AudioCodes MP-104 Manuale utente

eltathree Inc

AudioCodes MediaPack

Gateways Series

Installation Instructions

Last Update: Decem er 2006

AUDIOCODES MEDIAPACK GATEWAYS SERIES SET-UP INSTRUCTIONS

This document p ovides two diffe ent methods to set up you MediaPack VoIP Gateway with

deltath ee:

Dial Tone Mode: Your gateway, configured with pre-defined Calling Accounts, will produce a dial tone, enabling

your users to pick up the phone and dial the destination number to make calls.

IVR Mode: Your gateway is configured to connect with deltathree's Interactive oice Response (I R) System.

Once connected, voice prompts direct your users to enter their Calling Account information and destination

number in order to make a call.

IMPORTANT!!

Please be su e to note which of the inst uctions below apply to you MediaPack model and you

desi ed settings

Step 1: Connect the AudioCodes MediaPack Gateways to the inte net

1. Prior to configuration, make sure that you have a hub and a Static IP ready for the AudioCodes

MediaPack gateway.

2. Connect all of the appropriate cables - see table below.

Cable

MediaPack Gateway

AC powe co d

Connect you powe supply to the 100-

250V~ 50-60 Hz powe socket on the

ea panel of the gateway.

10/100 Base-T Ethe net Cable

Plug in the cable to the 10/100 Base-T

RJ-45 po t on the ea panel of the

gateway and to you hub connected to

you netwo k. (MP-104, MP-108 have one

10/100 Base-T RJ-45 port, and MP-124 has

two 10/100 Base-T RJ-45 ports.)

RJ-11 Telephone co ds

Connect you egula analog telephon

to the RJ-11 po ts on the ea panel of

you gateway.

3. The “LAN” and “Ready” lights on the front of the gateway will be green, indicating that the

gateway is connected to the internet and a power supply.

Step 2: Set Up all Relevant Configu ation Files

1. Download and install the BootP configu ation p og am

Download the BootP Files from deltathree

(http://download.deltathree.com/download/AudioCodes/boot/bootp.zip) and save it to a

local drive.

Install the BootP softwa e on the compute that is located on the same LAN of the

AudioCodes and that both a e connected to the same hub.

2. Download and ext act the MediaPack Gateway configu ation files:

IMPORTANT: make sure you download the file which is appropriate to your MediaPack

Gateway model and your desired calling method (Dial-Tone vs. I R)

MediaPack

Gateway Model

Configu ation Files Links

Dial-Tone:

http://download.deltath ee.com/download/AudioCodes/4po tFXS-

DialTone.zip

MP-104

IVR:

http://download.deltath ee.com/download/AudioCodes/4po tFXS-

IVR.zip

Dial-Tone:

http://download.deltath ee.com/download/AudioCodes/8po tFXS-

DialTone.zip

MP-108

IVR:

http://download.deltath ee.com/download/AudioCodes/8po tFXS-

IVR.zip

MP-124

Contact you Account Manage

3. Create a local directory that will contain the extracted configuration files:

MediaPack

Gateway Model

Configu ation Files

Dial-Tone:

•MP1xx10_1_fxs.dat

•usa_tones.dat

•MP104_SIP_4_20_354_571.cmp

•fxs_104_ DialTone.ini

MP-104

IVR:

•MP1xx10_1_fxs.dat

•usa_tones.dat

•MP104_SIP_4_20_354_571.cmp

•fxs_104_I R.ini

Dial-Tone:

MP1xx10_1_fxs.dat

usa_tones.dat

MP108_SIP_4_20_354_571.cmp

fxs_108_DialTone.ini

MP-108

IVR:

MP1xx10_1_fxs.dat

usa_tones.dat

MP108_SIP_4_20_354_571.cmp

fxs_108_I R.ini

MP-124

Contact you Account Manage

Step 3: Configu ing you MediaPack Gateway

1. Open the BootP p og am.

Click on “Edit” and then on “Preferences”; The BootP program will access the files that appear in

the “Directory” field. Set the directory location to the MediaPack configuration directory that you

created on your local hard drive (Step 2.3 above).

