Avaya 3500 series Manuale di istruzioni

Installing Avaya Ethernet Routing Switch

3500 Series (NN47203-303 ver 01.01)

How to get help

To access the complete range of services and support that Avaya provides, go to

www.avaya.com.

You can also go to www.avaya.com/support to access the following pages:

• technical documentation

• product training

• technical support

If you purchased a service contract for your Avaya product from a distributor or authorized

reseller and you need assistance, contact the technical support staff for that distributor or

reseller.

Notices and alerts

Notice paragraphs alert you about issues that require your attention.

Following are descriptions of the types of notices used in this document.

Note:

Notes provide tips and useful information regarding the installation and operation of Avaya

products.

February 2013 1

Electrostatic alert:

ESD notices provide information about how to avoid discharge of static electricity and

subsequent damage to Avaya products.

Caution:

Caution notices provide information about how to avoid possible service disruption or

damage to Avaya products.

Warning:

Warning notices provide information about how to avoid personal injury when working with

Avaya products.

Voltage:

Danger—High Voltage notices provide information about how to avoid a situation or

condition that can cause serious personal injury or death from high voltage or electric

shock.

Danger:

Danger notices provide information about how to avoid a situation or condition that can

cause serious personal injury or death.

Safety messages

Safety messages are an important part of the technical documentation. The messages alert

you to hazards to personnel and equipment and provide guidance for the safe operation of

yourequipment.Failuretocomplywiththesafetymessagescouldresultinequipmentdamage

and personal injury.

Following are the most common types of safety messages.

Warning:

Installation must be performed by qualified personnel only. Read and follow all warning

notices and instructions marked on the product or included in the documentation.

Voltage:

This equipment relies on the building's installation for overcurrent protection. Ensure that a

fuse or circuit breaker no larger than 120 VAC, 15 A U.S. (240 VAC, 16 A International) is

used on the phase conductors.

Caution:

This device is a Class A product. In a domestic environment, this device can cause radio

interference, in which case the user may be required to take appropriate measures.

Safety messages

2 February 2013

Caution:

When mounting this device in a rack, do not stack units directly on top of one another in the

rack. Each unit must be secured to the rack with appropriate mounting brackets. Mounting

brackets are not designed to support multiple units.

Voltage:

Use only power cords that have a grounding path. Without a proper ground, a person who

touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to

the switch can result in excessive emissions.

Warning:

Disconnectingthepowercordis theonlyway toturnoffpowertothisdevice.Alwaysconnect

the power cord in a location that can be reached quickly and safely in case of an

emergency.

Warning:

Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look

into an optical fiber or connector port. Always assume that fiber optic cables are connected

to a light source.

Installation preparation

Related topics:

Before you begin on page 4

Installing the ERS 3510GT or ERS 3510GT-PWR+ switch on a table or shelf on page 4

Installing two ERS 3510GT or ERS 3510GT-PWR+ switches in an equipment rack on

page 6

Installing a single ERS 3510GT or ERS 3510GT-PWR+ switch in an equipment rack on

page 10

Installing the ERS 3524GT, ERS 3524GT-PWR+, ERS 3526T, or ERS 3526T-PWR+ switch

in an equipment rack on page 14

Connecting AC power on page 15

Installation preparation

February 2013 3

Before you begin

Ensure the area where you install and use the switch meets environmental requirements.

You can install a single ERS 3510GT or ERS 3510GT-PWR+ switch on any flat surface that

can safely support the weight of the switch and attached cables. An ERS 3510GT switch

weighs 3.85 lb (1.75 kg). An ERS 3510GT-PWR+ switch weighs 5.9 lb (2.70 kg). Cable weight

varies for each installation.

You can install two ERS 3510GT or ERS 3510GT-PWR+ units together to form one standard

width rack-wide system using a 19 inch side-by-side Rack Mount Kit (ordered separately).

You can install the ERS 3524GT, ERS 3524GT-PWR+, ERS 3526T, or ERS 3526T-PWR+

switches in an equipment rack using the brackets provided.

Environmental requirements

The following list describes the requirements for the switch environment.

