Atid AT880 Manuale utente
Guide for Customer
AT880
2
ATID Co., Ltd
ATID is a registered trademark of ATID Co., Ltd.
AT880 is a registered trademark of ATID Co., Ltd. and of its wholly owned subsidiaries.
ATID Co., Ltd.
#1205, Byuksan/GyungIn Digital Valley II, #481-10,
Gasan-Dong, Gumchon-Gu, Seoul, Korea
Tel: +82-2-544-1436
Fax: +82-2-2113-0040
www.atid1.com
Disclaimer
Copyright ⓒ2006 ATID Co., Ltd. An Unpublished Work – All right reserved.
No part of the contents of this documentation or the procedures described there in may be reproduced or
transmitted in any form or by any means without prior written permission of ATID Co., Ltd.. or its wholly owned subsidiaries ("ATID ").
Owners of ATID products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business
purposes.
Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting ATID Customer Administration. Electronic versions may either be
downloadable from the ATID web site (www.atid1.com) or provided on appropriate media.
If you visit our web site and would like to make comments or suggestions about this or other ATID publications, please let us know via the “Contact ATID ” page.
3
Contents
Page Contents
6
Before using manual for AT880
Chapter 1. Caution when using AT880
7
1. How to use battery correctly
7
2. Caution when using AT880
Chapter 2. Product composition
8
1. Product composition
9
2. Name of each part
10
3. Function of each part
22 16. LOCK
Chapter 3. Basic function
11 1. Switch On Backup Battery
12 2. Attaching and Detaching the battery
13 3. Charging battery
13 4. Power On and O
15 5. Checking Battery Gauge
16 6. Backup Battery
16 7. Battery replacement
17 8. Soft Reset
17 9. Hard Reset
18 10. Initializing System
19 11. Attaching Micro SD card
20 12. Attaching SIM Card and SAM Card
21 13. Shortcuts setting
21 14. Set up phone password
22 15. Owner information
4
Page Contents
Chapter 3. Basic function(continues)
23 17. Memory
23 18. Task Manager
24 19. Remove the program
20. GPS
25 21. Set screen brightness
25 22. Backlight ON/OFF set up
26
33. Data transfer
Chapter 4. Optional module
37 1. Using 1D or 2D barcode scanner
40 2. Barcode emulator setting
44 3. Barcode scanning
45 4. Wi Power On /O Wireless Zero Conguration
46 5. How to connect AP (1)
47 6. How to connect AP (2)
48 7. WiFi Power On /O Summit client utility
24
23. Screen adjustment
26 24. Volume and sounds setting
27 25. Sounds and notication
26. Set up the Clock and Alarms
28 27. Wireless Manager
28 28. Using keypad
28
27
29. Inputting Data
30. Using <Fnc> Button
29 31. Use of stylus
30 32. Connecting PDA to PC
34
29
5
Page Contents
Chapter 4. Optional module(continues)
49
50
52
53
54
54
55
55
56
57
57
58
58
59
60
61
61
62
62
63
53
8. Bluetooth connection and termination
9. Bluetooth Pairing
10. Bixolon SPP-R200 Printer Demo
11. How to use Phone
12. Dialing
13. Receiving Phone Call
14. Hang off Phone Call
15. Contact List
16. How to search a contact information
17. Add to contact list
18. How to use Text Message
19. Sending Message
20. Receiving Message
21. Replying Message
22. GPS demo application execution
23. Use of camera
24. HF13.56 demo application execution
25. Mifare tag recognition
26. ISO15693 tag recognition
27. SmartCard demo application execution
28. UHF 900MHz demo application execution
Chapter 5. Appendix
67 1. Product specication
6
■
◆
●
Before using manual for AT880
User guide inclusive of text, images, logos, product names is either the property of, or used with permission by ATID CO.LTD. The information may not be distributed,
modied, displayed, reproduced (in whole or in part) without the prior written permission of ATID CO.LTD.
There are some dierences between user guide and actual function of device.
User guide can be adjusted by ATID CO.LTD without consent of user discretionally.
User guide is written for users who want to use and maintain the AT880. Please read and understand these instruction prior to operating this unit.
Safety information
Your safety is extremely important. Read and follow all warnings and cautions in this document before you handle and operate ATID equipment. If you do not follow
the safety warnings and cautions, you might be seriously injured, and the equipment and data also might be damaged.
WARNIING
A warning requires you must pay attention to the operating procedure practice, condition, and statement strictly, or might be injured seriously.
CAUTION
A caution alerts you that you must be observe strictly when you operating procedure, practicing, conguring, for preventing from damage and destruction of
equipment, and loss of data.
NOTICE
A notice provide you the information which you must needs while you using AT880.
7Chapter 1. Caution when using AT880
•
Caution when using AT880
Please aware of the manual contents in advance before you handle and operate your AT880 and other ATID Products.
How to use battery correctly
In case that you dropped the main body or battery in water, please do not put into the stove or heater for drying. Just keep it in natural drying or contact purchase
place.
Please note that the battery terminal doesn’t have to be contacted to metallic object.
If you do not use the battery for a long time, please keep it at room temperature after charging.
Operating time of battery can be shorter than usual in accordance with loss of battery and use time. In this case, please contact us.
You have to use provided adaptor when charging the device.
Turn o the device properly then detach or replace the battery.
Caution when using AT880
•
•
•
•
•
•
•
•
•
User careless or products repair would damage the stored data. Manufacturer is not responsible for this damage, so please do back-up the important data
separately.
If you have a problem on product, do not try to repair or disassemble it by yourself, please contact our customer service center.
Do not use your product at the specic places such as hospital, plane and so on where electromagnetic wave or the risk may occur.
Please note that using the device in environment of high temperature and humidity for long hours can make a malfunction of device.
•
•
In case of that noise, smoke and odor occur at the device while using product, please disconnect the charger with device and o the power immediately, then
please contact our customer service center.
If you have any other questions on use of device, please contact our customer service center.
8Chapter 2. Product composition
Product Composition
Product composition
Open the packing box and conrm the items as below.
*Please contact our customer service in defect of product composition and need to be changed.
5. Protect lm
3. Standard battery
6. Hand strap
2. Power Adapter and AC cable
1. AT880 main body
4. USB sync cable
This is built on the Windows Embedded Handheld 6.5. The PDA could equip with Barcode Scanner and so on devices as optional items.
Its various function applied to Industry, Enterprise, Logistics and so on, can be used extensively in many elds.
7. Stylus pen
9
Name of each part
Camera ash (option)
Camera (option) 1D/2D Scanner
(option)
UHF
Gun handle
Chapter 2. Product composition
Reset button
Touch Screen
Keypad
Microphone
Phone receiver
Charge LED
WLAN LED
(option)
Scan key
Internal HF
Volume button Scan button
Battery latch
Hand strap hole
Battery
UHF Connecting port
Speaker
Earphone jack
Cradle connector
Charger jack Sync cable connector
10
Function of each part
Chapter 2. Product composition
NAME FUNCTION
Enable you to connect and send data to PC via USB sync cable.Sync cable connector
Enable you to connect to earphone.
Earphone jack
Camera (option) It is possible to image capture and save.
Charger jack Enable you to connect to adaptor which provided from factory.
Enable you to connect to PC or charging the battery while using cradle.Cradle connector
Battery latch
Battery
Scan button (F7, F8)
It is possible to scan barcode or RFID tag
Scan key
Charger LED will be Red when the battery is charging, or will be green when it is charged completely.Charger LED
Enable you to input key value (number, alphabets, symbol), or executing assigned programs.Keypad
Display running programs, and could execute, use, and exit programs via to touch the screen.Touch screen
Internal HF
Hand strap hole
Enable you to perform a warm Reset, Press <Power>button simultaneously, Enable you to perform a hard ResetReset button
Enable you to conduct communicationMicrophone
Displays whether the wireless WLAN power supply
WLAN LED (option)
HF 13.56MHz Embedded module mounting location.
Enable you to attach a hand strap or a stylus for the convenience of using, while need to use the device for a long period time.
Build-in speaker, which could emit various sound eects.
Speaker
Enable you to install a UHF 900MHz tag reader module.
Enable to supply the power to the product.
Enable you to detaching and attaching the main battery.
It is possible to scan barcode or RFID tag
UHF Connecting port
You can use the camera with ash
Camera ash (option)
Laser beam emitted through this window. Please be careful the foreign substances and preventing from the damage.
Warning! Do not look at the laser beam directly.
1D/2D Scanner (option)
Altri manuali per AT880
1
Indice
Altri manuali Atid Lettore di codici a barre
Atid
Atid RF-PRISMA Manuale utente
Atid
Atid AT911 PLUS Manuale utente
Atid
Atid ATS200 Manuale utente
Atid
Atid AT911N series Manuale utente
Atid
Atid AT188N Manuale utente
Atid
Atid AT907 Manuale utente
Atid
Atid AT188N Plus Manuale utente
Atid
Atid AT870A Manuale utente
Atid
Atid XC-ATS100 Manuale utente
Atid
Atid AT388 Manuale utente
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
