AVer CAM520 Pro Manuale utente



CAM520 Pro Camera

Quick Installation Guide

Package Contents

Camera unit

(Basic/Advanced model*) Remote controller Power Adapter

Power plug USB 3.0 Cable

RS232 cable**

(DIN 9 to DIN8) HDMI cable** L-Mount

Bracket

Screws for

mount Drilling paper



  

Quick Guide Warranty card AAA Batteries





* Advanced model supports HDMI port, DIP switch, and PoE+ function.

** Only support for advanced model.

More Help

For FAQs, technical support, software and user manual download, please visit:

http://www.averusa.com

Overview

2 3 4 5 6 7 8 9



1 Status LED 4 HDMI port

7 DC 12V power plug

2 IR sensor 5 USB3.1 Type B port 8 Ethernet port

3 DIP switch

6 RS232 in/out port 9 Kensington Lock

1: Only support for advanced model.

2: Advanced mode supports PoE+.

Remote Controller

Camera select

Camera Directional

control

OSD Menu

SmartFrame

Zoom In/Out

Preset

Call/Answer*

Brightness -

Enter**

Mute/Un-mute**

VolumeUp/Down

PresetHotkey

PresetPosition

Hangup*

Brightness+

*Function requires AVer PTZApp

**Not support for CAM520 Pro

1: If you only have one

camera and don’t need to do

any setting, the default is

camera 1. If you press

camera 2 or 3 on the remote

control, you will find your

remote can’t control your

camera. In this case, please

press camera 1 on your

remoter again.

2: Only available for

advanced model.

3: Press for 1 second can

switch the SmartFrame

function between auto and

manual

Press and hold the number

button “ ” can turn on or

off the WDR function.

AAA Batteries (required)



Installation

1. Connect the camera to power outlet.

Power cord

2. Connect the necessary cables.

[Note]

USB and RS232 cable need to secure the

cable with attached screw.

Make sure the cable is well connected to the

connector on the camera before securing

the cable.

3. Connect the camera to the computer.

[Note] Use the USB 3.0 cable that is included in

package.

USB cable



Wall Mount Installation

[Note] 1. In step 3, do not tight the screw when secure the camera on the wall mount bracket.

2. In step 5, secure tight the both screws to secure the camera on the wall mount bracket.

140.0mm(5.51")

58.0mm(2.28")

4-ø5.5mm(ø0.22")

1 2 3

4 5 6

Celling Mount

[Note] 1. In step 3, do not tight the screw when secure the camera on the wall mount bracket.

2. In step 5, secure tight the both screws to secure the camera on the wall mount bracket.

3 4



Making a Video Call

A computer is required to use this device.

Step 1: Open your video collaboration application such as Zoom, Microsoft®Teams, Skype for

Business, Skype, Google Hangouts, Intel® Unite™, RingCentral, BlueJeans, V-Cube, LiveOn,

CyberLink U Meeting®, TrueConf, Adobe Connect, Cisco WebEx®, Fuze, GoToMeeting™, Microsoft®

Lync™, Vidyo, vMix, WebRTC, Wirecast, XSplit.

Step 2: Set the CAM520 Pro as your primary camera device in your application (Please consult your

application setup guide for details).

Step 3: Ready to make a video call.

[Note] CAM520 Pro is a Plug-n-Play Conference Camera. The system requires no special drivers. For

advanced setting and firmware update, please download AVer PTZApp.

Setup the Camera through the Web Browser

CAM520 Pro has an Ethernet port for IP streaming and allows administrators to remotely control and

set up the camera via an internet access. Moreover, CAM520 Pro also supports RTSP and RTMP

functions. For more details, please refer to user’s manual or contact our technical support.

1. Make sure the CAM520 Pro has an internet access connection.

2. Open the browser and enter the IP address of the camera.

3. The camera default IP address is 192.168.1.168. User can use “AVer IP Finder” app to find the

camera (Please refer to “Using AVer IP Finder to Find the Camera” section).

4. When login screen is shown, enter the password (default password is aver4321).

5. The web main screen is displayed.



Using AVer IP Finder to find the Camera

To find the IP address of your cameras, you can use the AVer IP Finder application. Follow the below

steps to find the IP address of camera.

1. Download the IP Finder from http://www.aver.com/download-center .

2. Run the IP Finder.

3. Click “Search”, and all available devices will be listed on the screen.

4. Select a camera from the list. The corresponding fields of IP address will display.

5. To change the IP address of camera, user can select “DHCP” or “Static IP”.

The DHCP should get the IP address from local dynamic IP sever. The static IP, user can enter the

specific IP address. Click “Apply” to apply the setting to the camera. The login password is

required(default password is aver4321).

6. Click “Search” button to re-scan the camera.

7. Double-click on the IP address of camera from the list can connect to camera through the browser.

[Note] If IP Finder cannot find the camera, please check following:

Please make sure the Ethernet connection of camera is well connected.

The camera and PC (IP Finder) are in the same LAN segment.



Install AVer PTZApp

In AVer PTZApp, user can configure the parameters of the camera.

Please go to http://www.aver.com/download-center to download the AVer PTZApp. After downloading,

double-click on the file and follow the on-screen instructions to complete the installation.

Use AVer PTZApp

1. After installing the AVer PTZApp, double-click on the

AVer PTZApp icon to run the application.

2. During your video call, you can use the AVer

PTZApp to pan, tilt and zoom the camera in/out and

enable/disable the backlight feature, set up camera

Home or Sleep mode preset points. For more

details, please refer to the user manual.

3. Tracking mode: It is SmartFrame function which

can auto detect faces of people to find the best view

for all meeting participants. Users can change

SmartFrame function status in AVer PTZApp. In

AVer PTZApp, select “Settings” > “Tracking mode”

> “Auto frame/Manual frame/off”.

Also, pressing on the remote for 1 second

can switch the SmartFrame function between auto

and manual; a message (as figure shown) will

display on the screen to indicate in auto or manual

status.

[Note] While in conferencing meeting, participants

must face the camera for face detection

(SmartFrame).

4. Flip: If the camera is installed in the upside down

position, please enable the "Flip" function in the

AVer PTZApp, and the screen will display normally.



5. Hotkey Control: Enable hotkey control to use keyboard control camera’s movement and

backlight. The default is off.



A hotkey tip will display when mouse is moved to

the PTZ control button in PTZ mode.

If the hotkey function is enabled after installed

PTZApp, PTZApp auto launch next time while PC

reboot. Therefore, the customer can use all the

hotkey commands since PTZApp is auto running in

system tray.



Contact Information

AVer Information Inc.

668 Mission Ct

Fremont, CA 94539

www.averusa.com

Toll-free: 1(877)528-7824

Local: 1(408)263-3828

support.usa@aver.com

Federal Communication Commission Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference

when the equipment is operate din a commercial environment. This equipment generates, uses, and can radiate

radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:

This is a class A product. In a domestic environment this product may cause radio interference in which case the user

may be required to take adequate measures.

CAUTION

- Risk of explosion if battery is replaced by an incorrect type.

- Dispose of used batteries in a safe and proper manner.

Altri manuali per CAM520 Pro

Indice

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente

Digitus

Digitus DN-16085-1 Manuale utente