• ambient temperature between 32°F and 122°F (0°C and 50°C)

• relative humidity between 0% and 95% noncondensing

• no nearby heat sources such as hot air vents or direct sunlight

• no nearby sources of severe electromagnetic noise

• no excessive dust

• adequate power source within six feet; one circuit required for each power supply

• at least 2 inches (5.1 cm) (or one vertical rack width) on all sides of the switch unit for

ventilation

• adequate space at the front and rear of the switch for access to cables

If you are installing a single Ethernet Routing Switch 3524GT, 3524GT-PWR+, 3526T, or

3526T-PWR+ on a table or shelf, ensure the surface can support at least 7 to 10 pounds (3 to

4.5 kilograms) .

Installing the ERS 3510GT or ERS 3510GT-PWR+ switch on a table

or shelf

About this task

You can install a single ERS 3510GT or ERS 3510GT-PWR+ switch on any flat surface that

can safely support the weight of the switch and attached cables. An ERS 3510GT switch

weighs 3.85 lb (1.75 kg). An ERS 3510GT-PWR+ switch weighs 5.9 lb (2.70 kg). Cable weight

varies for each installation.

Installation preparation

4 February 2013

Hardware included with ERS 3510GT and ERS 3510GT-PWR+ model switches:

•Avaya Ethernet Routing Switch 3500 Series

• Rubber footpads

• AC power cord (Note: a power cord is not included for the A variant of the switch)

• Base Software License Kit

• Screws (2) and wall anchors (2) for wall mounting

The following procedure provides instructions for installing the switch on a table or shelf.

Important:

Allow at least 2 inches (5.1 cm) on each side of the switch for proper ventilation and at least

5 inches (12.7 cm) at the back of the switch for power cord clearance.

Procedure

1. Attach the rubber feet at the marked locations.

2. Set the switch on a table or shelf.

Installation preparation

February 2013 5

Installing two ERS 3510GT or ERS 3510GT-PWR+ switches in an

equipment rack

Before you begin

Hardware included (in each box) with ERS 3510GT and ERS 3510GT-PWR+ model

switches :

• Avaya Ethernet Routing Switch 3500 Series

• Rubber footpads

• AC power cord (Note: a power cord is not included for the A variant of the switch)

• Base Software License Kit

• Screws (2) and wall anchors (2) for wall mounting

Tool requirements

• a Phillips screwdriver to attach brackets to the switch and the switch to the rack.

Bracket requirements

• one 3510–Pair Rack Mount Kit — this accessory kit is used to connect two ERS 3510GT

switches together side-by-side.. The kit includes all necessary brackets and fasteners and

must be ordered separately (Order Code AL3511002–E6).

The contents of the Side-by-Side Rack Mount Kit are as described below:

- 1. Rack mount brackets — Quantity: 2

- 2. M4 flat head screws — Quantity: 14

- 3. Hinged mating bracket — Quantity: 1

- 4. Rear bracket for mating identical 3510 switches — Quantity: 1

Installation preparation

6 February 2013

- 5. Rear bracket for mating 3510GT and 3510GT-PWR+ switches — Quantity: 1

-#10–32 rack mounting screws (not shown) — Quantity: 4

- #12–24 rack mounting screws (not shown) — Quantity: 4

- M6 rack mounting screws (not shown) — Quantity: 4

Rack requirements

• provide the equivalent of one rack of vertical space for each switch in an E1A or 1EC

standard 19 inch (48.2 cm) equipment rack and T1A 23 inch (58.5 cm) equipment rack.

• appropriate rack space to accommodate 1U switch height (44 mm).

• rack bolted to floor and braced if necessary

•rack must be grounded to the same grounding electrode used by the power service in the

area. The group path must be permanent and must not exceed 1 Ohm of resistance from

the rack to the grounding electrode.

Installation preparation

February 2013 7

Perform the following procedure to install your switch in an equipment rack.

Note:

Whenmountingtwo3510GT-PWR+unitssidebysideinanequipmentrack,runtheswitches

in high power mode to ensure adequate airflow. In high power mode, the available power is

170 Watts.

#show poe-main-status

PoE Main Status - Stand-alone

-------------------------------------------------

Power Mode : High Power Budget

Available DTE Power : 170 Watts

DTE Power Status : Normal

DTE Power Consumption : 0 Watts

DTE Power Usage Threshold : 80%

PD Detect Type : 802.3af and Legacy

Power Source Present : AC Only

AC Power Status : Present

DC Power Status : Not Present

Procedure

1. Ensure power is disconnected from the switch.

2. Connect the two ERS 3510GT switches together by opening the hinged bracket to

90° and attaching it to each ERS 3510GT switch with three M4 flat head screws

(included), as shown below.

Installation preparation

8 February 2013

3. Attach the standard rack mount bracket ears to the outer end of each switch as

shown below.

4. Once the switches are joined together, fold the hinged bracket inward.

5. Perform one of the following

•To connect two ERS 3510GT or two 3510GT-PWR+ switches together use

the rear bracket as shown below, with four M4 pan head screws to secure the

switches at the rear. Once the rear bracket has been installed, the switches

can be installed in the rack.

•To connect one ERS 3510GT switch and one ERS 3510GT-PWR+ switch

together use the offset rear bracket with four M4 pan head screws to join the

switches at the rear. Once the rear bracket has been installed, the switches

can be installed in the rack.

Note:

If you are mounting a mix of ERS 3510GT and ERS 3510GT-PWR+ units side

by side, ensure that the ERS 3510GT unit is mounted on the LEFT side (when

viewed from the front) for adequate airflow.

Installation preparation

February 2013 9

6. Slide the switches into the rack. Insert and tighten the rack mount screws.

7. Verify that the switch is securely fastened to the rack.

Installing a single ERS 3510GT or ERS 3510GT-PWR+ switch in an

equipment rack

Before you begin

Hardware included with ERS 3510GT and ERS 3510GT-PWR+ model switches:

• Avaya Ethernet Routing Switch 3500 Series

• Rubber footpads

• AC power cord (Note: a power cord is not included for the A variant of the switch)

• Base Software License Kit

• Screws (2) and wall anchors (2) for wall mounting

Tool requirements:

• a Phillips screwdriver to attach brackets to the switch and the switch to the rack

Bracket requirements:

•one3510–Single RackMountKit —thisaccessory kitisused tomounta singleERS3510GT

or ERS 3510GT-PWR+ switch in a standard 19 inch rack. The kit contains the necessary

Installation preparation

10 February 2013

Altri manuali per 3500 series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Avaya Interruttore

Avaya

Avaya P120 SMON Manuale utente

Avaya

Avaya 8300 Series Istruzioni per l’uso

Avaya

Avaya 5000 Series Istruzioni operative

Avaya

Avaya Virtual Services Platform 9000 Series Manuale utente

Avaya

Avaya C360 Manager Istruzioni operative e di manutenzione

Avaya

Avaya Cajun P333T Manuale utente

Avaya

Avaya 4800 Series Manuale di istruzioni

Avaya

Avaya Scopia XT5000 Manuale utente

Avaya

Avaya M15-155 Manuale utente

Avaya

Avaya ERS 3500 Series Manuale utente

Avaya

Avaya VSP 4000 4450GTX-HT-PWR+ Manuale utente

Avaya

Avaya 5900 Series Manuale utente

Avaya

Avaya 3500 series Manuale utente

Avaya

Avaya P334T-ML Manuale dell'operatore

Avaya

Avaya 8800 Series Manuale utente

Avaya

Avaya ERS 3500 Series Manuale del proprietario

Avaya

Avaya 4000 Series Istruzioni operative originali

Avaya

Avaya Virtual Services Platform 7000 Series Istruzioni operative

Avaya

Avaya VSP 7000 Series Manuale di istruzioni

Avaya

Avaya VSP 4450GSX-PWR+ Manuale di istruzioni

Avaya

Avaya P332G-ML Manuale dell'operatore

Avaya

Avaya 8800 Series Guida rapida

Avaya

Avaya P114T Manuale utente

Avaya

Avaya 4550T-PWR+ Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente