Autel MaxiTMPS Manuale utente

Table of Contents

1. Safety Precautions and Warnings.......................................1

2. Tool Information ..................................................................2

2.1 Tool Description .........................................................2

2.2 Specifications ..............................................................3

2.3 Accessories Included..................................................3

2.4 Navigation Characters...............................................3

2.5 Battery Replacement .................................................4

2.6 Product Setup .............................................................4

3. Diagnostics ............................................................................6

3.1 Activating....................................................................6

3.2 Viewing Data ............................................................10

3.3 Deleting Data ............................................................11

4. Printing and Updating .......................................................12

5. Warranty and Service ........................................................14

5.1 Limited One Year Warranty ..................................14

5.2 Service Procedures...................................................14

1. Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or the code

reader, read this instruction manual first and observe the

following safety precautions at a minimum whenever working on

a vehicle:

zAlways perform automotive testing in a safe environment.

zWear safety eye protection that meets ANSI standards.

zKeep clothing, hair, hands, tools, test equipment, etc. away

from all moving or hot engine parts.

zOperate the vehicle in a well ventilated work area: Exhaust

gases are poisonous.

zPut blocks in front of the drive wheels and never leave the

vehicle unattended while running tests.

zUse extreme caution when working around the ignition coil,

distributor cap, ignition wires and spark plugs. These

components create hazardous voltages when the engine is

running.

zPut the transmission in PARK (for automatic transmission) or

NEUTRAL (for manual transmission) and make sure the

parking brake is engaged.

zKeep a fire extinguisher suitable for gasoline/chemical/

electrical fires nearby.

zDon’t connect or disconnect any test equipment while the

ignition is on or the engine is running.

zKeep the TPMS tool dry, clean, free from oil/water or grease.

Use a mild detergent on a clean cloth to clean the outside of the

code reader, when necessary.

2. Tool Information

2.1 Tool Description

○

1LCD DISPLAY -- Indicates test results. Backlit, 128 x 64 pixel

display with contrast adjustment.

○

2UP SCROLL BUTTON -- Moves up through menu and submenu

items in menu mode. When more than one set of data were retrieved,

moves down to next screens for additional data.

○

3DOWN SCROLL BUTTON -- Moves down through menu and

submenu items in menu mode. When more than one set of data were

retrieved, moves down to next screens for additional data.

○

4N BUTTON -- Cancels a selection (or action) from a menu or

returns to previous menu.

○

5Y BUTTON -- Confirms a selection (or action) from a menu, or

returns to previous menu.

○

6POWER BUTTON -- Turns on/off the tool.

○

7ANTENNA -- Sends signals to tire sensor to activate sensor.

2.2 Specifications

1) Display: Backlit, 128 x 64 pixel display

2) Operating Temperature: 0 to 50°C (32 to 122 F°)

3) Storage Temperature: -20 to 70°C (-4 to 158 F°)

4) Power: 9v battery

5) Dimensions:

Length Width Height

178.3 mm (7.02”) 82 mm (3.23”) 28.8 mm (1.34”)

6) NW: 0.5lbs (1.1lb), GW: 0.7lbs (1.54lb)

2.3 Accessories Included

1) Molded plastic case

2) USB cable

3) Magnet (For early model TPM sensors)

4) One 9-volt battery

5) User’s Manual

6) CD software

2.4 Navigation Characters

Characters used to help navigate the code reader are:

1) “►”-- Indicates current selection.

2) “1/6” -- Indicates total items in a menu and their sequence.

3) “ ” -- Indicates there is data stored in the tool.

4) “ ” -- Indicates battery volume.

2.5 Battery Replacement

The tool requires a 9v cell battery to operate. When the icon

appears, replace the battery as instructed below:

1) Locate the battery cover on the back of the tool.

2) Remove the battery cover screw and slide the battery cover off.

3) Insert a 9V cell battery into the compartment.

4) Reinstall battery cover by sliding battery cover on and installing

screw.

•Replace battery in time; otherwise the test results may be

incorrect.

•If the tool is not used for a long period, remove the battery to

prevent damage from battery leakage.

2.6 Product Setup

The tool allows you to make the following adjustments and settings:

1) Contrast: Adjusts the contrast of the LCD display.

2) Backlighting: Turns on/off backlighting.

•The Settings of the unit will remain until change to the existing

settings is made.

To enter the setup menu

Use UP/DOWN scroll button to select System Setup from Main

Menu, and press Ybutton.

MainMenu

Delete Data

►System Setup

6/6

Contrast Adjustment

1) From System Setup menu, use UP/DOWN scroll button to select

Contrast, and press Ybutton.

2) Use UP/DOWN scroll button to adjust contrast.

3) Press Ybutton to save your settings and return to previous menu.

Backlighting

1) Use UP/DOWN scroll button to select LCD Backlighting and

press Ybutton.

Contrast

Contrast （11%）

Use ↑or↓to change

No Yes

SystemSetup

►Contrast

LCDBacklighting

1/2

SystemSetup

Contrast

►LCD Backlighting

2/2

2) A message comes up asking your confirmation.

Areyousureto turn

onLCD backlighting?

No Yes

3) Press Ybutton to turn on backlighting or Nbutton to turn it off.

3. Diagnostics

3.1 Activating

The sensor activation function allows activating of TPM (Tire

Pressure Monitoring) sensor to view sensor data such as sensor ID,

frequency. It also enables the vehicle ECU to learn the positions of

sensors whenever tires and wheels are rotated or sensors are

replaced.

There are two means of activating a TPM sensor:

A: Sensor make: to activate the sensor by selecting sensor

manufacturer.

B: Vehicle make: to activate the sensor by selecting vehicle

manufacturer, and model year.

1) Press POWER button to turn on the tool, and wait until the

Main Menu comes up.

2) Point the antenna at a tire near the valve stem.

To activate by selecting sensor make

1) Use UP/DOWN scroll button to select Sensor Make Scan from

Main Menu, and press Ybutton to confirm.

MainMenu

Quick Scan

►Sensor Make Scan

Vehicle Make Scan

ViewData 2/6

2) Use UP/DOWN scroll button to select the sensor manufacturer

from Select Sensor Make menu, and press Ybutton to confirm.

zIf you do not know the sensor makes your vehicle uses, use

UP/DOWN button to select Auto Scan to detect the sensor

automatically.

SelectSensorMake

Schrader

►Siemens

TRW

Beru 2/5

SelectSensorMake

►Auto Scan

1/5

3) Wait a few seconds till the tool makes an audible alarm.

4) View retrieved data on screen.

ID: 0X216843

Frequency: 315MHz

Mode:ASK

zIf the sensor can not be detected, a “No sensor detected!”

message shows on the screen.

zThe tool automatically records retrieved data in html format.

5) Press Nbutton to return to previous menu.

To activate by selecting vehicle make

1) Use UP/DOWN scroll button to select Vehicle Make Scan from

Main Menu, and press Ybutton to confirm.

2) Use UP/DOWN scroll button to select vehicle manufacturer, and

press Ybutton.

SelectVehicle Make

►Acura

Audi

BMW

Buick 1/38

MainMenu

Quick Scan

Sensor Make Scan

►Vehicle Make Scan

ViewData 3/6

3) Use UP/DOWN scroll button to select vehicle model, and press

Ybutton.

4) Use UP/DOWN scroll button to select year.

5) Press Ybutton to activate the sensor.

6) Wait a few seconds till the tool makes an audible alarm.

7) View retrieved data on screen.

SelectModel

►MDX

RDX

TL 1/5

SelectYear

►2004-06

2007

1/2

TRW

ID: 0x216843

Frequency: 315MHz

Mode:ASK

8) Press Nbutton to return to previous menu.

Indice

Altri manuali Autel Apparecchiature diagnostiche

Autel

Autel MaxiTPMS TS508 Manuale utente

Autel

Autel MaxiCheck DS808BT Manuale utente

Autel

Autel MaxiTPMS TS508 Scheda informativa del prodotto

Autel

Autel MaxiDiag Pro MD801 Manuale utente

Autel

Autel OTOFIX EvoScan Ultra Manuale utente

Autel

Autel MaxiTPMS TS501K TPMS Manuale utente

Autel

Autel MAXIRT IR100 Istruzioni operative

Autel

Autel MaxiAP AP200H Manuale utente

Autel

Autel MaxiTPMS TS401 Manuale utente

Autel

Autel MaxiCheck MX808 Manuale utente

Autel

Autel MaxiDAS DS808S Manuale utente

Autel

Autel MaxiSys MS906TS Manuale utente

Autel

Autel MaxiDAS DS708 Manuale utente

Autel

Autel MaxiSys MS909CV Manuale utente

Autel

Autel MaxiBAS BT609 Manuale utente

Autel

Autel MaxiPro MP808 Manuale utente

Autel

Autel MaxiSys Elite II Pro Manuale utente

Autel

Autel MOT Pro Manuale utente

Autel

Autel MaxiSys MS908SP Manuale utente

Autel

Autel MaxiPRO MP808K Manuale utente

Autel

Autel TS609 Manuale utente

Autel

Autel MaxiIM KM100 Manuale utente

Autel

Autel OTOFIX BT1 Manuale utente

Autel

Autel AutoLink AL2300 Manuale utente

Manuali Apparecchiature diagnostiche popolari di altre marche

Mindray

Mindray M7Vet Guida rapida

TEXA

TEXA TMD2 Manuale utente

Sealey

Sealey BT2012 Manuale utente

Diagnoptics

Diagnoptics Age Reader Manuale utente

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Manuale utente

Hella Gutmann

Hella Gutmann Mega macs X Manuale utente

Foxwell

Foxwell I80TS Manuale utente

KaVo

KaVo 3D eXam Manuale utente

ATEQ

ATEQ VT46 Manuale utente

Hella Gutmann

Hella Gutmann mega macs X Manuale utente

Qiagen

Qiagen QIAcube Connect MDx Manuale utente

Alber

Alber BDSU Manuale utente

St. Jude Medical

St. Jude Medical QUANTIEN Manuale utente

Bosch

Bosch DCU 100 Manuale utente

Launch

Launch CNC-602A Manuale utente

Innova

Innova 3568 Manuale utente

FujiFilm

FujiFilm ED-580XT Manuale utente

Snap-On

Snap-On Zeus Manuale utente