AWS CQ-350 Manuale utente
American Weigh Scales, Inc.
CQ-350 (350x0.1g)
CQ-500 (500x0.1g) User Manual
CQ-Series
Digital Pocket Scale
AC
CE
%
TARE
OFF
ON
MC
MR
CALI
CAL
M
0
1
4
7
.
2
5
8
=
3
6
9
÷
x
-
+
CALC
MODE
CQ-Series Manual
Thank you for purchasing the American Weigh
CQ-Series digital calculator scale. Please read all
operating instructions carefully before use. This
electronic scale is a precision instrument. With normal
care and proper treatment, it will provide years of
reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimate to
normal room temperature for at least one hour before
use.
Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. WEIGHING
Place Scale on a at, level surface.
1. Press [ ON/OFF ] key to turn the scale on.
2. Wait until "0.0” is displayed.
3. Place the object(s) to be weighed onto the weighing
platform.
4. By pressing the [
MODE
] key, you can switch
between weighing units.
II. PRICE CALCULATING
1. The scale starts up in Price Calculating mode by
default. To switch back to Price Calculating mode from
Weighing, or Calculator mode, press the [ ] key.
2. The display will show "SUM", "PRI", and "0.0g".
3. Place the object(s) to be weighed onto the weighing
platform.
4. Enter the unit price using the numeric keypad. The
unit price will be displayed after "PRI". The total price
will be displayed after "SUM". Weight is still displayed
on the top line.
5. To clear the unit price, press the [ CE ] key.
6. The [ AC ] button can be used to lock the weight.
Press once more to unlock.
Note: The “+”, “ –” , “x”, “÷”, “=” , “%”, “M”, “MC” and
“MR” keys are invalid in this mode.
III. WEIGHT ONLY
1. Press [ ON/OFF ] key to turn the scale on.
2. Press the [ ] key to switch to Weight Only
mode.
3. Place the object(s) to be weighed onto the weighing
platform.
4. By pressing the [
MODE
] key, you can switch
between weighing units.
5. The [ AC ] button can be used to lock the weight.
Press once more to unlock.
Note: The “+”, “ –” , “x”, “÷”, “=” , “%”, “M”, “MC” and
“MR” keys are invalid in this mode.
IV. CALCULATOR MODE
1. Press [ ON/OFF ] key to turn the scale on.
2. Press the [ CALC ] key to switch to Calculator
Mode. You may now use the scale as you would a
normal calculator.
3. Press the [ CE ] key to clear the calculated result.
4. Press the [ M ] key to store the calculated result.
The [ MR ] key will recall the last result stored. Each
new result stored will overwrite the previous one.
5. Press the [ MC ] key to clear the result stored in
memory.
V. TARE WEIGHING
1. Turn on scale as described above.
2. Place a tray or container on the scale platform.
3. Press [ TARE
] and wait until "0.0" is displayed.
4. You can now add items to the container or tray to
obtain just the weight of the contents.
VI. CALIBRATION
Calibration is NOT required before rst use. Only
calibrate if the scale is not weighing properly.
The CQ-500 calibrates with a 500g weight*
The CQ-350 calibrates with a 350g weight*
*Weight not included.
1. Turn on the scale by pressing the [ ON/OFF ] key.
2. Wait until the LCD displays “0.0” , then press and
HOLD the [ CALI ] key for 5 seconds. The LCD will
display “0”. You may now release the [ CALI ] key.
3. The display will ash the required calibration weight.
Place the required weight on the platform. (see above)
4. The display will show “PASS” and return to normal
weighing mode.
5. Put away the calibration weight and press
[ ON/OFF ] to turn off the scale. Calibration is nished!
VII. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
-----------------------------------------------
[OUT2] Recalibrate the scale (Section VI).
[EE] You are overloading the scale. Remove the
excessive load immediately!
[LO] Replace the batteries.
Model CQ-350 CQ-500
Capacity 350g
12.35oz
11.25ozt
225.1dwt
500.0g
17.64oz
16.08ozt
321.5dwt
Resolution 0.1g
0.01oz
0.01ozt
0.1dwt
0.1g
0.01oz
0.01ozt
0.1dwt
Weighing Units g, oz, ozt, dwt
Calibration Weight (not Included) 350g 500g
Platform Dimensions (inches) 3.5 x 3.4 “
Scale Dimensions (inches) 5.7 x 4.1 x 0.8”
Power 3 x AAA Batteries (included)
Warranty 10 Year Warranty
Specications
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali AWS Scala
AWS
AWS EPSILON EP-5KG Manuale utente
AWS
AWS CP2-100 Manuale utente
AWS
AWS PP-50 Manuale utente
AWS
AWS BLADE-50 Manuale utente
AWS
AWS MERCURY PRO MPR-180 Manuale utente
AWS
AWS Gemini-20 Manuale utente
AWS
AWS LB-SERIES Manuale utente
AWS
AWS CP2-300 Manuale utente
AWS
AWS mini PRO-50 Manuale utente
AWS
AWS QUANTUM Istruzioni per il montaggio
AWS
AWS LB-1000 Manuale utente
AWS
AWS AMW-150DR Manuale utente
AWS
AWS HB-6 Manuale utente
AWS
AWS KG-Series Manuale utente
AWS
AWS Digital Kitchen Scale Manuale utente
AWS
AWS NutriBalance-5000 Manuale utente
AWS
AWS SG-300 Manuale utente
AWS
AWS NutriBalance-5000 Manuale utente
AWS
AWS BT2-201 Manuale utente
AWS
AWS PS-25 Manuale utente
