AWS V2-500 Manuale utente

Indice

Altri manuali AWS Scala

Manuali Scala popolari di altre marche

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente

Fidelity Electronics

Fidelity Electronics G2e Manuale utente

American Weigh Scales, Inc.

V2-500 (500x0.1g) User Manual

V2-500

Digital Pocket Scale

V2-500 Manual

Thank you for purchasing the American Weigh V2-

500 digital pocket scale. Please read all operating

instructions carefully before use. Scales are precision

instruments and should always be handled with proper

care. To ensure years of reliable service, keep these

simple tips in mind:

• Do not exceed the scales maximum capacity.

Overloading your scale can permanently damage it!

• Avoid exposure to extreme heat or cold. Scales

perform best at normal room temperature. If

temperatures have changed dramatically, recalibration

may be necessary.

• Allow your scale to warm up for 30-60 seconds

before performing calibration (if available).

• Store your scale in a clean, dry location. Dust, dirt,

and moisture can accumulate on the weighing sensors

and electronics causing innacuracy or malfunction.

• Avoid using your scale in close proximity to strong

radio wave emitting devices such as computers, cash

registers, and cordless phones.

• Always weigh on a at and level surface, free from

vibrations and drafts. The corner of a room is usually

the most stable.

• Gently apply all items to be weighed. Do not drop

items onto the weighing platform.

• Avoid dropping your scale. The warranty does not

cover damage due to rough treatment or overload.

I. OPERATION

Place Scale on a horizontal at surface.

1. Press [ ] key.

2. Wait until "0.0” or is displayed.

3. Place the object(s) on the weighing platform.

4. By tapping the [

M

] key, you can switch between

weighing units.

5. The removable lid can also be used as a weighing

tray.

II. TARE WEIGHING

1. Turn on scale as described above.

2. Place a tray or container on the scale platform.

3. Press [ T

] and wait until "0.0" or is displayed.

4. You can now add items to the container or tray to

obtain just the weight of the contents.

III. CALIBRATION

Calibration is NOT required before rst use. Only

calibrate if scale is not weighing properly.

**Make sure you use the correct calibration weight for

your scale or the calibration will not be accurate**

V2-500: 500g calibration weight

1. Turn on scale as described above.

2. Press and hold the [ M

] key, until the LCD displays

"CAL".

3. Press the [ M

] key once more. The dispay will ash

"CAL" followed by "500.0".

4. At this point, place a 500g calibration weight (not

included) onto the center of the weighing platform and

wait for the display to show "PASS".

5. Calibration is complete

V. TROUBLESHOOTING

The primary reasons for inaccuracy or malfunction

are low batteries, incorrect calibration, overload or

operating on an unstable surface. Please keep this in

mind and maintain and operate your scale properly.

This scale is a precise instrument and must be

handled with the utmost care and caution.

[Display] Elimination of errors

-----------------------------------------------

[OUT2] Recalibrate the scale as shown above.

[HHHH] You are overloading the scale. Remove the

excessive load immediately!

[unST] Use the scale in a more stable position

Model V2-500

Capacity 500.0g / 17.635oz / 16.075ozt / 321.5dwt

Resolution 0.1g / 0.01oz / 0.01ozt / 0.1dwt

Weighing Units g, oz, ozt, dwt

Calibration Weight (not Included) 500g

Platform Dimensions (inches) 1.9 x 2.1

Scale Dimensions (inches) 4.2 x 2.1 x 0.6”

Power 2 x AAA Batteries (included)

Warranty 10 Year Limited Warranty

Specications