AWS DigiPEN-500 Manuale utente

Indice

Manuali Scala popolari di altre marche

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente

Fidelity Electronics

Fidelity Electronics G2e Manuale utente

American Weigh Scales, Inc.

User Manual

Digital Hanging Scale

DigiPEN-500

DigiPen-500 Manual

Thank you for purchasing the American Weigh

DigiPen-500 digital hanging scale. Please read all

operating instructions carefully before use. This

electronic scale is a precision instrument. With normal

care and proper treatment, it will provide years of

reliable service.

Never load the scale with more than the maximum

capacity. Overloading will permanently damage it!

Avoid any exposure to extreme heat or cold. Your

scale works better when operated at normal room

temperature. Always allow the scale to acclimate to

normal room temperature for at least one hour before

use. Give your scale sufcient warm up time. Usually

30-60 seconds before calibration to give the internal

components a chance to stabilize.

Keep your scale in a clean environment. Dust, dirt,

moisture, vibration, air currents and a close distance to

other electronic equipment can all cause an adverse

effect on the reliability and accuracy of your scale.

Handle with care. Gently apply all items to be weighed

onto the hook. Although this scale is designed to be

quite durable, try to avoid rough treatment as this may

permanently damage the internal sensor.

Avoid shaking, dropping or otherwise shocking the

scale. This is a precision instrument and must be

handled with extreme care.

Only operate the scale on a stable, vibration free

surface.

I. OPERATION

It is recommended to hang the scale from a stable

support for best results.

1. Press [ON/OFF/TARE] key.

2. Wait until "0.0” is displayed.

3. Hang the item on the hook or attach it to the clip.

4. Using the [MODE] key, you can switch between

weighing units.

5. To turn the scale off, press and hold the [ON/OFF/

TARE] key.

II. TARE WEIGHING

1. Turn on scale as described above.

2. Place the "tare item" on the hook (such as another

hook accessory or empty bag).

3. Press [ON/OFF/TARE] key briey and wait until

"0.0" is displayed.

4. Add the "net-weight-item".

III. CALIBRATION

Calibration is NOT required before rst use. Only

calibrate if scale is not weighing properly. This scale

calibrates with 500g.

1.With the scale off, press the [ON/OFF/TARE] key

once to turn the scale on, then quickly press the

[ON/OFF/TARE] key four more times and hold it. A

random number will display, you can now release

the [ON/OFF/TARE] key.

2. Press the [ON/OFF/TARE] key one more time. The

scale will display "Zero" followed by "500g".

3. Gently hang the included 500g calibration hook

weight on the scales hook. Now press the [ON/OFF/

TARE] key one last time.

4. The scale will show "PASS". Calibration is complete.

IV. TROUBLESHOOTING

The primary reasons for inaccuracy or malfunction

are low batteries, incorrect calibration, overload or

operating under unstable conditions. Please keep this

in mind and maintain and operate your scale properly.

This scale is a precise instrument and must be

handled with the utmost care and caution.

[Display] Solution:

Nothing, ,

Change the batteries.

[EEEEE] You are overloading the scale. Remove the

excessive load immediately!

[Oue2] The delicate weighing load cell has

been damaged by misusing the scale

(i.e. it was shocked, dropped or

overloaded). You can try recalibrating the

scale. If the load cell has not been

damaged too much it will work

again after recalibration.

Model DigiPen-500

Capacity 500g

17.64oz

16.08ozt

321.5dwt

Resolution

0.1g / 0.005oz / 0.005ozt / 0.1dwt

Calibration Weight

(Included) 500g

Scale Dimensions

(inches) 1.0 x 1.2 x 6.2 “

Power 2 x AG8 Button Cell Batteries (included)

Specications