AURES ODP 444 Manuale utente

Receipt Printer User’s Manual

MODEL : ODP 444

All specifications are subject to change without notice

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions.

1) This device may not cause harmful interference, and

2) This device must accept any interference received,

including interference that may cause undesired operation.

Jeff Burroughs

15042 Parkway Loop, Building D, Tustin, CA 92780 | USA

+714.669.3111

Le Groupe Aures vous remercie de votre confiance.

Téléchargez nos derniers drivers et utilitaires

ainsi que nos conseils d’installation sur le site

du Support Technique AURES :

www.aures-support.fr

The AURES Group thanks you for your loyalty.

To download out most recent drivers and utilities and

obtain advice regarding the installation of your equipment,

please visit the AURES Technical Support Website :

www.aures-support.fr/UK

Die AURES Gruppe bedankt sich für lhre Bestellung.

Um unsereneuesten Treiber, Utilities

und Konfigurationsratschläge zu lhren Produkten

herunterzuladen besuchen Sie bitte unsere

technische Support-Website :

www.aures-support.fr/DE

Table of Contents

1. Parts Identications 3

2. Setting up the printer 4

2.1 Unpacking 4

2.2 Connecting the cables 5

2.3 Loading the roll paper 8

2.4 Cable cover 설치 및 분리 10

2.5 Jam Error 12

3. Control panel and other functions 15

3.1 Control panel 15

3.2 Error Indicating 15

4. Self Test 16

5. ASCII Print 17

6. ECO Mode 17

6.1 Font 17

6.2 Paper Reduce 18

6.3 Density 18

7. Printer Setting 19

7.1 Baudrate 19

7.2 Cutter 19

7.3 Error Beep 19

8. Hexadecimal Dump 20

9. Peripherals Connection 21

9.1 Bluetooth Connection 21

9.2 Wi-Fi Connection 21

9.3 NFC Connection 22

10. Printer Cleaning 23

11. Specications 24

12. Command List 26

1. Parts Identifications

CONTROL PANEL

FEED BUTTON

COVER OPEN PUSH BUTTON

POWER SWITCH

Features LED indicators

to indicate printer status

and switches to operate

the printer.

Push down this button to

open the printer cover.

Used to turn on/off

power to the printer.

PRINTER COVER

Open this cover to load or

replace a paper roll.

2-1. Unpacking

Your printer box should include these items. If any items are damaged or missing, please contact your

dealer for assistance.

The Printer CD Roll Paper

2. Setting Up the Printer

Adaptor Serial Cable 1 Serial Cable 2

USB Cable

2-2. Connecting the Cables

All cables connect to the connector panel on the back of the printer which is shown below:

Before connecting any of the cables, make sure that both the printer and the computer are turned off.

CASH DRAWER CONNECTOR ETHERNET CONNECTOR

ETHERNET SWITCH

POWER CONNECTOR USB CONNECTOR SERIAL CONNECTOR

2-2-1. Interface Connector

<9 Pin Serial> <USB “B” Type>

9Pin Serial Interface

Pin Signal I/O Description

2 RXD Input Printer receive data line RS-232C level

3 TXD Output Printer transmit data line RS-232C level

4, 7 DTR Output Printer handshake to host line RS-232C level

5 GND - System Ground

6 DSR Input Data Send Ready

1,8,9 NC -

USB Interface

Pin Signal I/O Description

1 +5V - +5V

2DATA- - Printer transmit data line

3DATA+ - Printer transmit data line

4 GND - System Ground

Ethernet Interface

PIN SIGNAL I/O

1 Data Out + Output Data +

2 Data Out - Output Data -

3 Data IN + Input Data +

4N.C

5N.C

6 Data IN - Input Data -

7N.C

8N.C

This equipment is indoor use and all the communication wirings are limited to inside of the building.

2-2-2. Cash Drawer Connector

The printer can operate a cash drawer with a 6 pin RJ-11 modular connector.

The driver is capable of supplying a maximum current of 1.0A for 510ms or less when not printing.

PIN SIGNAL DESCRIPTION

1 Signal GND -

2 Drawer kick-out drive signal 1 Output

3 Drawer open/close signal Input

4 +24V -

5 Drawer kick-out drive signal 2 Output

6 Signal GND -

2-3. Loading the Roll Paper

Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the

paper glued to the core because the printer cannot detect the paper end correctly.

♣Turn off power switch.

1. Make sure that the printer is not receiving data; Otherwise, data may be lost.

2. Open the printer cover by pushing down the cover open push button.

3. Remove the used paper roll core if there is one inside.

4. Insert new paper roll as shown.

Indice

Altri manuali AURES Stampante

AURES

AURES ODP 300 Manuale utente

AURES

AURES TRP100 Manuale utente

AURES

AURES TRP100 Manuale utente

AURES

AURES ODP 300 Manuale utente

AURES

AURES Posligne ODP-1000 Manuale utente

AURES

AURES SMP 58 Manuale utente

AURES

AURES ODP 333 Manuale utente

AURES

AURES SLP 580 Manuale utente

AURES

AURES SMP 58 Foglio di istruzioni

AURES

AURES TRP100-III Manuale utente

AURES

AURES ODP-200H-III Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente