Auto Page Telematics and Tracking Module Manuale utente
POWERED BY MOSHI®
Telematics and Tracking
Module
OPERATIONS MANUAL
Software users guide
Winner of the 2008 CES
Best of Innovations Award
Please register your product at:
i. Hardware Installation 4
ii. Subscription Requirements and Account setup 4
1.0 Installation and Removal 4
1.1 Installing C|3 on your phone 4
1.2 Removing C|3 from your phone 4
2.0 Configuration and Activation 5
2.1 Configuring your C|3 software 5
2.2 Activating your C|3 software 5
3.0 Using your phone to control your vehicle 5
3.1 Launching C|3 5
3.2 Selecting functions using your phone controls 6
3.3 Navigating menus and Executing vehicle functions 7
4.0 Options menu and Navigating tips 8
4.1 Set and Disable PIN
8
4.2 Activate / Reset / update C|3 8
4.3 Connection Options and select
9
4.4 Demo and Active Modes 10
4.5 Help 10
4.6 About 10
5.0 Exiting C|3 10
6.0 Alert and Notifications 10
6.1 Alert Overview 10
6.2 Settings 11
6.3 Vehicle Speed alerts
11
6.4
Geo
-
Fence Movement Alerts
11
hig
hly recommended that a remote still be accessible for the
operation of the vehicle in case a cellular system outage occurs.
•The C|3 will operate anywhere covered by the cellular system.
In some remote areas there will be no cellular coverage for the
system to operate. This can depend on the carrier, terrain and
environmental factors that can interfere with normal cell phone
operation.
•It is highly recommended that a data and text message plan be
purchased for the phones controlling the C|3 in your vehicle or
vehicles. This will prevent additional billing from your cell phone
provider. The C|3 uses compact data bursts that are typically
very small in size however these could add up.
•This unit as well as the user’s cell phone MUST be programmed
before they will operate. Please see dealer and user
programming contained in this manual.
•Insure that a cell phone is not being used to control the vehicle
when working on that vehicle. Always install a safety hood
switch when installing a remote start devise. Please see your
alarm or remote starter manual for additional precautions.
•This product will only work with C|3 compatible Auto Page
products and ADS data modules.
•A data module is not required for the operation of C|3.
•Full vehicle information can only be achieved in selected vehicles
that have CAN systems. This information is always being
updated and added as these vehicles become available. Please
be sure that your data module is downloaded with the latest
software and two-way protocol.
•Never operate the C|3 when driving the vehicle.
•Never leave small children or pets in an unattended vehicle.
•Always install and test the remote starter or alarm system 100%
before proceeding to install the
. All operations must work
ii.
Subscription Requirements and Account Setup
C|3 requires that you subscribe to a prepaid service that provides cellular
connectivity to your vehicle system. The subscription service will be
billed to you when you register your C|3 system and download the
software to your cellular phone. You can download the C|3 software to
as many cellular phones as you wish without incurring additional C|3
subscription costs. Go to www.c3.gomoshi.com to learn more. If you
purchase a subscription with limited monthly usage you will be notified
when you are approaching your limit and you will have the opportunity to
buy additional uses for the current month. These additional uses will
expire at the end of your usage period and do not roll over.
[NOTE: The C|3 system will not function until the registration
process is completed and the subscription account is properly
setup!]
1.0 Installation and Removal
1.1 Installing C|3 On Your Phone
The C|3 application can be downloaded during the account setup
process in the C|3 customer portal. To log into the customer portal, visit
www.c3.gomoshi.com. A text message containing a link will be sent to
your phone enabling you to download the application or access C|3 via
the internet browser on your phone. If you are unable to access this link
within the text message, you may manually type it into your phone's
browser. Note, different versions of the C|3 applications are compatible
with various phones. Please visit www.c3.gomoshi.com to get the
appropriate version for your device.
1.2
Removing C|3 From Your Phone
2.1
Configuring
Your
C|3
Software
When C|3 is downloaded and installed on your phone, it comes in a ‘Not
Activated’ state, that is to say that it is not connected to any vehicles.
Follow the instructions on the website to Activate your C|3 software to
your vehicle. Log on to your account at www.c3.gomoshi.com to retrieve
your activation code. The configuration established by your professional
installer during the installation of the vehicle hardware will be transferred
to your phone during activation. You can always add additional features
to your C|3 system. Ask your professional installer about additional
modules to control other vehicle systems that are C|3 compatible. Any
changes after the initial setup can be transferred to your phone by
selecting the “Update C|3” option from the options menu within the C|3
application on your phone.
2.2 Activating Your C|3 Software
C|3 is designed to allow your phone (and other phones on your account)
to securely access your vehicle system. This is accomplished by
assigning a unique passkey to your phone such that the Moshi™
network can properly verify that your phone is authorized to control your
vehicle system. This unique passkey is assigned to your phone when
you activate the C|3 software you have downloaded. The activation
process automatically assigns your unique passkey; you only need to
follow the instructions in your account on the C|3 web portal and on your
phone to complete this process. This step only needs to be completed
one time for each phone on which you load the C|3 software. If your
phone gets reset or you need to reinstall the C|3 software, you will need
to activate your software again. Please go to www.c3.gomoshi.com and
log into your account to add phones or reinstall the C|3 software.
3.0
Using Your Phone to Control Your Vehicle
Applications”.
Once the C|3 application is downloaded to your phone it should appear
in the list of applications in this menu. Some phones allow you to assign
‘Soft Keys’ to certain applications via the setup or customization menus.
For example, the C|3 application can be setup to start by selecting the
Right or Left ‘Soft Key’ on your phone. Once you have found the
application in the menu, it can be launched as any other application, by
scrolling to the application name and selecting ‘OK’, or ‘Select’.
