Avipas SWIT-AV-1362 Manuale utente
Model: AV-1362
H.264 HD Video Conferencing Camera
User Manual
V1.1
Please Read this User Manual throughout before using.
www.avipas.com
Attentions
Electric Safety
Installation and operation must accord with electric safety standard
Caution to transport
Avoid stress,vibration and soakage in transport,storage and installation.
Polarity of power supply
The power supply of the product is ±12V,the max electrical current is 2A .Polarity of the power supply
drawing.
Careful of installation
Never move the camera by seizing the camera head. Don’t rotate camera head by hand;
otherwise,mechanical trouble will occur.
This series item must put on the smooth desk or platform,and it can not be installed slant ways;
If the camera is installed on TV or computer,the base can be fixed by four double-sided adhesive trays.
Don’t apply in corrosive liquid,gas or solid environment to avoid the cover which is made up of organic
material.
2
To make sure no obstacle in rotation range.
Never power on before installation is completed.
Don’t disassemble discretionarily.
We are not responsible for any unauthorized modification or dismantling.
Attention
Electromagnetic filed under certain rate may affect camera image!
3
Warranty
Thank you for your interest in the products of AVIPAS Inc.
This Limited Warranty applies to HD Conference Camera purchased fromAVIPAS Inc.
This Limited Warranty covers any defects in material under normal use during the Warranty Period. During the
Warranty Period, AVIPAS Inc. will repair or replace, at no charge and products that proves defective because of
improper material, under normal use and maintenance.
The Warranty Period for HD Conference Camera purchased from AVIPAS Inc. is Two year from the date of
purchase.
This Limited Warranty does not cover any problem that is caused by:
conditions, malfunctions or damage not resulting from defects in material
To obtain warranty service, you must first contact us to determine the problem and the most appropriate solution for
you.
Contact Details:
AViPAS Inc.
Address: 3350 Scott Blvd 61-02
Santa Clara, CA 95054
Phone:
1-844-228-4727
Fax:
(408) 228-8438
Email:
Website: http://www.avipas.com
4
5
Content
1. Fast Installation.........................................................................................................................................................6
1.1 Camera Interface Explanation ........................................................................................................................6
1.2 Power on Initial Configuration.......................................................................................................................7
1.3 Video output....................................................................................................................................................7
1.4 BRACKET MOUNTING...............................................................................................................................8
2. Product overview....................................................................................................................................................11
2.1 Product introduction .....................................................................................................................................11
2.2 Main Features ...............................................................................................................................................13
2.3 Technical specification..................................................................................................................................15
2.4 Interface instruction......................................................................................................................................17
3. Application Instruction ...........................................................................................................................................21
3.1 Video Output.................................................................................................................................................21
3.2 Remote controller .........................................................................................................................................23
3.3 MENU SETTING.........................................................................................................................................27
4. Network Connection...............................................................................................................................................36
4.1 Connecting Mode..........................................................................................................................................36
4.2 IE Log In.......................................................................................................................................................39
5. Serial Communication Control...............................................................................................................................51
5.1 VISCA protocol list ......................................................................................................................................51
5.2,Pelco-D protocol command list ....................................................................................................................60
5.3 Pelco-P protocol command list.....................................................................................................................61
6. Camera Maintenance and Troubleshooting ............................................................................................................62
6.1 Camera Maintenance....................................................................................................................................62
7
Figure 1.1. AV-1362 series
1. Camera lens
2. Camera base
3. Remote Controller Receiver light
4. Bottom DIP switch
5. Tripod screw hole
6. Installation Orientation Hole
7. RS232 control interface (input )
8. 10/100M Network interface
9. DVI-I interface(including HDMI signal)
10. USB3.0 interface
11. DC12V Input Power Supply Socket
12. Power indicator
1.2 Power on Initial Configuration
1) Power on: connect DC12V power supply adapter with NO.11 in Figure1.1.
2) Initial configuration: Power on with power indicator light on and remote control receiver light
blinking,camera head moves from bottom left to the bottom,and then go to the HOME position
(intermediate position of both horizontal and vertical ),while the camera module stretches. When remote
control receiver light stops blinking,the self-checking is finished.
Note: If you set preset 0,when Power on initial configuration is completed,the camera automatically
moves to the preset 0 position.
1.3 Video output
AV1362 video output : LAN,DVI (HDMI),USB3.0 and USB3.0 is compatible with USB2.0.
8
1) video output from LAN
a. Network cable connection port: AV-1362--No. 8 in Figure1.1.
b. Webpage Login: open your browser and enter 192.168.5.163 in the address bar (factory default);
press Enter to enter into the login page; click on the “player is not installed,please download and
install!" and follow the installation steps for installation. Then enter the user name admin and
password admin (factory default); press Enter to enter into the preview page,users can carry out PTZ
control,video recording,playback,configuration and other operations.
2) DVI(HDMI) video output
a. DVI video cable connection: No. 9 in Figure1.1.
b. Connect the camera and the monitor via DVI video cable; video output is available after camera initial
configuration.
3) USB3.0 video output
a. USB3.0 video cable connection: NO.10 in figure1.1.
b. Connect the camera and the monitor via USB3.0 video cable,open video display software,select
image device,and then video output will be available.
4) USB3.0 compatible with USB2.0 output
a. USB3.0 video cable connection: NO.10 in Figure1.1.
b. Connect the camera and the monitor via USB3.0 video cable,open video display software,select
image device,and then video output will be available.
1.4 BRACKET MOUNTING
1) Bracket installation steps
9
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Avipas Telecamera IP
Avipas
Avipas AV-1250 Manuale utente
Avipas
Avipas AV-1330 Manuale utente
Avipas
Avipas AV-1360 Manuale utente
Avipas
Avipas AV-1080 Manuale utente
Avipas
Avipas AV-1361 Manuale utente
Avipas
Avipas AV-1160 Manuale utente
Avipas
Avipas AV-105 Manuale utente
Avipas
Avipas AV-1360 Manuale utente
Avipas
Avipas AV-1161 Manuale utente
Avipas
Avipas AV-1563 Manuale utente