2. On the BootP main sc een, make su e that the top left “pause” button is not

p essed down.

3. Click on “Edit Clients.”

A new window called “Client Configuration” will open. Click on “Add New Client.”

Complete the form with the following information:

MAC Add ess - find the MAC Address on a sticker located at the bottom of the AudioCodes

Client Name - pick any name you want

Template - none

IP - Static IP of your gateway

Subnet - Subnet Mask

Gateway - Default Gateway

TFTP Se ve IP - your computer's IP address (this will be a different IP from your

gateway's IP address)

Boot File - should be MP104_SIP_4_20_354_571.cmp (MP-104 users) or

MP108_SIP_4_20_354_571.cmp (MP-108 users)

i. Click on the Boot File field, go to the end of the line, and add a space and “-fb”.

The file name should appear like this: ‘MP104_SIP_4_20_354_571.cmp -fb’

(MP-104 users) or ‘MP108_SIP_4_20_354_571.cmp -fb’ (MP-108 users)

INI file - use the scroll down button to select your .INI file (this should be the .INI file that

appears in your AudioCodes configuration directory)

Call Agent - your computer's IP address

4. Click on “Apply & Reset” and then OK. Keep the BootP main window open.

You should see on the BootP main screen a list showing the progress of the 4 files that are

being uploaded to the MediaPack Gateway. If you don't see anything on the BootP screen

after 1 minute un-plug the power cord from the MediaPack Gateway and plug it back in.

5. Fo Dial-Tone Configu ation ONLY

a. Make sure to have up to 4 deltathree Calling Accounts ready to use (each Calling Account

is a 12 digit User ID and Password).

b. Open your internet browser and go to http://your AudioCodes' IP address

(http://xxx.xxx.xxx.xxx)

c. Click on the “Protocol Management” link

d. Click on “Authentication”

e. Enter in your User IDs and Passwords in the “User Name” and “Password” fields - each

UserID will be configured with a specific port.

f. Click on “Submit” and then click on “Save Configuration”

Step 4: Sta t using you AudioCodes MediaPack Gateway

After all the files are uploaded to the MediaPack Gateway and the “LAN” and “Ready” lights are

green, you are ready to make calls.

Altri manuali per MP-104

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali AudioCodes Portale

AudioCodes

AudioCodes MediaPack MP-402 Manuale utente

AudioCodes

AudioCodes Mediant 2000 Manuale utente

AudioCodes

AudioCodes Mediant 8000 Manuale di istruzioni

AudioCodes

AudioCodes MediaPack Manuale utente

AudioCodes

AudioCodes MediaPack MP-1 Series Manuale utente

AudioCodes

AudioCodes MediaPack MP-11x Series Manuale utente

AudioCodes

AudioCodes Media Pack MP-124 Manuale utente

AudioCodes

AudioCodes Mediant 2000 Manuale utente

AudioCodes

AudioCodes Mediant 800B Manuale utente

AudioCodes

AudioCodes Mediant 1000 Manuale utente

AudioCodes

AudioCodes Media Pack MP-124 Manuale utente

AudioCodes

AudioCodes Mediant 500 Manuale utente

AudioCodes

AudioCodes Mediant 500L MSBR Istruzioni per il montaggio

AudioCodes

AudioCodes MediaPack MP-11x Series Manuale utente

AudioCodes

AudioCodes Mediant 800 Manuale utente

AudioCodes

AudioCodes Mediant 1000B Istruzioni per il montaggio

AudioCodes

AudioCodes MediaPack 124 Istruzioni per il montaggio

AudioCodes

AudioCodes Mediant 1000B Istruzioni per il montaggio

AudioCodes

AudioCodes Mediant 3000 Manuale utente

AudioCodes

AudioCodes MediaPack MP-114 Manuale utente

AudioCodes

AudioCodes MediaPack MP-124 Manuale utente

AudioCodes

AudioCodes Media Pack MP-124 Manuale utente

AudioCodes

AudioCodes MediaPack 1288 Manuale utente

AudioCodes

AudioCodes Mediant 1000 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente