AVteq UM-2 Guida rapida
UM - 2
AB D
E F GH
IJK
L
O
N
M
C
P
Q
Q
1
O
Items included
M6X35
M6X12
Black Spacer
M8X16 M8X40
M10X50
Square spacer
M8 & M6
M5X12 M5X30
Iron Spacer
eft Monitor Bracket
Wall Plate (x1)
Concrete anchor
M8 X 50
M8 X 70 outside
the hexagonal
Right Monitor Bracket
ATTACHING THE GUSSET IN THE WALL PLATE
Spacer M10
Spacer M8
M4X12 M4X30
Gusset
nut 1/4 ''
Attach the gusset at the
wall plate with nuts (Q)
2
3
L
L
M/N
O
PO
NOTE:
When attaching the mounting
screws to the display, make
sure the direction of Brackets
is right and ensure that both
brackets are vertically aligned
Recesse mounting
holes.
If the mounting holes
are recessed into the
back of the display, use
the supplied spacers to
pack the recessed hole.
MOUNTING THE DISPLAY
BRACKETS
BACK OF
DISPLAY
MOUNTING THE WALL PLATE
Mansory Wall
Note: Ensure the Wall
Plate in mounted with
the folded tabs pointing
upwards
Timber Stud Wall
Note: Ensure the Wall
Plate in mounted with
the folded tabs pointing
upwards
OR
TIPS: Use a spirit level to ensure the Wall Plate is horizontal
Mounting screw
4
5
With the Brackets attached
to the display, lift the
display and hook the
brackets onto the Wall Plate
as shown.
ATTACHING THE DISPLAY TO
THE WALL PLATE
Note: This procedure will require two persons
Note: For demonstration purposes, the wall
has been omitted from the above images.
SECURITY OPTION
Note: For demonstration purposes, the wall has been
omitted from the above Images.
#
Can be adjusted freely
Altri manuali AVteq Rack e supporto
AVteq
AVteq PS Series Manuale utente
AVteq
AVteq RPS-500S Guida rapida
AVteq
AVteq Poly TC8 Manuale utente
AVteq
AVteq ELT 2100 Guida rapida
AVteq
AVteq RPS-500 S Guida rapida
AVteq
AVteq DynamiQ RPS-500 Guida rapida
AVteq
AVteq NEAT-BRK Manuale utente
AVteq
AVteq GMP-200L Manuale utente
AVteq
AVteq TC8-WMP Manuale utente
