Avision AV810C Manuale utente
User’s Manual
For AV810C/AV815C/AV820C/AV880C
Document Imaging Scanner
Doc. No.250-0070-03 Rev. C
Avision Inc.
ii
Trademarks
Microsoft is a U.S. registered trademark of Microsoft Corporation.
Windows and MS-DOS are trademarks of Microsoft Corporation.
IBM, PC, AT, XT are registered trademarks of International Business
Machines Corp.
Other brands and product names herein are trademarks or registered
trademarks of their respective holders.
Copyright
All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by
anymeans, electronic, mechanical, magnetic, optical, chemical,
manual, or otherwise, without the prior written permission of Avision
Inc.
Material scanned by this product may be protected by governmental
laws and other regulations, such as copyright laws, the customer is
solely responsible for complying with all such laws and regulations.
iii
Warranty
The information contained in this document is subject to change
without notice.
Avision makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of fitness for a
particular purpose.
Avision shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
iv
FCC Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communication. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, (example - use
only shield interface cables when connecting to computer or
peripheral devices). Any changes or modifications not expressly
approved by the manufacture of this device could void the user's
authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Responsible
Party: Avision Labs, Inc.
Telephone No.: +1 (510) 739-2369
v
Table of Contents
1. INTRODUCTION ................................................................... 1-1
2. SCANNER INSTALLATION................................................... 2-1
2.1 PRECAUTIONS ............................................................... 2-1
2.2 SCANNER UNPACKING.................................................. 2-1
2.3 ADF PAPER CHUTE INSTALLATION ............................. 2-5
2.4DOCUMENT LOADING..................................................... 2-7
2.5 CONNECTING THE CABLES .......................................... 2-9
2.6 INSTALLATION OF THE SCSI CARD.............................2-11
2.6.1 PC USERS.............................................................2-11
2.6.2 MAC USER............................................................2-12
3. SCANNER DRIVER INSTALLATION .................................... 3-1
3.1 MAC USERS.................................................................... 3-1
3.2 PC USERS....................................................................... 3-4
3.2.1 WINDOWS 3.1 OR WINDOWS 3.1X...................... 3-4
3.2.2 WINDOWS 95 OR WINDOWS NT4.0..................... 3-5
4. SCANNER OPERATION ....................................................... 4-1
4.1 IMAGE TYPE................................................................... 4-5
4.2 RESOLUTION CONTROL................................................ 4-7
4.3 IMAGE CONTROL ........................................................... 4-8
4.4 SCANNING .....................................................................4-13
5. CARE AND MAINTENANCE.................................................. 5-1
5.1 CLEANING THE ADF....................................................... 5-1
5.2 CLEANING THE GLASS.................................................. 5-3
5.3 REPLACING THE ADF DETACHABLE PAD MODULE.... 5-4
6. TROUBLESHOOTING........................................................... 6-1
6.1 FREQUENTLY ASKED QUESTIONS............................... 6-1
6.2 PAPERJAM IN THE ADF ................................................. 6-4
6.3 TECHNICAL SERVICE..................................................... 6-6
7. SPECIFICATIONS................................................................. 7-1
7.1 MODEL: DOCUMENT SCANNERS................................. 7-2
1-1
1. INTRODUCTION
Congratulations on your purchase of the Avision document scanner.
Avision is one of the leading company to make high quality document
scanner.
To ensure the optimum performance of the scanner, please take a
few minutes to read through this manual before you install and
operate the new scanner. The manual contains important
information on how to unpack, install, operate, and maintain the
scanner properly. Figure 2-1 in below shows how the scanner is
packed. Please check if all items are included.
1-2
Figure 1-1 Scanner Packaging
1. Scanner main unit
2. Cushion
3. Users manual, Software CD
4. SCSI host adapter
5. SCSI cable
6. Power adapter
7. Output paper rack
8. Carton
2
1
2
3
7
8
4
5
6
2
2-1
2. SCANNER INSTALLATION
2.1 PRECAUTIONS
v Keep the scanner out of direct sunlight. Direct exposure to
the sun or excessive heat may cause damage to the unit.
v Do not install the scanner in a humid or dusty place.
v Be sure to use the proper AC power source.
v Place the scanner securely on an even, flat surface. Tilted or
uneven surfaces may cause mechanical or paper-feeding
problems.
v Keep the shipping box and the material in case you may need
to ship the scanner again.
2.2 SCANNER UNPACKING
Please unpack the scanner carefully. If any item is missing or
damaged, please contact your authorized Avision dealer
immediately.
Remove the shipping retainer:
1. Place the scanner on its side as shown to reveal the shipping
retainer as shown in Figure 2-1.
2. Unscrew the retainer screw.
3. Pull out the shipping retainer and put it in the “use position”(See
Figure 2-2) and secure it with the screw.
4. Lay down the scanner on the desk for normal operation.
2-2
Figure 2-1 Remove the shipping retainer.
Figure 2-2 Fasten the shipping retainer.
2-3
Refit the shipping retainer:
Whenever you need to transport the scanner, please follow the
instructions below:
1. Turn off the scanner.
2. Raise the document cover. You can see clearly the flatbed
glass as well as the reading engine.
3. Turn on the scanner. At this moment, the reading engine will
move a few inches forward and stay there for a few seconds.
Turn off the scanner during this pause.
4. Raise the scanner high enough to unscrew the shipping retainer
from the “use position” and fix it in the “shipping position.”
SCSI ID:
When you have several devices on a SCSI chain, you may need to
adjust the SCSI ID selector setting located on the back of the
scanner(See Figure 2-3). This setting assigns a specific "device ID"
to the scanner. If the ID number is duplicate with an existing SCSI
device, please select a new ID.
Note: The factory setting for the scanner is ID# 6. Usually, ID# 0 is
assigned to an internal hard disk drive, and ID# 7, to SCSI adapter or
host. ID# 8 and #9 are not in use actual.
Setting Terminator
The scanner is equipped with a built-in terminator switch on the rear
of the scanner. (See Figure 2-3) Turn the terminator switch on if
the scanner is to be connected to the computer as the only or the
last SCSI device. Turn the terminator switch off if the scanner is to
be located between the computer and other SCSI device.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Avision Scanner
Avision
Avision DT-1106B Manuale utente
Avision
Avision FF-2009B Manuale utente
Avision
Avision AD335F Manuale utente
Avision
Avision AV121 Manuale utente
Avision
Avision AD215 Manuale utente
Avision
Avision AV100C Manuale utente
Avision
Avision AVA3 Plus Manuale utente
Avision
Avision AN360 Manuale utente
Avision
Avision AD340GFN Manuale utente
Avision
Avision MiWand 2 Lite Manuale utente
Avision
Avision AD3100 Series Manuale utente
Avision
Avision AD8120P Manuale utente
Avision
Avision AD225 Manuale utente
Avision
Avision PaperAir Manuale utente
Avision
Avision BS-1306S Manuale utente
Avision
Avision NETDELIVER @V4800 Manuale utente
Avision
Avision BT-1604B Manuale utente
Avision
Avision AN240W Manuale utente
Avision
Avision BS-0801S Manuale utente
Avision
Avision PaperAir 215L Manuale utente
