Avantree Priva Manuale utente

Avantree Priva User Manual

Priva

aptX Low Latency Multipoint Bluetooth Transmitter

Wireless audio streaming with aptX low latency technology for Hi-Fi level sound quality, supports

2 receivers

1. Features

Avantree Priva is a Bluetooth audio transmitter incorporating the latest “aptX Low Latency”

technology, for high quality audio streaming with virtually no delay.

With multipoint receiver support, Priva allows you to share the fun and enjoyment of music with

others.

2. Overview

①. LED indicator

Indicates Priva status. (Tips: Check page 9

for status details.)

②. Multi-Function Button (MFB)

Pairing / Wake up / Connect

③. Micro USB charging socket

④. 3.5mm audio jack

Incorporates power On/Off control

⑤. Battery / DC switch

⑥. Magnetic base

What’s in the box:

①. Avantree Priva

②. Magnetic base

③. 3.5mm audio cable

④. RCA audio cable

⑤. Micro USB charging cable

⑥. User manual

⑦. Quick start guide

⑧. Warranty card

3. Charging

Avantree Priva comes with a built-in rechargeable battery.

It can be used in two different ways –

1. Battery mode - Switch to battery mode for use as a portable device.

2. DC mode - Switch to DC mode and connect to a DC power source for powered use to

save using the internal battery.

In battery mode, users are advised to fully charge the battery before starting. This normally takes

3 hours. Switch to BATTERY MODE before charging.

4. Getting Started

4.1 Power On/Off

■When using with a power source (either in battery mode or DC mode), the 3.5mm audio cable

gives the on/off signal to the device. Plug it to Priva to turn the device on and unplug it to turn

the device off.

Once powered on, Priva will automatically search for the last paired device.

■If found, then it will connect.

■If not found, Priva enters pairing mode (see below)

4.2 Pairing and connect

Step-1: Priva will automatically enter pairing mode after power on. (refer to above)

Step-2: Put your headphones/speaker into pairing mode.

Step-3: The two devices will contact and connect. Once connected, the LED indicator will slow

down. (Details on Page 9)

Step-4: Connect Priva to the sound source, such as your TV, and enjoy wireless audio streaming.

4.3 Connect to the 2nd device (optional)

Step-1:Connect to your 1st device as above.

Step-2:Press and hold the MFB for 7 seconds. Priva will enter pairing mode again.

Step-3: Enter the 2nd device into pairing mode and wait until they connect.

Notes: When connected to two devices, Priva will be operate in SBC mode only.

5. Wake up and reconnect

■Auto off (Sleep mode): Priva will automatically power off if not connected with any device for

10min.

■Wake up: Priva can be woken up by pressing and holding MFB for 2s when in sleep mode.

■Auto reconnect: Once powered up, Priva will auto-reconnect with the last connected device.

■Manual reconnect: If auto-reconnect does not occur, reconnect can be activated by pressing

and holding MFB for 2s

6. Restore Factory Default Settings

Step-1: Power off Priva.

Step-2: Power on and let Priva enter into pairing mode.

Step-3: Double click the MFB; Priva’s BLUE and RED LEDs are both on.

Step-4: Restart Priva.

7. LED indications

Status

LED indicator

Power on

Blue LED on for 1sec

Power off

Red LED on for 1sec

Pairing mode

LEDs blink blue and red alternately

Pairing success

Blue LED on for 3sec

Connected with SBC codec

Blue LED flashes once every 5sec

Connected with aptX codec

Blue LED flashes 2 times every 5sec

Connected with aptX-LL codec

Blue LED flashes 3 times every 5sec

Connected with Fast Stream codec

Blue LED flashes 4 times every 5sec

Disconnected

Blue LED flashes once every 10sec

Restored factory default settings

Both blue & red LEDs on for 2sec

Low battery

Red LED flashes twice every sec

8.Product Specifications

■Bluetooth 3.0 with EDR

■Bluetooth profile: A2DP

■Audio codec: aptX-LL, aptX, SBC, Fast Stream

■Operating Range: Class 2, 10 meters

■Supports pairing of 2 devices at once

■Play time: up to 8 hours

■Standby time: up to 120 hours

■Battery: 250mAH rechargeable Li-Po battery

■Weight: Body part approx. 23g; Base approx. 7g

■Size: 48mm(L) x 48mm(W) x 15mm(H)

Note:

Working and standby times may vary when used with different Bluetooth devices, usage settings,

usage styles and environments.

Altri manuali per Priva

Indice

Altri manuali Avantree Trasmettitore

Avantree

Avantree Orbit Pro Manuale utente

Avantree

Avantree BTDG-60 Manuale utente

Avantree

Avantree BTTC-418 Manuale utente

Avantree

Avantree Orbit Manuale utente

Avantree

Avantree WSTR-2403 Manuale utente

Avantree

Avantree Oasis Plus Manuale utente

Avantree

Avantree BTDG-50 Manuale utente

Avantree

Avantree BTCK-310 Manuale utente

Avantree

Avantree Saturn Pro Manuale utente

Avantree

Avantree BTTC-418-P Manuale utente

Avantree

Avantree BTDG-60 Manuale utente

Avantree

Avantree 2x Saturn Pros Manuale utente

Avantree

Avantree BTTC-318 Manuale utente

Avantree

Avantree TC026 Manuale utente

Avantree

Avantree Priva Manuale utente

Avantree

Avantree TC026 Manuale utente

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente