoke the GUI,

simply click on the CE790 icon in your file system. The main page appears:

The various elements of the GUI are described in the following sections.

Network Adapters

The Network Adapters section has a drop-down menu with a list of the network

adapters on the PC that are available to work with this application. To select a

network adapter, do the following:

1. Select an adapter from the drop-down menu.

2. Click Set Adapter to confirm your selection.

CE790 GUI User Manual

5

Connections

The Connections section displays the connections between the CE790T

Transmitters and CE790R Receivers in the installation. It also displays basic

configuration information for each unit – topology (Unicast or Multicast –

Transmitters only); IP address; and Mac address.

To view the latest list of CE790T Transmitter and CE790R Receiver units

currently connected in the installation, click Refresh.

To disconnect a CE790R Receiver from a CE790T Transmitter in the

installation, tick the checkbox next to the Receiver and click Delete

Receiver.

CE790 GUI User Manual

6

Available Receivers

The Available Receivers section displays the CE790R Receivers that are

currently attached to the installation and are available for connection. Select a

CE790R Receiver in this list to view detailed information in the CE790

Configuration section. See CE790 Configuration, page 7.

Receivers

The Receiver section has a drop-down menu of CE790R Receivers that are

available to connect to CE790T Transmitters.

To connect a CE790T Transmitter to a CE790R Receiver, select a

Transmitter in the Connections section (see page 5) by ticking its

checkbox. Then, select a CE790R Receiver from this drop-down menu

and click Add. The Transmitter connects to the selected Receiver.

CE790 GUI User Manual

7

CE790 Configuration

The CE790 Configuration section displays details about the Transmitter or

Receiver units that have been selected, and allows you to change the

configuration information of the selected unit.

Name – Each unit can be given a name (15 characters or less, upper case

only)

IP Address – The unit’s IP address can be changed here.

MAC – The unit’s MAC address displays here.

Topology – The unit’s topology can be configured here. Options are

Multicast and Unicast.

Select Multicast if you want the selected CE790T to be able to connect

to multiple CE790Rs.

Select Unicast if you want the selected CE790T to be able to connect

to a single CE790R only.

Note: Only CE790T Transmitters have configurable topology.

After you have made each of your changes, click Change to confirm your

selection.

CE790 GUI User Manual

8

Backup Receivers

The Backup Receivers section displays the backup CE790R Receivers for

selected CE790T Transmitters, depending on the CE790T’s topology (see

page 7).

If the selected CE790T is configured as “Unicast,” you can set one

CE790R as Backup 1. The CE790T will attempt to connect to this backup

CE790R if it loses the connection with its current CE790R for more than

five seconds.

If the selected CE790T is configured as “Multicast,” you can set two

CE790Rs as Backup 1 and Backup 2. The CE790T will attempt to connect

to Backup 1 if it loses the connection with its current one for more than

five seconds; then it will try Backup 2; then Backup 1 again, and so on.

Log

The Log section displays all the events that take place in the Browser GUI, in

addition to displaying error messages.