Avaya P117F(R) Manuale utente

Avaya

Installation Guide

P117F(R)

STACKABLE ETHERNET SWITCH WITH ATM

UPLINK

Preface

P117F(R) Stackable Switch Installation Guide 1

Important Information

SAFETY PRECAUTIONS

CAUTION – TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE

1. All servicing should be undertaken ONLY by qualified personnel. The parts inside the unit

CANNOT be serviced or repaired by the end user. Please call your service representative

for assistance.

2. Do NOT plug in, turn on or attempt to operate a damaged unit.

3. Ensure that the chassis ventilation slots in the unit are NOT BLOCKED.

4. Replace a “blown” fuse only with the same type and rating as is marked on the safety label

adjacent to the power inlet housing the fuse.

5. DO NOT operate the unit in a location where the maximum ambient temperature exceeds

50ºC.

6. Be sure to unplug the power supply cord from the wall socket BEFORE attempting to

remove and/or check the main power fuse.

PRECAUTIONS DE SECURITÉ

AVERTISSEMENT – POUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE ET D’INCENDIE

1. Tout entretien doit être fait UNIQUEMENT par un personnel de service qualifié. Aucun

élément ne peut être réparé par un particulier.

2. NE PAS brancher, allumer ou essayer de faire fonctionner une unité sur laquelle un doute

existe quant à son bon fonctionnement.

3. S’assurer que les ouvertures d’aération du châssis dans l’appareil NE SONT PAS

OBSTRUEES..

4. Remplacer un fusible défaillant UNIQUEMENT par un modèle du même type suivant les

recommandations indiquées sur l’étiquette de securité posée dans le logement du fusible.

5. NE PAS faire fonctionner l’appareil dans un endroit où la temperature dépasse les 50ºC.

6. S’assurer de débrancher l’alimentation électrique AVANT toute manipulation sur le fusible

principal.

SICHERHEITSVORKEHRUNG

ACHTUNG – ZUR VERHINDERUNG DES RISIKOS VON ELEKTRISCHEM SCHLAG UND FEUER

1. Die Geräte enthalten keine Bauteile, die außerhalb des Avaya Servicezentrums gewartet

oder repariert werden können. Die Wartung darf NUR von qualifiziertem, technischem

Personal durchgeführt werden.

2. NIEMALS ein beschädigtes Gerät einschalten, oder versuchen es zu bedienen.

3. Vergewissern Sie sich, dass die Chassis Ventilationsöffnungen des Gerätes NICHT

BLOCKIERT sind.

Preface Safety Instructions

4. Austauschen einer durchgebrannten Sicherung NUR mit der gleichen Sorte und

Belastbarkeit wie sie auf der Sicherheitsaufschrift markiert ist. Die Aufschrift befindet sich

neben der Stromzufuhr wo sich auch der Sicherungskasten befindet.

5. Bedienen Sie das Gerät NICHT an einer Stelle an der die Umgebungstemperatur 50ºC

übersteigt.

6. Ziehen Sie das Netzkabel raus, BEVOR Sie versuchen die Hauptsicherung zu kontrollieren

oder auszutauschen.

2 P117F(R) Stackable Switch Installation Guide

Chapter 1

Overview

This guide is divided into four main sections:

• Overview: A general description of the features of the Avaya Stackable Switch

and P117FR (jointly referred to as the P117F(R)).

• Installation: Instructions for getting the P117F(R) Stackable Switch and P110

stack up and running.

• Software Download: Step-by-step guide to downloading a new software

version to the P117F(R) Stackable Switch on-board agent

• Appendix: Pin Assignments for the console RJ45 connector.

Description

The P117F(R) is part of the P110 Switching System family of switches. The P110

family is composed of high-performance switches which may be used singly or

stacked in any combination to make up a multi-protocol, non-blocking, scalable

switch.

The P117F has 16 Ethernet (10BASE-T) ports and one 155 Mbps ATM port.

The P117FR has an additional ATM port for redundancy. The 10 Mbps ports are

typically used for workgroup connectivity, while the ATM port(s) can be used as

an uplink to an ATM backbone.

The P117F(R) can operate standalone or as part of a stack. A stack can be made up

of any combination of two, three or four P110 switches, and up to 32,000 MAC

addresses per stack are supported. A stack requires a P110 NMA to link the

switches. The units are physically linked using the P110 Exoplane, which makes

up a multi-gigabit, non-blocking backplane.

The P117F(R) can use Avaya automatic fairness mechanism on the Ethernet ports

to ensure that all ports gain fair access to the P110 Exoplane even at very high

network utilization. Congestion management works both on full and half duplex

ports, and ensures no packet loss should the buffers become saturated during peak

load conditions. A backup power supply (P110 BUPS) can be used for increased

fault tolerance.

P110 switches are fully manageable using MSNM, the Avaya SNMP-based

management system (or CajunView), and may be monitored using the SMON

Manager Switch Monitoring Application.

P117F(R) Stackable Switch Installation Guide 3

Chapter 1 Description

4P117F(R) Stackable Switch Installation Guide

Chapter 2

Installation

Setting the DIP switches

First, set the DIP switches. The position of the switches depends on the application.

The drawing below shows the default positions of the DIP switches on the rear

panel of the P110 switch.

Figure 1 The P117F(R) Stackable Switch Rear Panel Showing the

DIP Switches in their Default Positions

• LSV – Last SW Version: The on-board agent of the P117F(R) can use either the

latest downloaded software or a “Basic” version. The Basic version is factory

loaded.

