Satin Finish Wireless Bluetooth® Headphones User Manual
Controls & Functions
1. Next track/volume up
Short-press to move to the next track and long-press to
increase the master volume. When the maximum volume
is reached, an audible tone can be heard.
2. Previous track/volume down
Short-press to go back a track and long-press to
decrease the master volume.
3. Play/pause/call answer
Short-press to play and pause the current track or to
answer an incoming call. When a call is received, a voice
will inform you of the telephone number. To accept the
call press once, to reject the call press twice.
4. Power/Pair button
Press and hold to turn on the headphones and enter
Bluetooth pairing mode. Once in pairing mode, the LED
indicator will flash alternating blue and red. Once you
have paired with your device, a voice message is heard
and the LED indicator will turn blue. If you are asked for
a pairing code, the device name is AV:LINK-SFBH1 and
the code is 0000.
5. LED Indicator
This will flash alternate red and blue for pairing mode,
flash blue for paired mode, solid red when charging or
flash red when the battery is low.
6. USB Charging port
Insert the USB cable provided to charge the unit. On first use please ensure you fully charge the
headphones. Whilst charging the LED will glow red and once it’s fully charged, it will go out. When the
power is low the LED will flash red, please recharge the unit at this point.
7. 3.5mm Jack port
Also provided with the unit is a 3.5mm jack cable, which can be used with the headphones by connecting
to any device with a 3.5mm socket.
8. Built-in microphone
Can be used to answer hands free calls when connected to a compatible device.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at
the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2017. AVSL Group Ltd.
