Au3Tech C4 Manuale utente
C4 Cutting head Users Manual
By Au3tech Research Pty Ltd
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
2
Introduction
Overview
This document mainly describes the appearance, application scenarios,
installation, debugging, operation, maintenance, etc of C4 fiber laser
process head.
Reader Objects
This document mainly is applicable to the following personnel:
•Installation engineers
•Maintenance engineers
•Operators
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
3
Table of Content
Introduction....................................................................................................................................2
Table of content .............................................................................................................................2
1 Overview ......................................................................................................................................4
1.1 Product Overview.......................................................................................................................4
1.2 Products feature.........................................................................................................................5
1.3 Cutting head parameters...........................................................................................................5
2 Structure Specifications.............................................................................................................6
2.1 C4 Fiber laser cutting head brief................................................................................................6
2.1.1 C4 flatbed cutting head...........................................................................................................6
2.1.2 C4 3D cutting head.................................................................................................................7
2.1.3 C4 fine cutting head................................................................................................................8
3 Installations.................................................................................................................................9
3.1 Pre-installation preparation........................................................................................................9
3.2.1 C4-QBH100-F125 and C4-QBH100-F150........................................................................10
3.2.2 C4-3D-QBH100-F125 .......................................................................................................11
3.2.3 C4-FC-QBH100-F50.........................................................................................................12
3.4 QBH Connection......................................................................................................................14
4 Focus Adjustments...................................................................................................................15
4.1 Focus centering .......................................................................................................................15
4.2 Z position adjustments.............................................................................................................16
5 Operation &Maintenance..........................................................................................................17
5.2 Collimator and focus lens maintain..........................................................................................19
5.2.1 Take out of lens holder.........................................................................................................19
5.2.2 Assemble the lens holder .....................................................................................................19
6 Technical Indexes.....................................................................................................................21
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
4
1Overview
1.1 Product Overview
C4 series flat-bed cutting head is a kind of fiber laser cutting head suitable for median to high
power. It can cut stainless steel of maximum thickness 7 mm and carbon steel of maximum
thickness 15 mm with best cutting quality. It features with water cooling and draw design for
protective windows. Fiber interface is available with only QBH connector. Best support 1000W to
2000W application.
Fiure1-1 Product Appearance
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
5
1.2 Product Features
Support multiple kinds of focal length (125mm, 150mm)
Support multiple kinds of fire-optic link (QBH, QD)
Focus module design with high-precision
Centering control module design with precision
Protection lens box can be quickly disassembled
Optimized smooth gas circuit design; multiple kinds of auxiliary gases; the maximum
atmosphere pressure can reach 2.5MPa
1.3 Cutting head parameters
Since different cutting heads have different focal lengths and optical chucks, the following
parameters are described with chuck QBH and focal lengths 125mm as an object. For other
configuration parameters, please connect the technical engineers ofAut3tech.
Maximum power
1500W
Focal length
125mm, 150mm
Collimation focal length
75mm, 100mm
Diameter of focus lens
30mm
Nozzle aperture
1mm to 3mm
Length of cutting head
341mm@FL=125mm
Weight
2.6KG@FL=125mm
Maximum atmosphere pressure of auxiliary gas
2.5MPa
Maximum outer diameter
64mm
Available focusing ranges
-6mm to +9mm
Type of optical fiber splice
QBH
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
6
2Structure Specifications
2.1 C4 Fiber laser cutting head brief
C4 fiber laser cutting are designed for flatbed cutting, 3D cutting and fine cutting.
2.1.1 C4 flatbed cutting head
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
7
2.1.2 C4 3D cutting head
C4 3D series is designed for 3D cutting. It comes with longer focus length than normal flat-bed
cutting heads. In term of larger aperture and longer focus length, the depth of focus can achieve
longer than usual, so the cutting curve can be better quality. The tip of the head is small and
straight for 3D or tube cutting.
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
8
2.1.3 C4 fine cutting head
C4-FC series is designed for fine cutting. It comes with shorter focus length than normal flat-bed
cutting heads or 3D cutting heads. In term of larger aperture and short focus length, the focus
spot can achieve smaller and it is better for thin metal cutting.
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
9
3Installations
3.1 Pre-installation preparation
Before installing C4 cutting head, please ensure fiber-optic chuck is sealed and during
installation, never remove sealing.
Table 3-1 List of Tool Preparation
Name of Tool
Picture
Main Functions
No.3 socket head
wrench
Backboard of cutting head connects slipway
No.2 socket head
wrench
Focus lens center
3.2 Installation Dimension of Cutting Head
Cutting head and machine tool are fixed by dead plates. On the backboard, there are six M5
fixing holes. Just as shown in the figure, when installing, tight up the corresponding position of
screw and Z-axis link block of machine tool; at the same time, installation position can be
adjusted according to customer requirements.
Copyright © AU3TECH RESEARCH PTY LTD
C4 Cutting head Users Manual By Au3tech Research Pty Ltd
10
3.2.1 C4-QBH100-F125 and C4-QBH100-F150
(Contact us for more details)
Indice
Altri manuali Au3Tech Attrezzature industriali