3.2 Selecting Functions Using Your Phone Controls
There are several different methods of controlling the functions of C|3,
depending on the capabilities of your phone.
•Most modern cellular phones have navigation keys (up, down,
left, right) as well as an ‘OK’ or select button. These navigation keys can
be used to highlight and select icons within C|3 application. Refer to
Figure 3.2.1 for an example of what your navigation keys may look like.
•Another method of selecting icons and executing functions within
the C|3 application is to utilize the alphanumeric keypad (number
buttons) on your cell phone. Refer to Figure 3.2.1 for an example of how
to execute functions using these keys.
•Certain Windows Mobile devices have touch screens. You can
execute C|3 functions by touching the associated icons on the screen
with the stylus (or your finger).
•If you have an iPhone then you are using the web based version
of C|3. All of the multi-touch features of your web browser function
exactly as they normally do. You can zoom in or out or touch the icons
on the screen to execute functions with your iPhone.
•Lastly, you can activate “Short Cut Keys” within C|3 by selecting
the “Enable Shortcuts” option from the C|3 main menu. These shortcuts
3.3 Navigating Menus and Executing Vehicle Functions
Figures 3.3.1 through 3.3.5 demonstrate the general operation of
vehicle system functions. Although all of the functions are not explicitly
demonstrated, they each operate in generally the same manner.
Figure 3.3.1 –C|3 Splash Screen / Main Menu
This 'splash screen is
displayed briefly when
C|3 is launched.
4.0 Options Menu and Navigation Tips
The C|3 Main Menu contains functions that you can use to customize the
setup of your phone. Items such as a Personal Identification Number
(PIN) or activation of short cut codes can be turned on or off to fit your
needs. Depending on the model of your phone, these menu options may
appear in adifferent order than listed below, but they will function as
described.
4.1 Set PIN / Disable PIN
4.1.1 Set PIN
For security purposes, you can setup a PIN that will prevent
unauthorized people from accessing the C|3 software on your phone. It
is important to note that no personal information is contained within the
C|3 application, and at no time is personal information transmitted from
your phone from the C|3 application (please visit www.c3.gomoshi.com
for details about our privacy policy).
The default configuration of C|3 has the PIN feature disabled. If you
would like to set a PIN code that you must enter each time you use C|3,
you must select ‘Set PIN’ from the C|3 Main Menu. When you select ‘Set
You can then select a function utilizing the
same navigation keys to move around the
menu and pressing 'OK'. A message stating
“Sending Request” will be displayed followed
by a confirmation message.
Menu. [Note: If you disable the PIN feature, an unauthorized user that
has access to your cellular phone may be able to utilize the C|3 software
to access your vehicle system.]
4.2 Activate / Reset / Update C|3
4.2.1 Activate C|3
See Section 2.2 for details about C|3 activation and why it is important.
To activate your C|3 software, select ‘Activate’ from the Options Menu.
(NOTE: If ‘Activate’ does not appear in the Options Menu then your
software has already been activated and does not need to be activated
again unless you have problems accessing your vehicle system from
your phone.) When you select ‘Activate’, your phone will prompt you for
your 12-digit activation code. Your phone will then send this code to the
Moshi database for verification and notify you that “Activation was
successful”. This code can only be provided via the C|3 customer portal
website. If you need to reinstall the phone software, or you do not have
an activation code you may acquire one by logging in to your account at
www.c3.gomoshi.com and clicking on the ‘My Phones’ tab. There
you will see options to either reinstall your software (Download C|3), or to
request a new activation code (Activate C|3). The “Download C|3” option
will send a message to your phone containing the download link, as well
as generate a new activation code. If the C|3 software is already on your
phone and you are just activating it, you can select the “Activate C|3”
link, as you do not need to download the software again. Just enter the
new 12-digit activation code into the Activate screen within the C|3
application on your phone. (NOTE: Activation codes are only valid for
one activation, and they expire after 24 hours.)
4.2.2 Re
set C|3
There are some Options Menu commands that are specific to
BlackBerry® devices. These commands enable the C|3 application to
properly send commands over the internet as well as make use of the
‘thumb wheel’ navigation control on the BlackBerry® device.
4.3.1 Connection Options
If you have a BlackBerry® device, it is necessary to set the connection
settings of your BlackBerry® so C|3 can access the internet to
communicate with your vehicle system. You may set these connection
settings by selecting the ‘Connection Options’ command in the Options
Menu. You will then be prompted to select your cellular carrier. If you do
not see your cellular carrier, you can try the ‘Direct TCP’ option. If you
are still having issues controlling your home automation system with your
BlackBerry®, please contact customer service at 1.877.466.6744.
4.3.2 Select
For a BlackBerry® device, the ‘Select’ command is always located at the
top of the Options Menu. This allows you to use the thumb wheel to
navigate through the C|3 menus. You may make a selection by
depressing the thumb wheel. This brings up the Options Menu and,
since ‘Select’ is at the top, depressing the thumb wheel a second time
will navigate the menus and execute functions.
4.4 Demo/Active Mode
Demo Mode may be activated if you wish to temporarily show someone
the C|3 menus. In this mode, no signals will be sent over the network to
Altri manuali per Telematics and Tracking Module
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Software popolari di altre marche
PS Audio
PS Audio PowerPlay Manuale del proprietario
Brady
Brady LOCKOUT PRO 3.0 Manuale di servizio
Avaya
Avaya Interaction Center Manuale utente
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuale
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuale utente
Oracle
Oracle Application 9i Manuale utente
Acer
Acer RDM Manuale utente
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente