Aukey BR-O8 Manuale utente
User Manual
2-in-1 Wireless Transmitter and Receiver
Contents
English 01 ~ 13
Italiano 50 ~ 61
Deutsch 14 ~ 25
Français 26 ~ 37
Español 38 ~ 49
- 01 -
Thank you for purchasing the AUKEY BR-O8 2-in-1 Wireless Transmitter and Receiver.
Please read this user manual carefully and keep it for future reference. If you need
any assistance, please contact our support team with your product model number
and Amazon order number.
Package Contents
2-in-1WirelessTransmitter and Receiver
Micro-USB Cable
3.5mm Audio Cable
3.5mm to RCA Audio Cable
Toslink Optical Cable
User Manual
Warranty Card
Model
Technology
Frequency Range
Input
Operating Range
Dimensions
Weight
BR-O8
BT 5.0, aptX, aptX-LL
2.402GHz – 2.480GHz
DC 5V
Up to 50m / 164ft
113 x 110 x 73mm / 4.45” x 4.33” x 2.87”
300g / 10.58oz
- 02 -
Specifications
- 03 -
Product Diagram
Bypass Mode
Receiver Mode
3.5mm Audio Output
Optical Output
Powered Off
BT Mode
Transmitter Mode
3.5mm Audio Input
Optical Input
Charging Input
Connect one end of the included 3.5mm audio cable or Toslink optical cable to
the 3.5mm audio output or optical output of BR-O8. Connect the other end to
your wired audio equipment (wired headphones, speaker, or stereo system). You
can also plug your audio equipment cable directly into BR-O8 instead
Connect the BR-O8 to a power source with the micro-USB cable
Slide the RX/TX switch to “RX” position and slide the Power/Mode switch to “BT”
position
Tap and hold for 3 seconds, and the BR-O8 will enter pairing mode with the
square connection status indicator flashing white rapidly
Activate the pairing function of your wireless-compatible audio device (like a
smartphone) and select “AUKEY BR-O8”
Once paired, there will be a solid white “A” indicator on the display
If you want to pair with a second wireless-compatible audio device for dual
device connection, repeat steps 4 & 5 with that device
Once paired, there will be solid white “A” and “B” indicators on the display
1.
2.
3.
4.
5.
6.
7.
8.
- 04 -
Getting Started
Receiver Mode (RX Mode)
Connect one end of the included 3.5mm audio cable or Toslink optical cable to
the 3.5mm audio input or optical input of BR-O8. Connect the other end to your
audio source device (TV, computer, DVD player, CD player, or MP3 player) that
doesn’t have wireless function
Connect the BR-O8 to a power source with the micro-USB cable
Slide the RX/TX switch to “TX” position. Then slide the Power/Mode switch to “BT”
position
Tap and hold for 3 seconds, and the BR-O8 will enter pairing mode with the
square connection status indicator flashing green rapidly
Activate the pairing function of your wireless-compatible audio device (like
wireless headphones or speaker). Keep your device close to the BR-O8 and they
will pair automatically
1.
2.
3.
4.
5.
If your speaker or stereo system has left & right channel RCA inputs (colored white
and red respectively), you can use the included RCA cable to connect instead
When simultaneously connected with two devices, the BR-O8 can only accept
audio input from one device at a time
●
●
- 05 -
Notes for Receiver Mode
Transmitter Mode (TX Mode)
Once paired, there will be a solid white “A” indicator on the display
If you want to pair with a second wireless-compatible audio device for dual
device connection, repeat steps 4 & 5 with that device
Once paired, there will be solid white “A” and “B” indicators on the display
6.
7.
8.
If your TV, DVD player, or CD player has left & right channel RCA outputs (colored white
and red respectively), you can use the included RCA cable to connect instead
●
When you turn on the BR-O8, it will automatically reconnect to the last-paired
device
The BR-O8 will exit pairing mode after 1 minute
To clear the pairing list, tap and hold for 8 seconds in RX or TX Mode
The maximum wireless operating range is 50m (164ft). If you exceed this range,
the BR-O8 will disconnect from your paired device. The connection will be
re-established once you re-enter the wireless range within 5 minutes
●
●
●
●
- 06 -
Note for Transmitter Mode
Notes for Receiver & Transmitter Modes
Connect an audio source device (TV, computer, DVD player, CD player, or MP3
player) to the BR-O8 3.5mm audio input or optical input with the included 3.5mm
audio cable or optical cable
Connect your wired audio equipment (wired headphones, speaker, or stereo
system) to BR-O8 3.5mm audio output or optical output with a 3.5mm audio cable
or optical cable
Connect the BR-O8 to a power source with the micro-USB cable
Slide the Power/Mode switch to “BYPASS” position
Tap to select the audio input mode “AUX” or “OPT”
Once connected, you can enjoy boosted sound from your wired audio equipment
1.
2.
3.
4.
5.
6.
Only one of each cable type is included, so you will need to use two different
cable types to connect your two devices to BR-O8 (or supply a second cable if
you want to use two the same). If your connected audio equipment has left &
right channel RCA outputs (colored white and red respectively), you can also use
the included RCA cable to connect
●
- 07 -
Bypass Mode
Note
- 08-
Status Indicators
Indicator
RX
TX
OPT
AUX
A
B
Status
Receiver mode
Transmitter mode
Optical audio input mode
3.5mm audio input mode
Device A connected
Device B connected
SBC
APTX
LL Connected Bluetooth device supports
aptX Low Latency audio codec
Connected Bluetooth device supports
aptX audio codec
Connected Bluetooth device supports
SBC audio codec
Indice
Lingue:
Altri manuali Aukey Ricevitore