 Ensure the Use Switch is set to the OFF position.

Once you have set the DIP switch, you may proceed with the physical installation

of the switch.

Table 1 DIP Switches on the P117F(R) Stackable Switch

Switch Function OFF ON (Default)

LSV Last SW Version Use the “Basic”

software

version. This is

known as

Bank A

Use the latest

downloaded

agent software.

This is known

as Bank B

USE SWITCH Not applicable, for future use only

P117F(R) Stackable Switch Installation Guide 5

Chapter 2 Installation

Installing the P117F(R) Stackable Switch

The procedure for getting the P117F(R) Stackable Switch up and running depends

on whether the switch is to operate in standalone or as part of a stack.

Standalone Operation - Plug ‘n’ Play

Getting the P110 switch working is quick and easy:

1. Connect the power cable to the switch,

2. Connect the cables to the front panel ports,

The switch is now fully operational.

To ensure proper ventilation, ensure that the P110 NMA slot is closed.

Keep the P110 Exoplane cables that came with the P110 switch in a safe place. You

will need them when you add another switch to the P110 stack.

The P117F(R) contains an on-board agent. The Software Download section on page

13 explains when you need to upgrade the on-board software to a higher version.

Stacking Operation

Before beginning to operate with the P117F(R) you need to allocate it an IP

address. Please refer to Agent Access Address on page 22.

To make the P117F(R) work as part of a stack the P110 NMA with the correct

software version is required. See the P117F(R) Stackable Switch Release Notes for

the required version. Also the on-board agent must have the same agent version

number as the P110 NMA.

To check what software version you have, see the agent configuration window in

CajunView (on UNIX) or MSNM or CajunView Manager (on Windows), or see the

setup main menu of the P110 NMA.

1. Turn off the main power to the stack, by individually switching off each

switch.

2. Place the P110 NMA in the top switch of the stack if it is not already there.

3. If the P110 NMA and P117F(R) on-board agent contain the latest software

version, go to step 4.

If the P110 NMA does not contain the latest software version, you have to

perform software download of the latest version. The software is on the

diskette that came with the P117F(R). Download is performed via the Software

Update Manager in MSNM or in CajunView or via TFTP using a terminal –

details can be found in the P110 NMA Installation Guide. (The download

procedure itself is the same as that described in Software Download on

page 18 of this document).

If the P117F(R) on-board agent does not contain the latest version, perform the

download as described in Software Download to the On-Board Agent on

page 13.

6P117F(R) Stackable Switch Installation Guide

Chapter 2 Installation

4. Place the P117F(R) or other P110 switches in the stack. The P110 NMA must be

in the top switch of the stack.

To ensure proper ventilation, ensure that all empty P110 NMA slots in the

stack are closed.

5. Connect P110 switches using the supplied P110 Exoplane cables, as shown in

Figure 2. A switch connects to its upper neighbor through two Exoplane

cables, and to its lower neighbor through another two Exoplane cables. Make

sure you securely fasten the cables to the connectors.

Cabling Requirements:

• For correct operation, the P110 Exoplane must be fully connected, with all

units powered up. In a stack configuration, the P110 NMA must be installed

and connected to the P110 Exoplane.

Failure to observe this requirement will cause the P110 units to block all traffic

on attached stations and segments.

• When using the P114T or P114F in the stack, make sure all switches in the

stack are connected using P110 Exoplane cables (part number 108362203, with

white connectors and marked C/S:B) of the type supplied with the new P110

switch. Extra cables can be ordered from your local Avaya representative.

Figure 2 Rear view of a P110 stack, showing how the switches are linked via the P110

Exoplane cables. A P110 NMA resides in the uppermost switch.

6. Two terminators are supplied with the P110 NMA. Insert the two terminators

into the lowest two connectors at the bottom of the stack, as shown in Figure 2.

7. Turn on the mains power to the stack, by individually switching on each

switch.

8. Connect the cables to the front panel ports.

P117F(R) Stackable Switch Installation Guide 7

Chapter 2 Installation

 The P110 NMA and the on-board agent in all P110 switches (e.g., P117F(R) and

P113F) must have the same version number.

8P117F(R) Stackable Switch Installation Guide

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Avaya Router di rete

Avaya

Avaya 8000 Series Manuale utente

Avaya

Avaya ERS 8800 Manuale utente

Avaya

Avaya 8600 Guida rapida

Avaya

Avaya 5900 Series Manuale di istruzioni

Avaya

Avaya 5600 Series Manuale utente

Avaya

Avaya 8600 Manuale utente

Avaya

Avaya AG 2330 Manuale utente

Avaya

Avaya NN48500-598 Manuale utente

Avaya

Avaya 8800 Series Manuale utente

Avaya

Avaya 3500 series Manuale utente

Avaya

Avaya ERS 3500 Series Manuale utente

Avaya

Avaya ERS 5510 Manuale utente

Avaya

Avaya 8300 Series Guida rapida

Avaya

Avaya 2000 series Manuale utente

Avaya

Avaya 59100 Series Manuale utente

Avaya

Avaya 8600 Manuale utente

Avaya

Avaya ERS 4500 Manuale utente

Avaya

Avaya P333R-LB Manuale dell'operatore

Avaya

Avaya 1000 Series Manuale utente

Avaya

Avaya Secure Router 4134 Manuale utente

Avaya

Avaya 9000 Series Manuale utente

Avaya

Avaya ERS 1600 Manuale utente

Avaya

Avaya 100 Series Guida utente

Avaya

Avaya P134G2 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza