AVS AHDSW41 Manuale utente
Input Port
Output Port
Bandwidth
Output Resolution
Operating Temperature
Deep Color
Chassis
Dimension
Weight
SPECIFICATION
4x1 HDMI Switch
User Manual
4xHDMI(Female connector), 1xUSB
1xHDMI(Female connector), 1xIR Channel
10.2Gbps
480i~1080P@50/60,1080P@24/50/60,
2160P@24/30, VGA~UXGA
-15℃~55℃/5°F~131°F
36bit/48bit
Metal Shell
120mm(L)x60mm(W)x18mm(H)
200g
Full 3D Pass-through
Support IR Control
Ultra HD 4K X 2K
Danger Electric
Shock Risk
Keep Dry
Keep Away
from Heat
4.Stop using the unit during thunder or lightening storms.
5.Avoid the power cable being stepped on or pinched. Position the unit
carefully to avoid damage or accident.
6.Clean the unit only with dry cloth.
7.Only use accessories specified by the manufacturer.
8.Unplug the equipment when unused for a long period of time.
9.Do not try to open any non-serviceable parts. Contact your authorized
servicing center and personnel.
WARNING! This product contains small items that could be a choking
hazard if swallowed. Keep these items away from young children!
AV Supply Group (AVS) intend to make this manual accurate and complete.
However, AVS makes no claim that the information contained herein covers
all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice
or obligation of any kind. AVS makes no representation of warranty, expressed
or implied, regarding the information contained herein. AVS assumes no
responsibility for accuracy, completeness or sufficiency of the information
contained in this document.
Please read the following safety precautions carefully before you unpack
and install this equipment.
CAUTION: Do not use this product for any purpose not explicitly specified
by AVS. Improper installation may cause property damage or personal injury.
If you do not understand these directions, or have doubts about the safety of
the installation, contact AVS Customer Service or call a qualified contractor.
AVS is not responsible for damage or injury caused by incorrect mounting,
assembly, or use.
1.Do not expose the unit to rain, moisture or any other dripping liquids. And
keep it away from any wet locations such as fishing tanks, vases.
2.Do not install the unit close to fire or any other heat sources.
3.Keep the unit in dry and ventilated area. Do not install in bookcase,
cabinet or any other confined space.
SAFETY PRECAUTIONS
PANEL DESCRIPTIONINTRODUCTION
•1 x HDMI switch unit
•1 x Remote
•1 x 3ft USB A to micro B cable
•1 x User Manual
•HDCP 1.2 and DVI compliant
•Support full 3D pass-through
•Support 4k x 2k high resolution
•Support IR control
•Support CEC bypass
•Support DTS/Dolby/DTS-HD/Dolby True HD/LPCM7.1/AC3
FEATURES
PACKAGE CONTENTS
INSTALLATION
CONNECTION DIAGRAM
•Connect HDMI input ports to the HD signal source equipments such as
DVD player, Blue-ray player, Set-top box etc.
•Connect HDMI output port to the HDMI display.
•You can control the device using the supplied Remote by pointing
to the built-in IR sensor.
•Connect to the IR Ext output with the IR receiver cable (optional) if you
need to extend the distance of using the remote.
•Connect to the IR Ext output with the IR blaster cable (not included in the
package) for IR signal transmission. Place the IR blaster in direct line-of-
sight of the equipment to be controlled.
•Connect the IR receiver cable (not included in the package) for IR signal
reception. An adaptor is needed for connection. Make sure that the remote
being used is in direct line-of-sight of the IR receiver.
•In case your HDMI source could not provide sufficient power, you can
use the supplied USB cable and connect to your existing device for getting
power to the unit.
This super slim 4x1 HDMI switch offers you a great way to tidy up your
home theater. It allows you to connect up to 4 HD sources, and you can
switch the HD sources very conveniently by using the easy-click switch
button on the unit or the included IR remote. Furthermore, the bi-directional
IR control function enables to control your devices more conveniently.
The system is compatible with HDMI 1.4V, 3D and 4K ultra HD.
The switch does not need for power supply; however, if your HDMI source
could not provide sufficient power, then you can connect the switch to an
external power source using a micro USB cable(Not included).
Front Panel
Rear Panel
1 2
1 HDMI INPUT
2 HDMI OUTPUT
3 USB PORT
4 IR EXTENSION OUTPUT
5 BUILT-IN IR
6 HDMI INPUT LED
7 HDMI OUTPUT LED
8 SOURCE SELECTION BUTTON
45
Top Panel
16
4x1 HDMI Switch
INPUT 2 INPUT 3 INPUT 4 OUTPUT 5V/1A
3
7 8
INPUT 1 IR Ext IR 1 32 4 OUT SElECT
08：08 PLAY 06：08 PLAY 09：08 PLAY 08：08 PLAY
HDMI
SWITCH
4TO1
21
43
INPUT2 INPUT3 INPUT4 OUTPUT 5V/1A
INPUT1 IR Ext IR 1 32 4 OUTSElECT
Indice
