August MR410 Guida per l'amministratore
How-To Guide
August MR410 Bluetooth Audio Transmitter
Check You Have
All the
Components
•MR410 Transmitter
•USB to USB-C Adapter
•Instruction Manual
Ensure You Have The
Adapter, USB-C or USB
Audio Source, and
Wireless Headset /
Speaker / Earphones
•This Transmitter will allow Non-
Bluetooth games consoles,
phones, and other USB / USB-C
Devices to play audio wirelessly
on Bluetooth Headphones,
Earphones, Speakers...
Choose USB-
C or USB
Use the included adapter to
change from USB-C to USB if
needed
Find the USB or USB-C Port on Your Device
The USB Port will look like this The USB-C Port will look like this
Enter Pairing Mode
•Use The Circular Buttons To Begin Pairing a Device
•Keep your Device close during pairing
•Ensure the Headphones, Earphones, Speaker etc. is also in pairing
mode according to its own instructions
Pass Through
Charging
To use Pass Through Charging Plug
a USB-C charging cable in to the
USB-C port on the MR410, while it
is already inserted into your Switch,
phone, etc.
Disconnect all Devices
To disconnect all paired devices hold the Bluetooth pairing buttons for
~ 5 Seconds
Hold
Indice
Altri manuali August Trasmettitore
August
August CM200 Manuale utente
August
August DVB-T405 Manuale utente
August
August WT601N Manuale utente
August
August CR150 Manuale utente
August
August MR270-HD Manuale utente
August
August CR100 Manuale utente
August
August MR250 Manuale utente
August
August MR270 Manuale utente
August
August CR220 Manuale utente
August
August WT605N Manuale utente
