The dos and don’ts of dispensers
Legal Information
4
The dispenser must be installed properly
on a solid surface or structurally adequate
wall using appropriate mounting
hardware. Aunt Flow recommends that
the dispenser be installed by a qualified,
professional contractor.
The dispenser roller inside the cabinet
may create a pinch point. To avoid
injury, do not insert fingers upwards into
the dispenser cabinet at the opening
where the product is dispensed. If the
product is not dispensed, contact
hello@goauntflow.com.
When operating the dispenser, always
press on the center of the dispenser
button and never allow your finger to
slip into the space between the
depressed button and the cabinet.
Properly maintain the dispenser at all
times.
Only use the dispenser as designed and
intended, reloading with only Aunt Flow®
Tampons and Pads.
Never hang or pull on the dispenser.
The dispenser is not designed to
support additional weight.
The dispenser’s internal parts present
pinch points that could cause finger or
hand injuries unless avoided. Do not
open the dispenser cabinet unless you
have read and fully understand these
instructions. To avoid injury, do not
cause the internal gears or arms to
operate or move while fingers or hands
are near the moving parts.
Do not attempt to repair the dispenser.
If the dispenser fails to work properly,
contact hello@goauntflow.com.
Do not subject the dispenser to
misuse, abnormal use, or abuse.
Do not modify or alter the dispenser
in any way.
Do not expose the dispenser to
abnormal heat, water, or other
environmental conditions.
Don’tDo
Copyright Aunt Flow 2022 – Patent Pending Dispenser + Product, ALL RIGHTS RESERVED
Questions + Additional Languages: hello@goauntflow.com 562-320-8250
|
SCAN HERE
Installation Videos
Loading Videos
Download Guides
